Skip to content

Scion XB 2010 Key Fob & Car Keys

Keys that fit the 2008–2010 Scion XB: flip keys, 2 buttons, FCC ID GQ429T, HYQ12BBY or HYQ12BDC. 3 compatible keys, remotes & shells (genuine and aftermarket) available for the 2010 Scion XB.

Last updated: 17 November 2026

Key specifications for the Scion XB 2008–2010

Key types
flip keys, key shells and emergency blades
Buttons
2-button
Blade profile
TOY43

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Scion parts catalogue, with the specifications on each listing.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Scion XB 2010 key

Without a tool

The remote is programmed on the car, without a tool.

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: Add mode: add a remote and keep the stored ones, Every remote to be programmed, A key that fits the ignition

  1. Start with the key out, the driver's door open and unlocked.
  2. Insert the key and pull it out, then within 5 seconds insert it and pull it out again.
  3. Inside 40 seconds: shut and open the driver's door two times, then put the key in and take it out once.
  4. Inside the next 40 seconds: shut and open the driver's door two times, put the key in, leave it, and shut the door.
  5. Turn the ignition LOCK to ON to OFF once, about one second ON and one second OFF each time.
  6. Remove the key. The doors lock and unlock once.
  7. Within 40 seconds, press LOCK and UNLOCK together on the remote and release.
  8. Within 3 seconds, press either button and release. The doors cycle once if the remote is stored, twice if it failed.
  9. For each extra remote, go back to step 7 within 40 seconds.
  10. Insert the key in the ignition or open a door to finish.
Program the remote without a tool(US / Canada cars)

Needs: Rewrite mode: erase all remotes and store new ones, Every remote the customer keeps, A key that fits the ignition

  1. Start with the key out, the driver's door open and unlocked.
  2. Insert the key and pull it out, then within 5 seconds insert it and pull it out again.
  3. Inside 40 seconds: shut and open the driver's door two times, then put the key in and take it out once.
  4. Inside the next 40 seconds: shut and open the driver's door two times, put the key in, leave it, and shut the door.
  5. Turn the ignition LOCK to ON to OFF twice, about one second ON and one second OFF each time.
  6. Remove the key. The doors lock and unlock twice: rewrite mode is on.
  7. Within 40 seconds, press LOCK and UNLOCK together on the remote and release.
  8. Within 3 seconds, press either button and release. The doors cycle once if the remote is stored, twice if it failed.
  9. For each extra remote, go back to step 7 within 40 seconds.
  10. Insert the key in the ignition or open a door to finish.
Watch out: Rewrite mode erases every stored remote: program all the remotes the customer keeps.
Program the remote without a tool(US / Canada cars)

Needs: Confirmation mode: count the stored remotes, A key that fits the ignition

  1. Start with the key out, the driver's door open and unlocked.
  2. Insert the key and pull it out, then within 5 seconds insert it and pull it out again.
  3. Inside 40 seconds: shut and open the driver's door two times, then put the key in and take it out once.
  4. Inside the next 40 seconds: shut and open the driver's door two times, put the key in, leave it, and shut the door.
  5. Turn the ignition LOCK to ON to OFF three times, about one second ON and one second OFF each time.
  6. Remove the key. The doors lock and unlock about every 2 seconds: the number of cycles is the number of stored remotes; 5 cycles mean none is stored.
Program the remote without a tool(US / Canada cars)

Needs: Prohibition mode: erase all remotes and switch off remote locking, A key that fits the ignition

  1. Start with the key out, the driver's door open and unlocked.
  2. Insert the key and pull it out, then within 5 seconds insert it and pull it out again.
  3. Inside 40 seconds: shut and open the driver's door two times, then put the key in and take it out once.
  4. Inside the next 40 seconds: shut and open the driver's door two times, put the key in, leave it, and shut the door.
  5. Turn the ignition LOCK to ON to OFF five times, about one second ON and one second OFF each time.
  6. Remove the key. The doors lock and unlock 5 times about 1 second apart.
Watch out: Prohibition mode erases every remote and disables remote locking.

When the key changed

Key with a blade (regular or flip)

  • 2008 - 2010This yearChip: 4D-67315 MHzFCC: HYQ12BBY(US / Canada cars)Cars without anti-theft use a non-transponder key
  • 2013 - 2014Chip: H (8A)315 MHzFCC: HYQ12BDP(US / Canada cars)Anti-theft cars; others use a non-transponder 89070-12590 key

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Scion XB 2008–2010?

3 listings fit the Scion XB 2008–2010: flip keys, key shells and emergency blades, in 2-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

Which FCC IDs do Scion XB 2008–2010 remotes carry?

The remotes listed for this car carry FCC ID GQ429T, HYQ12BBY, HYQ12BDC and M0ZB41TG. Match it with the FCC ID printed on your original remote.

Which blade profile does the Scion XB 2008–2010 key use?

The blades listed for this car: TOY43.

Can the Scion XB 2008–2010 remote be programmed without a tool?

The remote is programmed on the car, without a tool.