Skip to content

Peugeot Partner 2007 Key Fob & Car Keys

Keys that fit the 2007 Peugeot Partner: remote keys and transponder keys, 2 buttons, ID46 (HITAG 2) chip, 433 MHz. 3 compatible keys, remotes & shells (genuine and aftermarket) available for the 2007 Peugeot Partner.

Last updated: 15 November 2026

Key specifications for the Peugeot Partner 2007

Key types
remote keys, transponder keys, key shells, emergency blades and key blanks
Frequency
433 MHz
Buttons
2-button
Transponder chip
ID46 (HITAG 2)
Blade profile
SX9 · VA2

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Peugeot parts catalogue, with the specifications on each listing. Every remote listed for the Peugeot Partner 2007 transmits on 433 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Peugeot Partner 2007 key

Key with a blade (regular or flip)

One tool lists this key.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    no PIN needed · reads the PIN by OBD

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key
    PIN read function

Without a tool

The owner's manual describes a resync on the car after a battery change; adding a remote needs a tool.

Programming steps

Program the remote without a tool(GCC / Europe cars)

Needs: the remote key itself (already coded to the car)

  1. Switch the ignition off, then switch it on again.
  2. Straight away, hold the lock button for a few seconds.
  3. Switch the ignition off and take the key out of the ignition.
  4. Test lock and unlock with the remote.
Watch out: This only re-initialises a remote already coded to the van, after a battery change or a flat van battery. A new or replacement key is programmed with a tool.

When the key changed

Key with a blade (regular or flip)

  • 1997 - 2001Chip: ID33Blade: SX9(GCC / Europe cars)Partner I (M59) early cars, transponder key with SX9 blade
  • 2002 - 2008This yearChip: ID46(GCC / Europe cars)Partner I phase 2 (Partner Origin), remote key or plain key
  • 2008 - 2017Chip: ID46433 MHz(GCC / Europe cars)Partner II (B9) remote or flip key, VA2 or HU83 blade
  • 2018 - 2023Chip: ID4A433 MHzBlade: HU83(GCC / Europe cars)Partner III / Rifter (K9) flip key; 2024 facelift cars: read the key

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Peugeot Partner 2007?

3 listings fit the Peugeot Partner 2007: remote keys, transponder keys, key shells, emergency blades and key blanks, in 2-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Peugeot Partner 2007 remote use?

Every remote listed for the Peugeot Partner 2007 transmits on 433 MHz.

Which transponder chip does the Peugeot Partner 2007 key use?

The listings for this car carry: ID46 (HITAG 2). Check the chip in each listing's specifications.

Which blade profile does the Peugeot Partner 2007 key use?

The blades listed for this car: SX9 · VA2.

Which tools program a Peugeot Partner 2007 key?

The tool makers' coverage lists name OBDSTAR Key Master G3 and Launch X-431 IMMO for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.

Can the Peugeot Partner 2007 remote be programmed without a tool?

The owner's manual describes a resync on the car after a battery change; adding a remote needs a tool.