Skip to content

Subaru Forester 2011 Key Fob & Car Keys

Keys that fit the 2011 Subaru Forester: remote keys and transponder keys, 3 buttons. 3 compatible keys, remotes & shells (genuine and aftermarket) available for the 2011 Subaru Forester.

Last updated: 3 November 2026

Key specifications for the Subaru Forester 2011

Key types
remote keys, transponder keys, key shells and emergency blades
Buttons
3-button
Blade profile
DAT17
Part numbers
57497FG080

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Subaru parts catalogue, with the specifications on each listing.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Subaru Forester 2011 key

Key type not stated by the list

One tool lists this key.

  • OBDSTAR Key Master G3
    • Add key(non-US cars)
    • All keys lost
    • Remote
    reads the PIN by OBD

Without a tool

The remote is programmed on the car, without a tool. Up to 4 remotes.

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: The 8-digit ID code of each remote (on the package of a new remote, or on the label inside the case), Every remote to be programmed

  1. Close all doors, the trunk included.
  2. Sit in the driver's seat, close the door and go straight to the next step.
  3. Within 15 seconds, turn the ignition from LOCK to ON 10 times. Lights flash and a tone sounds: programming mode. If not, get out of the car and start again.
  4. Open and close the driver's door. The tone keeps sounding: the car is still in programming mode.
  5. While the tone sounds, enter the 8-digit code on the driver's door panel: for each digit press LOCK that many times, then UNLOCK to move on. After the 8th digit press UNLOCK once more.
  6. Enter the full 8-digit code again the same way. After the 8th digit a tone sounds for 30 seconds.
  7. For each extra remote, repeat steps 3 to 6.
  8. Remove the key. Programming is done.
Watch out: Up to 4 remotes can be stored. Disarm the alarm first if fitted. The full code must be entered twice; the 30-second tone after the second entry confirms the remote.

When the key changed

Smart key (push to start)

  • 2014 - 2018Chip: G315 MHzFCC: HYQ14AHC(US / Canada cars)HYQ14AHC from 2016; 2014-2015 keys are HYQ14ACX
  • 2019 - 2025Chip: 8A433 MHzFCC: HYQ14AHK(US / Canada cars)2025 cars can take the newer HYQ14AKB key

Key with a blade (regular or flip)

  • 2005 - 2013This yearChip: 4D-62US cars: 2.5 XT only before 2009
  • 2014 - 2018Chip: GFCC: CWTWB1U811Subaru G (4D-60 80-bit) remote head key
  • 2019 - 2024Chip: H (8A)433 MHzFCC: CWTB1G077(US / Canada cars)Remote head key, turn-key trims

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Subaru Forester 2011?

3 listings fit the Subaru Forester 2011: remote keys, transponder keys, key shells and emergency blades, in 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

Which blade profile does the Subaru Forester 2011 key use?

The blades listed for this car: DAT17.

Which tools program a Subaru Forester 2011 key?

The tool makers' coverage lists name OBDSTAR Key Master G3 for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.

Can the Subaru Forester 2011 remote be programmed without a tool?

The remote is programmed on the car, without a tool. Up to 4 remotes.