Toyota Altis 2011–2014 Key Fob & Car Keys
Keys that fit the 2011–2014 Toyota Altis: transponder keys, 4D-72 (G) chip. 1 compatible key, remote & shell (genuine and aftermarket) available for the 2011 Toyota Altis.
Last updated: 3 November 2026
Key specifications for the Toyota Altis 2011–2014
- Key types
- transponder keys, emergency blades and key blanks
- Transponder chip
- 4D-72 (G)
- Blade profile
- TOY43
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Toyota parts catalogue, with the specifications on each listing.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $4.18In Stock
Programming the Toyota Altis 2011 key
Key with a blade (regular or flip)
2 tools list this key. 2 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
- Add key(non-US cars)
- All keys lost(non-US cars)
Programming steps
Add key - Autel MaxiIM IM508 / IM608(GCC / Europe cars)
Needs: working master key, new key cut to the car with the same chip family (4D, G or H / 8A)
- Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
- Connect the VCI to the OBD port. IMMO > Toyota > select the model and year > Blade key > Immobilizer, then the key learning function.
- Insert the working master key and switch the ignition on when asked.
- Remove it, insert the new cut key and leave the ignition off (if learning fails, run it again with the ignition on).
- Wait for the security light to go out: the key is learned. Check it switches on and starts.
All keys lost - Autel MaxiIM IM508 / IM608(GCC / Europe cars)
Needs: new keys cut to the car with blank 4D-67/68 or G chips, no PIN entry (the tool resets by OBD)
- Cut the new keys first, with the chip family of the car (4D-67/68 or G).
- Connect the VCI to the OBD port. IMMO > Toyota > select the model and year > Blade key > Immobilizer > All keys lost (immobilizer reset).
- Answer how many keys you will register and keep the driver door open during learning.
- Follow the ignition prompts (off, on, off and remove the key, on again) while the tool resets the immobilizer.
- Within 120 s register the keys: insert a master key, switch on and wait 5 s; repeat for each further key; with only one or two keys, finish by switching the ignition on and off quickly 5 times.
- The security light goes out when programming is done. Test every key.
When the key changed
Key with a blade (regular or flip)
- 2011 - 2013This yearChip: GBlade: TOY43(GCC / Europe cars)Corolla Altis remote head key 89070-02820; G stamped on the blade
- 2014Chip: H (8A)(GCC / Europe cars)E170 Corolla Altis; 2014 cars may carry G or H, read the blade
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Toyota Altis 2011–2014?
1 listing fit the Toyota Altis 2011–2014: transponder keys, emergency blades and key blanks. Match the part number or FCC ID printed on your original key with the specifications on each listing.
Which transponder chip does the Toyota Altis 2011–2014 key use?
The listings for this car carry: 4D-72 (G). Check the chip in each listing's specifications.
Which blade profile does the Toyota Altis 2011–2014 key use?
The blades listed for this car: TOY43.
Which tools program a Toyota Altis 2011–2014 key?
The tool makers' coverage lists name OBDSTAR Key Master G3 and Autel IM608 II / IM608 Pro II for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.
