Skip to content

Pontiac Montana 2006 Key Fob & Car Keys

Keys that fit the 2006 Pontiac Montana: transponder keys, ID13 or T5 chip. 3 compatible keys, remotes & shells (genuine and aftermarket) available for the 2006 Pontiac Montana.

Last updated: 18 November 2026

Key specifications for the Pontiac Montana 2006

Key types
transponder keys, key shells and emergency blades
Transponder chip
ID13 · T5

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Pontiac parts catalogue, with the specifications on each listing.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Pontiac Montana 2006 key

Key with a blade (regular or flip)

Programming steps

Add key - on the car(US / Canada cars)

Needs: one working key, new key cut to the vehicle (PK3 stamped)

  1. Cut the new key (PK3 stamped on the blade); have one key that already starts the vehicle.
  2. Start the engine with the working key, then turn it to OFF and remove it.
  3. Within 10 seconds insert the new key and turn it to RUN.
  4. The security light goes off when the key is learned (this can be too fast to notice).
  5. Start the engine with the new key; for each further key repeat from step 2.
Watch out: Adds only; never erases keys. Up to 10 keys (owner's manuals). Canadian cars need two working keys (owner's manual).
All keys lost - on the car(US / Canada cars)

Needs: new keys cut to the vehicle (PK3 stamped), 30 minutes

  1. Cut the new key (PK3 stamped). Have every key the customer keeps; the old keys stop working at the end.
  2. Insert the new key and turn to ON/RUN without cranking; the security light comes on.
  3. Wait about 10 minutes until the security light goes off, then turn to LOCK/OFF.
  4. Repeat ON/RUN, wait 10 minutes, LOCK/OFF two more times (about 30 minutes in all).
  5. After the third cycle turn OFF, then start the engine with this key: it is learned and every previously known key is erased.
  6. Within 10 seconds of removing the learned key, insert each further key and turn it to RUN to learn it.
Watch out: All previously learned keys are erased. U.S. only: GM's manuals say Canadian owners must use the dealer. Use a black master key for the first learn; a valet key learned first blocks further keys (service manual).

Without a tool

The remote is programmed on the car, without a tool. Up to 4 remotes.

When the key changed

Key with a blade (regular or flip)

  • 1999 - 2007This yearChip: ID13(US / Canada cars)PK3 key, Megamos 13; B97 key on most vans, some SV6 use a B99 key.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Pontiac Montana 2006?

3 listings fit the Pontiac Montana 2006: transponder keys, key shells and emergency blades. Match the part number or FCC ID printed on your original key with the specifications on each listing.

Which transponder chip does the Pontiac Montana 2006 key use?

The listings for this car carry: ID13 · T5. Check the chip in each listing's specifications.

Can the Pontiac Montana 2006 remote be programmed without a tool?

The remote is programmed on the car, without a tool. Up to 4 remotes.