Opel Corsa 2013 Key Fob & Car Keys
Keys that fit the 2007–2013 Opel Corsa: transponder keys. 1 compatible key, remote & shell (genuine and aftermarket) available for the 2013 Opel Corsa.
Last updated: 29 October 2026
Key specifications for the Opel Corsa 2007–2013
- Key types
- transponder keys, key shells and emergency blades
- Blade profile
- HU100
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Opel parts catalogue, with the specifications on each listing.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
Programming the Opel Corsa 2013 key
Key with a blade (regular or flip)
Programming steps
Add key - OBD key programmer with the Opel / Vauxhall Corsa D BCM menu (Smart Pro, OBDSTAR, Lonsdor K518) or Opcom with the Car Pass code(GCC / Europe cars)
Needs: working key, new ID46 (PCF7941) remote key cut to the car (HU100), 4-digit security code from the Car Pass, or PIN read by OBD, every key the customer keeps
- Connect the tool at the OBD port in the lower centre console.
- Open Opel / Vauxhall, Corsa D, body control module (BCM), immobiliser programming.
- Enter the 4-digit security code from the Car Pass, or let the tool read it from the BCM by OBD.
- Start transponder key programming, insert the new key and switch the ignition on when asked; the remote pairs in the same routine.
- Switch the ignition off and on again, then clear the fault codes.
- Test start, lock and unlock with the new key and with every old key.
Without a tool
The owner's manual describes a resync on the car after a battery change; adding a remote needs a tool.
Programming steps
Program the remote without a tool(GCC / Europe cars)
Needs: the remote key itself (already coded to the car)
- Unlock the driver's door with the key blade in the door lock.
- Switch the ignition on: the remote synchronises.
- Switch off and test lock and unlock with the remote.
When the key changed
Smart key (push to start)
- 2019 - 2024Chip: ID4A433 MHz(GCC / Europe cars)Corsa F (Stellantis CMP, BSI) keyless entry and start key
Key with a blade (regular or flip)
- 2000 - 2006Chip: ID40433 MHz(GCC / Europe cars)Corsa C remote head key or transponder key (Vauxhall Corsa C)
- 2006 - 2014This yearChip: ID46433 MHzBlade: HU100(GCC / Europe cars)Corsa D remote or flip key; PCF7941 keys only, PCF7946 clones fail
- 2019 - 2024Chip: ID4ABlade: HU83(GCC / Europe cars)Corsa F flip remote key, trims without keyless entry
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Opel Corsa 2007–2013?
1 listing fit the Opel Corsa 2007–2013: transponder keys, key shells and emergency blades. Match the part number or FCC ID printed on your original key with the specifications on each listing.
Which blade profile does the Opel Corsa 2007–2013 key use?
The blades listed for this car: HU100.
Can the Opel Corsa 2007–2013 remote be programmed without a tool?
The owner's manual describes a resync on the car after a battery change; adding a remote needs a tool.
