Skip to content

Peugeot 308 2014–2015 Key Fob & Car Keys

Keys that fit the 2014–2015 Peugeot 308: smart keys and transponder keys, 3 buttons, FCC ID A01TAB, ID46 (HITAG 2) chip, 433 MHz. 11 compatible keys, remotes & shells (genuine and aftermarket) available for the 2014 Peugeot 308.

Last updated: 12 November 2026

Key specifications for the Peugeot 308 2014–2015

Key types
smart keys, transponder keys, key shells, emergency blades and key blanks
Frequency
433 MHz
Buttons
3-button
Transponder chip
ID46 (HITAG 2)
Blade profile
HU83 · VA2
Part numbers
1609531980 · 98124195ZD
Battery
CR2032
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Peugeot parts catalogue, with the specifications on each listing. Every remote listed for the Peugeot 308 2014–2015 transmits on 433 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Peugeot 308 2014 key

Smart key (push to start)

One tool lists this key.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD

Key with a blade (regular or flip)

One tool lists this key.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    no PIN needed · reads the PIN by OBD

Programming steps

Add key - OBD key programmer with the PSA BSI menu (Lonsdor K518, OBDSTAR, Launch X431 IMMO, Abrites AVDI)(GCC / Europe cars)

Needs: working key, new ID46 remote key cut to the car (PCF7941 / PCF7961 type), PIN read by OBD, battery support unit, every key the customer keeps

  1. Connect the tool at the OBD port, put the car on battery support and switch the ignition on.
  2. Read the PIN from the BSI with the tool's PSA PIN function; some BSI types ask for several ignition off / on cycles during the read.
  3. Open key programming for the Peugeot 308 (BSI), enter the PIN and give the number of keys to learn.
  4. Close all doors and the tailgate, then follow the ignition off / on prompts.
  5. Insert each key in the ignition in turn when asked, the new one and every old key the customer keeps.
  6. Test start, lock and unlock with every key. If a remote does not respond, switch the ignition on and press a remote button twice.
Watch out: The session learns the keys you present: bring every key the customer keeps. Low voltage at the BSI makes the PIN read fail; keep the battery supported.

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key
    PIN read function

Without a tool

The owner's manual describes a resync on the car after a battery change; adding a remote needs a tool.

Programming steps

Program the remote without a tool(GCC / Europe cars)

Needs: the remote key itself (already coded to the car)

  1. Unlock the car with the key blade in the door lock.
  2. Switch the ignition off, then turn the key to position 2 (ignition on).
  3. Straight away, hold the lock (closed padlock) button for a few seconds.
  4. Switch off, take the key out and test lock and unlock with the remote.
Watch out: This only re-initialises a remote already coded to the car, after a battery change or a flat car battery. A new or replacement key is programmed with a tool through the BSI.

When the key changed

Smart key (push to start)

  • 2014 - 2016This yearChip: ID46(GCC / Europe cars)308 T9 keyless entry and start trims
  • 2017 - 2021Chip: ID4A433 MHz(GCC / Europe cars)308 T9 facelift, keyless entry and start trims
  • from 2021Chip: ID4A(GCC / Europe cars)308 third generation (P5)

Key with a blade (regular or flip)

  • 2007 - 2013Chip: ID46(GCC / Europe cars)308 T7 (first generation), flip key
  • 2014 - 2016This yearChip: ID46(GCC / Europe cars)308 T9 (second generation), flip key
  • 2017 - 2021Chip: ID4A433 MHzBlade: HU83(GCC / Europe cars)308 T9 facelift, flip key

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Peugeot 308 2014–2015?

11 listings fit the Peugeot 308 2014–2015: smart keys, transponder keys, key shells, emergency blades and key blanks, in 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Peugeot 308 2014–2015 remote use?

Every remote listed for the Peugeot 308 2014–2015 transmits on 433 MHz.

Which transponder chip does the Peugeot 308 2014–2015 key use?

The listings for this car carry: ID46 (HITAG 2). Check the chip in each listing's specifications.

Which FCC IDs do Peugeot 308 2014–2015 remotes carry?

The remotes listed for this car carry FCC ID A01TAB. Match it with the FCC ID printed on your original remote.

Which blade profile does the Peugeot 308 2014–2015 key use?

The blades listed for this car: HU83 · VA2.

Which tools program a Peugeot 308 2014–2015 key?

The tool makers' coverage lists name OBDSTAR Key Master G3 and Launch X-431 IMMO for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.

Can the Peugeot 308 2014–2015 remote be programmed without a tool?

The owner's manual describes a resync on the car after a battery change; adding a remote needs a tool.