Skip to content

Toyota Altis 2014 Key Fob & Car Keys

Keys that fit the 2011–2014 Toyota Altis: transponder keys, 4D-72 (G) chip. 1 compatible key, remote & shell (genuine and aftermarket) available for the 2014 Toyota Altis.

Last updated: 3 November 2026

Key specifications for the Toyota Altis 2011–2014

Key types
transponder keys, emergency blades and key blanks
Transponder chip
4D-72 (G)
Blade profile
TOY43

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Toyota parts catalogue, with the specifications on each listing.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Toyota Altis 2014 key

Key with a blade (regular or flip)

2 tools list this key. 2 of them list all keys lost.

Programming steps

Add key - Autel MaxiIM IM508 / IM608(GCC / Europe cars)

Needs: working master key, new key cut to the car with the same chip family (4D, G or H / 8A)

  1. Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
  2. Connect the VCI to the OBD port. IMMO > Toyota > select the model and year > Blade key > Immobilizer, then the key learning function.
  3. Insert the working master key and switch the ignition on when asked.
  4. Remove it, insert the new cut key and leave the ignition off (if learning fails, run it again with the ignition on).
  5. Wait for the security light to go out: the key is learned. Check it switches on and starts.
Watch out: A valet key cannot add keys: you need a master key. Use the chip family the car already has: a 4D key will not learn on a G car, a G key not on an H car.
All keys lost - Autel MaxiIM IM508 / IM608(GCC / Europe cars)

Needs: XP400 / XP400 Pro (IM508), G-Box2 or G-Box3, Autel Toyota 8A blade all-keys-lost cable kit, APB112 smart key simulator, blade key without chip (to turn the ignition), new H (8A) key cut to the car, internet connection

  1. IMMO > Toyota > select the model > Blade key > Immobilizer (H 8A/8E) > All keys lost (8A AKL cable). Use the VCI on USB, not Bluetooth.
  2. Wire the 8A kit as the tool's diagram shows for this car: IG and BAT fuses in the fuse boxes and the ignition switch (KSW) plug; connect G-Box and kit to the tablet and OBD.
  3. Insert a blade without chip, switch on and let the tool read the immobilizer data (can take several minutes).
  4. Confirm the key type, connect the APB112 and let the tool write the simulator key.
  5. Switch off, remove the kit and refit every fuse and plug as original; connect the VCI straight to OBD.
  6. Hold the APB112 against the ignition switch, turn the chipless blade on, then enter the add key step when asked.
  7. Switch off, take the APB112 away, insert the new H key without turning it and wait (5 to 180 s) until the security light goes out.
  8. Test start; program the remote of a remote-head key with the remote learning function.
Watch out: Put every fuse and plug back before starting the car: Xhorse warns the fuse box and the device can burn otherwise. Not for North American H cars (both makers say so); US cars need another route.

When the key changed

Key with a blade (regular or flip)

  • 2011 - 2013Chip: GBlade: TOY43(GCC / Europe cars)Corolla Altis remote head key 89070-02820; G stamped on the blade
  • 2014This yearChip: H (8A)(GCC / Europe cars)E170 Corolla Altis; 2014 cars may carry G or H, read the blade

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Toyota Altis 2011–2014?

1 listing fit the Toyota Altis 2011–2014: transponder keys, emergency blades and key blanks. Match the part number or FCC ID printed on your original key with the specifications on each listing.

Which transponder chip does the Toyota Altis 2011–2014 key use?

The listings for this car carry: 4D-72 (G). Check the chip in each listing's specifications.

Which blade profile does the Toyota Altis 2011–2014 key use?

The blades listed for this car: TOY43.

Which tools program a Toyota Altis 2011–2014 key?

The tool makers' coverage lists name OBDSTAR Key Master G3 and Autel IM608 II / IM608 Pro II for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.