Skip to content

Suzuki Equator 2012 Key Fob & Car Keys

Keys that fit the 2009–2012 Suzuki Equator: transponder keys, CN3 cloning chip chip. 2 compatible keys, remotes & shells (genuine and aftermarket) available for the 2012 Suzuki Equator.

Last updated: 12 November 2026

Key specifications for the Suzuki Equator 2009–2012

Key types
transponder keys, key shells and emergency blades
Transponder chip
CN3 cloning chip
Blade profile
NSN14

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Suzuki parts catalogue, with the specifications on each listing.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Suzuki Equator 2012 key

Key with a blade (regular or flip)

3 tools list this key. 3 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
  • Advanced Diagnostics AD100 Pro / MVP Pro
    • Add key(US / Canada cars)
    • All keys lost(US / Canada cars)
  • Advanced Diagnostics Smart Pro
    • Add key(US / Canada cars)
    • All keys lost(US / Canada cars)

Programming steps

Add key - Advanced Diagnostics Smart Pro / MVP Pro (Nissan CAN keyed ignition)(US / Canada cars)

Needs: working key (any one, to switch ON), PIN read by OBD (BCM code converted to 4-digit PIN by the tool), every key the customer keeps

  1. Gather every key the customer keeps; cut the new ID46 key so it turns the ignition.
  2. Connect by OBD and select Suzuki > Equator (keyed ignition, blade; some tools list the truck under the Nissan Frontier menu) > program keys.
  3. Switch ON with a key in the barrel; the tool reads the BCM code by OBD and converts it to the 4-digit PIN (Equator trucks use the newer conversion).
  4. Confirm programming; the BCM clears its stored keys at this point.
  5. With the key in the barrel, switch ON for about 8 seconds, then OFF and remove it.
  6. Insert the next key (new or existing), ON for about 8 seconds, OFF, remove; repeat for up to 4 keys.
  7. Close the session: switch ON again with the first key for about 8 seconds, then OFF.
  8. Start the engine with every key, then program the remote buttons if they do not work.
Watch out: Programming clears the stored keys: any key not registered in the same session stops starting the car. Plan for 4 keys at most (tool guides say 4; Hyde allows 5 on this truck).
All keys lost - Advanced Diagnostics Smart Pro / MVP Pro (Nissan CAN keyed ignition)(US / Canada cars)

Needs: new keys cut to the lock (code or decode), PIN read by OBD (BCM code converted to 4-digit PIN by the tool)

  1. Cut two or more new ID46 keys to the lock (code or decode) so they turn the ignition.
  2. Connect by OBD and select Suzuki > Equator (keyed ignition, blade; some tools list the truck under the Nissan Frontier menu) > program keys.
  3. Switch ON with a new key; the tool reads the BCM code and works out the 4-digit PIN (no working key needed).
  4. Confirm programming; the BCM clears all stored keys, the lost ones included.
  5. Key in, ON for about 8 seconds, OFF, remove; repeat with each new key (up to 4).
  6. Close the session: switch ON again with the first key for about 8 seconds, then OFF.
  7. Start the engine with every key, then program the remote buttons if they do not work.
Watch out: Bring at least two keys: the lost keys are erased and only the keys programmed now will start the car. If the tool offers an 'old' and a 'new' PIN conversion, the Equator (2009 on) uses the new one.

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key

Without a tool

The remote is programmed on the car, without a tool.

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: every remote the customer keeps

  1. Close all doors and lock them with the driver's power lock switch.
  2. Insert the key and pull it fully out at least 6 times within 10 seconds. The hazard lamps flash when it worked.
  3. Insert the key and turn it to ACC.
  4. Within 5 seconds, press any button on the remote once. The hazard lamps flash.
  5. For each remaining remote, old ones included: unlock then lock with the driver's power lock switch, and within 5 seconds press any button on the next remote once. The hazard lamps flash.
  6. Turn the key OFF and remove it, unlock with the driver's power lock switch and open the driver's door.
Watch out: Programming erases every stored remote: have all remotes on hand and program them all. Press the remote button only once; a second press makes the programming fail. Pull the key fully out each time; going too fast will not enter programming mode.

When the key changed

Key with a blade (regular or flip)

  • 2009 - 2012This yearChip: ID46(US / Canada cars)Nissan Frontier twin; separate keyless fob

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Suzuki Equator 2009–2012?

2 listings fit the Suzuki Equator 2009–2012: transponder keys, key shells and emergency blades. Match the part number or FCC ID printed on your original key with the specifications on each listing.

Which transponder chip does the Suzuki Equator 2009–2012 key use?

The listings for this car carry: CN3 cloning chip. Check the chip in each listing's specifications.

Which blade profile does the Suzuki Equator 2009–2012 key use?

The blades listed for this car: NSN14.

Which tools program a Suzuki Equator 2009–2012 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, Advanced Diagnostics AD100 Pro / MVP Pro, Advanced Diagnostics Smart Pro and Launch X-431 IMMO for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Suzuki Equator 2009–2012 remote be programmed without a tool?

The remote is programmed on the car, without a tool.