Pontiac Grand Prix 2000 Key Fob & Car Keys
Keys that fit the 1999–2000 Pontiac Grand Prix: smart keys and remote keys, 4 buttons, FCC ID AB00204T, 315 MHz. 1 compatible key, remote & shell (genuine and aftermarket) available for the 2000 Pontiac Grand Prix.
Key specifications for the Pontiac Grand Prix 1999–2000
- Key types
- smart keys and remote keys
- Frequency
- 315 MHz
- Buttons
- 4-button
- Battery
- CR2032
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Pontiac parts catalogue, with the specifications on each listing. Every remote listed for the Pontiac Grand Prix 1999–2000 transmits on 315 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
Programming the Pontiac Grand Prix 2000 key
Key with a blade (regular or flip)
Programming steps
Add key - on the car(US / Canada cars)
Needs: one working key, new key cut to the vehicle (PK3 stamped)
- Cut the new key (PK3 stamped on the blade); have one key that already starts the vehicle.
- Start the engine with the working key, then turn it to OFF and remove it.
- Within five seconds insert the new key and turn it to RUN.
- The security light (or the theft message on the DIC) goes off when the key is learned; this can be too fast to notice.
- Start the engine with the new key; for each further key repeat from step 2.
All keys lost - on the car(US / Canada cars)
Needs: new keys cut to the vehicle (PK3 stamped), 30 minutes
- Cut the new key (PK3 stamped). Have every key the customer keeps; the old keys stop working at the end.
- Insert the new key and turn to ON/RUN without cranking; the security light comes on.
- Wait about 10 minutes until the security light goes off, then turn to LOCK/OFF.
- Repeat ON/RUN, wait 10 minutes, LOCK/OFF two more times (about 30 minutes in all).
- After the third cycle turn OFF, then start the engine with this key: it is learned and every previously known key is erased.
- Learn the remaining keys with the add-key procedure.
Without a tool
The remote is programmed on the car, without a tool.
Programming steps
Program the remote without a tool(US / Canada cars)
Needs: Every remote the customer keeps, A key that fits the ignition
- Remove the key and close all doors.
- Pull the MALL PGM fuse (see the fuse panel legend or the owner's manual).
- Insert the key and turn it to ACC.
- Within 1 second, turn it to OFF and back to ACC.
- Open and close any door. A chime confirms programming mode.
- Hold LOCK and UNLOCK together on the remote for about 14 seconds. A chime may sound at about 7 seconds; keep holding until the second chime, which confirms programming.
- Repeat step 6 for every other remote, old ones included.
- Remove the key, refit the MALL PGM fuse and test the remotes.
When the key changed
Key with a blade (regular or flip)
- 2000 - 2003This yearChip: ID13Blade: B103(US / Canada cars)PASS-Key III key, PK3 stamped on the blade; Megamos 13 chip.
- 2004 - 2008Chip: ID13(US / Canada cars)PASS-Key III key, PK3 stamped; the key blank differs from 2000-2003 cars.
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Pontiac Grand Prix 1999–2000?
1 listing fit the Pontiac Grand Prix 1999–2000: smart keys and remote keys, in 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Pontiac Grand Prix 1999–2000 remote use?
Every remote listed for the Pontiac Grand Prix 1999–2000 transmits on 315 MHz.
Which FCC IDs do Pontiac Grand Prix 1999–2000 remotes carry?
The remotes listed for this car carry FCC ID AB00204T. Match it with the FCC ID printed on your original remote.
Can the Pontiac Grand Prix 1999–2000 remote be programmed without a tool?
The remote is programmed on the car, without a tool.
