SKU: B04763
Toyota Alphard 2015 Key Fob & Car Keys
Keys that fit the 2015 Toyota Alphard: smart keys, 4 buttons, 8A (H-chip) or 4D chip, 312 MHz. 2 compatible keys, remotes & shells (genuine and aftermarket) available for the 2015 Toyota Alphard.
Last updated: 17 November 2026
Key specifications for the Toyota Alphard 2015
- Key types
- smart keys
- Frequency
- 312 MHz
- Buttons
- 4-button
- Transponder chip
- 8A (H-chip) · 4D
- Battery
- CR1632
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Toyota parts catalogue, with the specifications on each listing. Every remote listed for the Toyota Alphard 2015 transmits on 312 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- Lonsdor Super ADP 8A/4A Adapter for Toyota Lexus 2013-2021 Smart Key Programming - K518 Series$182.58
$210.67In Stock
Programming the Toyota Alphard 2015 key
Smart key (push to start)
4 tools list this key. 4 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
Needs: OBDSTAR Key SIM - Add key
- All keys lost(non-US cars)
- Add key
- All keys lost
- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
Programming steps
Add key - Autel MaxiIM IM508 / IM608(GCC / Europe cars)
Needs: working smart key, new smart key for the car, internet connection (if the tool asks for the data backup)
- Connect the VCI to OBD. IMMO > Toyota > select the model > Smart key > Keyless system (CAN).
- If the tool asks for it, run Back up IMMO data first (online) and save the file.
- Add smart key: switch the ignition on with the working key, follow the prompts (ignition off, hazard lights on where asked).
- Hold the working key to the Start button until one beep, then the new key until two beeps.
- Switch on, touch a learned key to the Start button, then test start and the remote buttons.
Add key - Lonsdor K518ISE / K518S / K518 Pro(GCC / Europe cars)
Needs: working smart key, new smart key for the car
- Connect the K518 by OBD. Immobilizer > Toyota > Select from type > (smart key system) > Add smart key.
- Hold the working key to the Start button and press it until the dashboard lights flash.
- Within 30 s hold the new key to the Start button; remove it after two beeps.
- Wait for registration complete, then test start and the remote buttons.
Add key - Lonsdor K518ISE / K518S / K518 Pro(GCC / Europe cars)
Needs: working smart key, Lonsdor Super ADP 8A/4A adapter when the OBD backup fails, new smart key, internet connection
- Immo & Remote > Toyota > Select from type > All smart key lost (2016-) > 8A or 4A > Backup immo data, by OBD or with the ADP adapter on the smart box; save the data.
- Add smart key: switch on with the working key, then ignition off and hazards on when asked; load the saved data.
- Working key to the Start button until one beep, then within 30 s the new key until two beeps.
- Switch on, touch a programmed key to the Start button, then test start and remote.
All keys lost - Autel MaxiIM IM508 / IM608(GCC / Europe cars)
Needs: APB112 smart key simulator, XP400 (IM508), new smart key for the car (OEM or Xhorse / Autel universal), internet connection, no PIN entry (data read by OBD)
- Connect the VCI to OBD (and the APB112 to the tablet). IMMO > Toyota > select the model > Smart key > Keyless system (CAN).
- Back up IMMO data (online): the tool reads the smart box EEPROM by OBD; save the file.
- Generate simulator key: load the saved file, confirm the key type, connect the APB112 and let it be written.
- Hold the APB112 against the Start button and press Start: the dashboard comes on.
- Add smart key: say yes to using the simulator; hold the APB112 to the Start button until one beep, then the new key until two beeps.
- Wait for Registering to finish, then test start and the remote buttons of the new key.
- If the customer wants the lost keys gone, delete the keys not present with the tool's key erase function.
All keys lost - Lonsdor K518ISE / K518S / K518 Pro(GCC / Europe cars)
Needs: LKE 5-in-1 smart key emulator (older SKE emulators per chip type), new smart key for the car, no PIN entry (data read by OBD)
- Bind the LKE emulator to the K518 the first time you use it.
- Connect by OBD. Immobilizer > Toyota > Select from type > All smart key lost > Backup EEPROM (immo data) and save the file.
- Generate the emergency key: put the LKE in the K518 card slot and write it from the saved data.
- Hold the LKE to the Start button and press Start until the dashboard comes on.
- Add smart key: LKE (registered key) to the Start button until one beep, then within 30 s the new key until two beeps.
- Test start and remote; delete lost keys with Delete smart key if the customer wants them gone.
All keys lost - Lonsdor K518ISE / K518S / K518 Pro(GCC / Europe cars)
Needs: LKE emulator (K518ISE / K518S), Lonsdor Super ADP 8A/4A adapter when the OBD backup fails, new smart key (OEM or Lonsdor FT key), internet connection, no PIN from the dealer (the 12-digit code is derived from the backup)
- Bind the LKE emulator to the K518ISE / K518S (the K518 Pro generates the emergency key without an LKE).
- Immo & Remote > Toyota > Select from type > All smart key lost (2016-) > 8A or 4A > Backup immo data. Try by OBD first; if it fails, connect the ADP adapter between the smart box and its harness.
- Turn the hazard lights on when asked, enter the VIN if asked, let the tool calculate online and save the data.
- Refit the smart box plug, connect by OBD, put the LKE in the card slot and generate the emergency key from the saved data.
- Add smart key: switch on with the LKE at the Start button, then ignition off and hazards on when asked; load the saved data.
- Registered key (LKE) to the Start button until one beep, then within 30 s the new key until two beeps.
- Switch on and touch a programmed key to the Start button (one beep), then test start and remote.
- Delete lost keys with Delete smart key if the customer wants them gone.
Key with a blade (regular or flip)
3 tools list this key. 2 of them list all keys lost.
- Launch X-431 IMMO
- Add key
- All keys lost
- Add key
- All keys lost
- OBDSTAR Key Master G3
- Add key
- Remote
All keys lost is listed by Launch X-431 IMMO and Lonsdor K518. OBDSTAR Key Master G3 lists add key only.
Key type not stated by the list
One tool lists this key.
- Add key
- All keys lost
- Remote
- Universal key
When the key changed
Smart key (push to start)
- 2008 - 2015This yearChip: 4D(GCC / Europe cars)Page 94 smart key; Japanese-market keys run on 312 MHz
- 2015 - 2022This yearChip: 8A(GCC / Europe cars)AH30 smart key
- from 2023Chip: 8A(GCC / Europe cars)AH40: page BA smart key, board 3041
Key with a blade (regular or flip)
- 2006 - 2008Chip: 4D-67(GCC / Europe cars)AH10 turn-key cars; 2002-2005 cars may be 4C, read the chip
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Toyota Alphard 2015?
2 listings fit the Toyota Alphard 2015: smart keys, in 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Toyota Alphard 2015 remote use?
Every remote listed for the Toyota Alphard 2015 transmits on 312 MHz.
Which transponder chip does the Toyota Alphard 2015 key use?
The listings for this car carry: 8A (H-chip) · 4D. Check the chip in each listing's specifications.
Which tools program a Toyota Alphard 2015 key?
The tool makers' coverage lists name OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II, Lonsdor K518, XTOOL X100 PAD3 / X100 MAX, Launch X-431 IMMO and Xhorse MINI OBD Tool (FT-OBD) for this car; 6 of them list all keys lost. Check your tool's latest coverage list before the job.

