Skip to content

Toyota Avanza 2011–2014 Key Fob & Car Keys

Keys that fit the 2011–2014 Toyota Avanza: remote keys, 2 buttons, 433 MHz. 1 compatible key, remote & shell (genuine and aftermarket) available for the 2011 Toyota Avanza.

Last updated: 2 October 2026

Key specifications for the Toyota Avanza 2011–2014

Key types
remote keys
Frequency
433 MHz
Buttons
2-button
Part numbers
89070-BZ230

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Toyota parts catalogue, with the specifications on each listing. Every remote listed for the Toyota Avanza 2011–2014 transmits on 433 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Toyota Avanza 2011 key

Key with a blade (regular or flip)

One tool lists this key.

Programming steps

Add key - Lonsdor K518ISE / K518S / K518 Pro(GCC / Europe cars)

Needs: working master key, new key cut to the car with the same chip family (4D, G or H / 8A)

  1. Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
  2. Connect the K518 by OBD. Immobilizer > Toyota > select the model and year (or the 4D-G type menu) > Mechanical key > Add key.
  3. Insert the master key and switch the ignition on.
  4. When asked, insert the new cut key and switch the ignition on and off as the tool prompts.
  5. Wait until the tool reports the key programmed, then test that it starts.
  6. Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons.
Watch out: A valet key cannot add keys: you need a master key. Use the chip family the car already has: a 4D key will not learn on a G car, a G key not on an H car.
All keys lost - Lonsdor K518ISE / K518S / K518 Pro(GCC / Europe cars)

Needs: new keys cut to the car with blank 4D-67/68 or G chips, Lonsdor chip written as Toyota G (optional, G cars), no PIN entry (the tool resets by OBD)

  1. Cut the new keys first. For a G car the chip must be a Toyota G (80-bit); a Lonsdor blank can be written as Toyota G in the K518 (Generate key chip) before you start.
  2. Connect the K518 by OBD. Immobilizer > Toyota > select the model and year > Mechanical key (4D or G type) > Reset immobilizer (all keys lost).
  3. Follow the ignition prompts (off, on, off and remove the key, on again) while the tool resets and configures the immobilizer.
  4. Within 120 s register the keys: insert a master key, switch on and wait 5 s; repeat for each further key; with only one or two keys, finish by switching the ignition on and off quickly 5 times.
  5. The security light goes out when programming is done. Test every key.
  6. Add further keys later with the normal add-key routine and one of the new masters.
  7. Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons. Remotes not learned in this step stop working.
Watch out: The reset erases every registered key: bring every key the customer will keep and program them in the same session. You have about 120 s after the reset to register the keys; have them cut and on the bench before you start. Battery charged and steady during the reset. Not for H (8A) blade cars: no all-keys-lost route for them is written for this model.

When the key changed

Smart key (push to start)

  • 2018 - 2021Chip: ID47433 MHzFCC: CWTWB1G0125(GCC / Europe cars)Push-start trims only; same smart key as the Rush
  • from 2022Chip: 4A(GCC / Europe cars)W100 generation (All New Avanza / Veloz), push-start trims

Key with a blade (regular or flip)

  • 2011 - 2015This yearChip: G(GCC / Europe cars)

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Toyota Avanza 2011–2014?

1 listing fit the Toyota Avanza 2011–2014: remote keys, in 2-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Toyota Avanza 2011–2014 remote use?

Every remote listed for the Toyota Avanza 2011–2014 transmits on 433 MHz.

Which tools program a Toyota Avanza 2011–2014 key?

The tool makers' coverage lists name Lonsdor K518 for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.