Skip to content

Subaru Impreza 2012–2013 Key Fob & Car Keys

Keys that fit the 2012–2013 Subaru Impreza: remote keys, 3 or 4 buttons, FCC ID CWTWB1U811 or 2A0KMSB3, 4D-82 (80-bit) or 4D-60 (80-bit) chip, 315 MHz. 7 compatible keys, remotes & shells (genuine and aftermarket) available for the 2012 Subaru Impreza.

Last updated: 12 November 2026

Key specifications for the Subaru Impreza 2012–2013

Key types
remote keys, key shells and emergency blades
Frequency
315 MHz
Buttons
3- and 4-button
Transponder chip
4D-82 (80-bit) · 4D-60 (80-bit)
Blade profile
DAT17
Part numbers
RT-SB230 · 57497-FJ021
Battery
CR1620
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Subaru parts catalogue, with the specifications on each listing. Every remote listed for the Subaru Impreza 2012–2013 transmits on 315 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Subaru Impreza 2012 key

Key type not stated by the list

One tool lists this key.

  • OBDSTAR Key Master G3
    • Add key(non-US cars)
    • All keys lost(non-US cars)
    • Remote
    reads the PIN by OBD

Without a tool

The remote is programmed on the car, without a tool.

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: Every remote to be programmed, A key that fits the ignition, A flat screwdriver or a small Phillips screwdriver

  1. Open the remote: pop the back cover off with a flat screwdriver (separate remote) or unscrew it with a small Phillips screwdriver (remote-head key).
  2. Write down the 8-digit ID number inside; if there are two rows, use the row with numbers only.
  3. Close all doors, the trunk included.
  4. Sit in the driver's seat, close the door and go straight to the next step.
  5. Within 15 seconds, turn the ignition from LOCK to ON 10 times. Lights flash and a tone sounds: programming mode. If not, get out of the car and start again.
  6. Open and close the driver's door. The tone keeps sounding: the car is still in programming mode.
  7. While the tone sounds, enter the 8-digit code on the driver's door panel: for each digit press LOCK that many times, then UNLOCK to move on. After the 8th digit press UNLOCK once more.
  8. Enter the full 8-digit code again the same way. After the 8th digit a tone sounds for 30 seconds.
  9. For each extra remote, repeat steps 5 to 8.
  10. Remove the key. Programming is done.
Watch out: On a remote-head key this programs only the remote; the key will not start the car until it is cut and its transponder programmed. If a step fails, the whole procedure can be repeated as often as needed.

When the key changed

Smart key (push to start)

  • 2015 - 2016Chip: G315 MHzFCC: HYQ14AHC(US / Canada cars)Push-start trims, board 5801
  • 2017 - 2023Chip: 8A433 MHzFCC: HYQ14AHK(US / Canada cars)Subaru H smart key, 434 MHz in the US

Key with a blade (regular or flip)

  • 1996 - 2000Chip: ID33(GCC / Europe cars)Europe-market cars; US cars of these years have no immobilizer
  • 2001 - 2003Chip: 4D-60(GCC / Europe cars)Separate ignition key; 2004 can be 4D-60 or 4D-62
  • 2005 - 2011Chip: 4D-62US base Impreza from 2008; earlier US cars WRX / STI only
  • 2012 - 2018This yearChip: GFCC: CWTWB1U811Subaru G (4D-60 80-bit); 2019 cars can still be G
  • 2019 - 2023Chip: H (8A)433 MHzFCC: CWTB1G077(US / Canada cars)Remote head key, turn-key trims

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Subaru Impreza 2012–2013?

7 listings fit the Subaru Impreza 2012–2013: remote keys, key shells and emergency blades, in 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Subaru Impreza 2012–2013 remote use?

Every remote listed for the Subaru Impreza 2012–2013 transmits on 315 MHz.

Which transponder chip does the Subaru Impreza 2012–2013 key use?

The listings for this car carry: 4D-82 (80-bit) · 4D-60 (80-bit). Check the chip in each listing's specifications.

Which FCC IDs do Subaru Impreza 2012–2013 remotes carry?

The remotes listed for this car carry FCC ID 2A0KMSB3 and CWTWB1U811. Match it with the FCC ID printed on your original remote.

Which blade profile does the Subaru Impreza 2012–2013 key use?

The blades listed for this car: DAT17.

Which tools program a Subaru Impreza 2012–2013 key?

The tool makers' coverage lists name OBDSTAR Key Master G3 for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.

Can the Subaru Impreza 2012–2013 remote be programmed without a tool?

The remote is programmed on the car, without a tool.