Toyota Avanza 2013 Key Fob & Car Keys
Keys that fit the 2011–2014 Toyota Avanza: remote keys, 2 buttons, 433 MHz. 1 compatible key, remote & shell (genuine and aftermarket) available for the 2013 Toyota Avanza.
Last updated: 2 October 2026
Key specifications for the Toyota Avanza 2011–2014
- Key types
- remote keys
- Frequency
- 433 MHz
- Buttons
- 2-button
- Part numbers
- 89070-BZ230
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Toyota parts catalogue, with the specifications on each listing. Every remote listed for the Toyota Avanza 2011–2014 transmits on 433 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
Programming the Toyota Avanza 2013 key
Key with a blade (regular or flip)
4 tools list this key. 2 of them list all keys lost.
- Add key
- All keys lost
- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
- OBDSTAR Key Master G3
- Add key
- Remote
- Add key(non-US cars)
All keys lost is listed by Lonsdor K518 and XTOOL X100 PAD3 / X100 MAX. OBDSTAR Key Master G3 and Autel IM608 II / IM608 Pro II list add key only.
Programming steps
Add key - Autel MaxiIM IM508 / IM608(GCC / Europe cars)
Needs: working master key, new key cut to the car with the same chip family (4D, G or H / 8A)
- Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
- Connect the VCI to the OBD port. IMMO > Toyota > select the model and year > Blade key > Immobilizer, then the key learning function.
- Insert the working master key and switch the ignition on when asked.
- Remove it, insert the new cut key and leave the ignition off (if learning fails, run it again with the ignition on).
- Wait for the security light to go out: the key is learned. Check it switches on and starts.
- Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons.
Add key - Lonsdor K518ISE / K518S / K518 Pro(GCC / Europe cars)
Needs: working master key, new key cut to the car with the same chip family (4D, G or H / 8A)
- Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
- Connect the K518 by OBD. Immobilizer > Toyota > select the model and year (or the 4D-G type menu) > Mechanical key > Add key.
- Insert the master key and switch the ignition on.
- When asked, insert the new cut key and switch the ignition on and off as the tool prompts.
- Wait until the tool reports the key programmed, then test that it starts.
- Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons.
All keys lost - Lonsdor K518ISE / K518S / K518 Pro(GCC / Europe cars)
Needs: new keys cut to the car with blank 4D-67/68 or G chips, Lonsdor chip written as Toyota G (optional, G cars), no PIN entry (the tool resets by OBD)
- Cut the new keys first. For a G car the chip must be a Toyota G (80-bit); a Lonsdor blank can be written as Toyota G in the K518 (Generate key chip) before you start.
- Connect the K518 by OBD. Immobilizer > Toyota > select the model and year > Mechanical key (4D or G type) > Reset immobilizer (all keys lost).
- Follow the ignition prompts (off, on, off and remove the key, on again) while the tool resets and configures the immobilizer.
- Within 120 s register the keys: insert a master key, switch on and wait 5 s; repeat for each further key; with only one or two keys, finish by switching the ignition on and off quickly 5 times.
- The security light goes out when programming is done. Test every key.
- Add further keys later with the normal add-key routine and one of the new masters.
- Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons. Remotes not learned in this step stop working.
Key type not stated by the list
3 tools list this key. 1 of them list all keys lost.
- Add key
- All keys lost
- Remote
- Universal key
- Add key
- Launch X-431 IMMO
- Add key
All keys lost is listed by Xhorse MINI OBD Tool (FT-OBD). Autel IM608 II / IM608 Pro II and Launch X-431 IMMO list add key only.
When the key changed
Smart key (push to start)
- 2018 - 2021Chip: ID47433 MHzFCC: CWTWB1G0125(GCC / Europe cars)Push-start trims only; same smart key as the Rush
- from 2022Chip: 4A(GCC / Europe cars)W100 generation (All New Avanza / Veloz), push-start trims
Key with a blade (regular or flip)
- 2011 - 2015This yearChip: G(GCC / Europe cars)
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Toyota Avanza 2011–2014?
1 listing fit the Toyota Avanza 2011–2014: remote keys, in 2-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Toyota Avanza 2011–2014 remote use?
Every remote listed for the Toyota Avanza 2011–2014 transmits on 433 MHz.
Which tools program a Toyota Avanza 2011–2014 key?
The tool makers' coverage lists name Lonsdor K518, XTOOL X100 PAD3 / X100 MAX, OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II, Xhorse MINI OBD Tool (FT-OBD) and Launch X-431 IMMO for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.
