Skip to content

Toyota Avalon 2019 Key Fob & Car Keys

Keys that fit the 2019 Toyota Avalon: smart keys, 2, 3 or 4 buttons, FCC ID HYQ14FBE, 14FCC or BA4EQ, 8A (H-chip) chip, 315 MHz or 433 MHz. 7 compatible keys, remotes & shells (genuine and aftermarket) available for the 2019 Toyota Avalon.

Last updated: 17 November 2026

Key specifications for the Toyota Avalon 2019

Key types
smart keys, key shells and emergency blades
Frequency
315 MHz and 433 MHz
Buttons
2-, 3- and 4-button
Transponder chip
8A (H-chip)
Blade profile
TOY48
Part numbers
8990H-07010 · 89904-33460 · 8990H-07040
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Toyota parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 433 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Toyota Avalon 2019 key

Smart key (push to start)

6 tools list this key. 5 of them list all keys lost.

All keys lost is listed by Lonsdor K518, OBDSTAR Key Master G3, Xhorse VVDI Key Tool Max, Xhorse VVDI Key Tool Plus and XTOOL X100 PAD3 / X100 MAX. Autel IM608 II / IM608 Pro II lists add key only.

Programming steps

Add key - Lonsdor K518ISE / K518S / K518 Pro

Needs: working smart key, Lonsdor Super ADP 8A/4A adapter when the OBD backup fails, new smart key, internet connection

  1. Immo & Remote > Toyota > Select from type > All smart key lost (2016-) > 8A or 4A > Backup immo data, by OBD or with the ADP adapter on the smart box; save the data.
  2. Add smart key: switch on with the working key, then ignition off and hazards on when asked; load the saved data.
  3. Working key to the Start button until one beep, then within 30 s the new key until two beeps.
  4. Switch on, touch a programmed key to the Start button, then test start and remote.
Watch out: Bring every key the customer keeps; check the remote buttons on each after programming. The smart box has 5 key positions in the worked examples; erase unused keys if it is full.
Add key - Xhorse VVDI Key Tool Plus

Needs: working smart key, Xhorse XD8ASKGL Toyota 8A smart key adapter (TOY-C1 / TOY-C2 cables), new smart key (OEM or Xhorse XM38), internet connection

  1. Identify the original key type (8A or 4A) with the Key Tool Plus.
  2. Connect OBD > Key Tool Plus OBD cable > XD8ASKGL adapter > tablet; connect the smart box to the adapter with the TOY-C1 or TOY-C2 cable that fits its plug.
  3. Toyota immo menu > Backup smart box EEPROM data (online); save the file, then refit the smart box plug.
  4. Add smart key: switch on, then off, hazards on; load the saved file. The tool shows registered and free positions.
  5. Working key to the Start button until it beeps, then each new key in turn until it beeps.
  6. Switch on and test start and remote of every key.
Watch out: Bring every key the customer keeps; check the remote buttons on each after programming. The smart box has 5 key positions in the worked examples; erase unused keys if it is full.
All keys lost - Lonsdor K518ISE / K518S / K518 Pro

Needs: LKE emulator (K518ISE / K518S), Lonsdor Super ADP 8A/4A adapter when the OBD backup fails, new smart key (OEM or Lonsdor FT key), internet connection, no PIN from the dealer (the 12-digit code is derived from the backup)

  1. Bind the LKE emulator to the K518ISE / K518S (the K518 Pro generates the emergency key without an LKE).
  2. Immo & Remote > Toyota > Select from type > All smart key lost (2016-) > 8A or 4A > Backup immo data. Try by OBD first; if it fails, connect the ADP adapter between the smart box and its harness.
  3. Turn the hazard lights on when asked, enter the VIN if asked, let the tool calculate online and save the data.
  4. Refit the smart box plug, connect by OBD, put the LKE in the card slot and generate the emergency key from the saved data.
  5. Add smart key: switch on with the LKE at the Start button, then ignition off and hazards on when asked; load the saved data.
  6. Registered key (LKE) to the Start button until one beep, then within 30 s the new key until two beeps.
  7. Switch on and touch a programmed key to the Start button (one beep), then test start and remote.
  8. Delete lost keys with Delete smart key if the customer wants them gone.
Watch out: The car battery must be charged; the data backup needs an internet connection. The simulator / emulator is erased if you use the device for another key job before adding the key: add the new key straight after generating it. The smart box has 5 key positions in the worked examples; erase unused keys if it is full. The ADP adapter is bound to one K518 for good.

Key type not stated by the list

2 tools list this key. 1 of them list all keys lost.

All keys lost is listed by Xhorse MINI OBD Tool (FT-OBD). Launch X-431 IMMO lists add key only.

When the key changed

Smart key (push to start)

  • 2005 - 2012Chip: 4D315 MHzFCC: HYQ14AAF, HYQ14AAB(US / Canada cars)Push-to-start trims only
  • 2013 - 2022This yearChip: 8A315 MHzFCC: HYQ14FBA, HYQ14FBE(US / Canada cars)
  • 2018 - 2020This yearChip: 8A433 MHz(GCC / Europe cars)

Key with a blade (regular or flip)

  • 1998 - 2004Chip: 4CBlade: TOY43
  • 2005 - 2012Chip: 4D-67Blade: TOY43(US / Canada cars)Overlap years may be 4D-67 or G; G is stamped on the blade

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Toyota Avalon 2019?

7 listings fit the Toyota Avalon 2019: smart keys, key shells and emergency blades, in 2-, 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Toyota Avalon 2019 remote use?

Listings for the Toyota Avalon 2019 come in 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Toyota Avalon 2019 key use?

The listings for this car carry: 8A (H-chip). Check the chip in each listing's specifications.

Which FCC IDs do Toyota Avalon 2019 remotes carry?

The remotes listed for this car carry FCC ID 14FCC, BA4EQ and HYQ14FBE. Match it with the FCC ID printed on your original remote.

Which blade profile does the Toyota Avalon 2019 key use?

The blades listed for this car: TOY48.

Which tools program a Toyota Avalon 2019 key?

The tool makers' coverage lists name Lonsdor K518, OBDSTAR Key Master G3, Xhorse VVDI Key Tool Max, Xhorse VVDI Key Tool Plus, XTOOL X100 PAD3 / X100 MAX and Autel IM608 II / IM608 Pro II for this car; 5 of them list all keys lost. Check your tool's latest coverage list before the job.