Skip to content

Toyota Alphard 2016–2017 Key Fob & Car Keys

Keys that fit the 2016–2017 Toyota Alphard: smart keys, 8A (H-chip) chip. 1 compatible key, remote & shell (genuine and aftermarket) available for the 2016 Toyota Alphard.

Last updated: 17 November 2026

Key specifications for the Toyota Alphard 2016–2017

Key types
smart keys
Transponder chip
8A (H-chip)

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Toyota parts catalogue, with the specifications on each listing.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Toyota Alphard 2016 key

Smart key (push to start)

4 tools list this key. 3 of them list all keys lost.

All keys lost is listed by OBDSTAR Key Master G3, Lonsdor K518 and XTOOL X100 PAD3 / X100 MAX. Autel IM608 II / IM608 Pro II lists add key only.

Programming steps

Add key - Lonsdor K518ISE / K518S / K518 Pro(GCC / Europe cars)

Needs: working smart key, Lonsdor Super ADP 8A/4A adapter when the OBD backup fails, new smart key, internet connection

  1. Immo & Remote > Toyota > Select from type > All smart key lost (2016-) > 8A or 4A > Backup immo data, by OBD or with the ADP adapter on the smart box; save the data.
  2. Add smart key: switch on with the working key, then ignition off and hazards on when asked; load the saved data.
  3. Working key to the Start button until one beep, then within 30 s the new key until two beeps.
  4. Switch on, touch a programmed key to the Start button, then test start and remote.
Watch out: Bring every key the customer keeps; check the remote buttons on each after programming. The smart box has 5 key positions in the worked examples; erase unused keys if it is full.
All keys lost - Lonsdor K518ISE / K518S / K518 Pro(GCC / Europe cars)

Needs: LKE emulator (K518ISE / K518S), Lonsdor Super ADP 8A/4A adapter when the OBD backup fails, new smart key (OEM or Lonsdor FT key), internet connection, no PIN from the dealer (the 12-digit code is derived from the backup)

  1. Bind the LKE emulator to the K518ISE / K518S (the K518 Pro generates the emergency key without an LKE).
  2. Immo & Remote > Toyota > Select from type > All smart key lost (2016-) > 8A or 4A > Backup immo data. Try by OBD first; if it fails, connect the ADP adapter between the smart box and its harness.
  3. Turn the hazard lights on when asked, enter the VIN if asked, let the tool calculate online and save the data.
  4. Refit the smart box plug, connect by OBD, put the LKE in the card slot and generate the emergency key from the saved data.
  5. Add smart key: switch on with the LKE at the Start button, then ignition off and hazards on when asked; load the saved data.
  6. Registered key (LKE) to the Start button until one beep, then within 30 s the new key until two beeps.
  7. Switch on and touch a programmed key to the Start button (one beep), then test start and remote.
  8. Delete lost keys with Delete smart key if the customer wants them gone.
Watch out: The car battery must be charged; the data backup needs an internet connection. The simulator / emulator is erased if you use the device for another key job before adding the key: add the new key straight after generating it. The smart box has 5 key positions in the worked examples; erase unused keys if it is full. The ADP adapter is bound to one K518 for good.

Key type not stated by the list

2 tools list this key. 1 of them list all keys lost.

All keys lost is listed by Xhorse MINI OBD Tool (FT-OBD). Launch X-431 IMMO lists add key only.

When the key changed

Smart key (push to start)

  • 2008 - 2015Chip: 4D(GCC / Europe cars)Page 94 smart key; Japanese-market keys run on 312 MHz
  • 2015 - 2022This yearChip: 8A(GCC / Europe cars)AH30 smart key
  • from 2023Chip: 8A(GCC / Europe cars)AH40: page BA smart key, board 3041

Key with a blade (regular or flip)

  • 2006 - 2008Chip: 4D-67(GCC / Europe cars)AH10 turn-key cars; 2002-2005 cars may be 4C, read the chip

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Toyota Alphard 2016–2017?

1 listing fit the Toyota Alphard 2016–2017: smart keys. Match the part number or FCC ID printed on your original key with the specifications on each listing.

Which transponder chip does the Toyota Alphard 2016–2017 key use?

The listings for this car carry: 8A (H-chip). Check the chip in each listing's specifications.

Which tools program a Toyota Alphard 2016–2017 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, Lonsdor K518, XTOOL X100 PAD3 / X100 MAX, Autel IM608 II / IM608 Pro II, Xhorse MINI OBD Tool (FT-OBD) and Launch X-431 IMMO for this car; 4 of them list all keys lost. Check your tool's latest coverage list before the job.