Peugeot 2008 2017–2018 Key Fob & Car Keys
1 compatible key, remote & shell (genuine and aftermarket) available for the 2017 Peugeot 2008.
Last updated: 12 November 2026
Key specifications for the Peugeot 2008 2017–2018
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Peugeot parts catalogue, with the specifications on each listing.
Shells and blades reuse the original electronics, and a blade needs cutting by a locksmith. We ship worldwide from the UAE by DHL and FedEx.
Programming the Peugeot 2008 2017 key
Key with a blade (regular or flip)
Programming steps
Add key - OBD key programmer with the PSA BSI menu (Lonsdor K518, OBDSTAR, Launch X431 IMMO, Abrites AVDI)(GCC / Europe cars)
Needs: working key, new ID46 remote key cut to the car (PCF7941, HU83), PIN read by OBD, battery support unit, every key the customer keeps
- Connect the tool at the OBD port, put the car on battery support and switch the ignition on.
- Read the PIN from the BSI with the tool's PSA PIN function; some BSI types ask for several ignition off / on cycles during the read.
- Open key programming for the Peugeot 2008 (BSI), enter the PIN and give the number of keys to learn.
- Close all doors and the tailgate, then follow the ignition off / on prompts.
- Insert each key in the ignition in turn when asked, the new one and every old key the customer keeps.
- Test start, lock and unlock with every key. If a remote does not respond, switch the ignition on and press a remote button twice.
All keys lost - OBD key programmer with the PSA BSI menu (Lonsdor K518, OBDSTAR, Launch X431 IMMO, Abrites AVDI)(GCC / Europe cars)
Needs: new ID46 remote keys cut to the car (decode the lock first, HU83), PIN read by OBD, battery support unit
- Decode the lock and cut the new keys; a cut key turns the ignition before it is learned.
- Connect at the OBD port with the car on battery support and switch the ignition on with a cut key.
- Run the all-keys-lost PIN read on the BSI (automatic scan in most tools) and note the result in the job card only.
- Open key programming, enter the PIN and give the number of keys to learn.
- Insert each new key in the ignition in turn and follow the prompts until every key is learned.
- Test start, lock and unlock with every key; if a remote does not respond, switch the ignition on and press a remote button twice.
Without a tool
Programming steps
Program the remote without a tool(GCC / Europe cars)
Needs: the remote key itself (already coded to the car)
- Unlock the car with the key blade in the door lock.
- Switch the ignition off, then turn the key to position 2 (ignition on).
- Straight away, hold the lock (closed padlock) button for a few seconds.
- Switch off, take the key out and test lock and unlock with the remote.
When the key changed
Key with a blade (regular or flip)
- 2013 - 2017This yearChip: ID46433 MHzBlade: HU83(GCC / Europe cars)2008 I (A94) remote or flip key; 2017 facelift cars on: read the key
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
