Skip to content

Toyota Fortuner 2020–2023 Key Fob & Car Keys

Keys that fit the 2020–2023 Toyota Fortuner: smart keys, flip keys and remote keys, 2 or 3 buttons, FCC ID BA2TA, 433 MHz. 5 compatible keys, remotes & shells (genuine and aftermarket) available for the 2020 Toyota Fortuner.

Last updated: 10 November 2026

Key specifications for the Toyota Fortuner 2020–2023

Key types
smart keys, flip keys, remote keys, key shells and emergency blades
Frequency
433 MHz
Buttons
2- and 3-button
Blade profile
KK12 · TOY43 · TOY48
Part numbers
89070-0KC01
Battery
CR2032
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Toyota parts catalogue, with the specifications on each listing. Every remote listed for the Toyota Fortuner 2020–2023 transmits on 433 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Toyota Fortuner 2020 key

Smart key (push to start)

4 tools list this key. 3 of them list all keys lost.

All keys lost is listed by Advanced Diagnostics Smart Pro, OBDSTAR Key Master G3 and Autel IM608 II / IM608 Pro II. Lonsdor K518 lists add key only.

Programming steps

Add key - Autel MaxiIM IM508 / IM608(GCC / Europe cars)

Needs: working smart key, new smart key for the car, internet connection (if the tool asks for the data backup)

  1. Connect the VCI to OBD. IMMO > Toyota > select the model > Smart key > Keyless system (CAN).
  2. If the tool asks for it, run Back up IMMO data first (online) and save the file.
  3. Add smart key: switch the ignition on with the working key, follow the prompts (ignition off, hazard lights on where asked).
  4. Hold the working key to the Start button until one beep, then the new key until two beeps.
  5. Switch on, touch a learned key to the Start button, then test start and the remote buttons.
Watch out: Bring every key the customer keeps; check the remote buttons on each after programming. The smart box has 5 key positions in the worked examples; erase unused keys if it is full.
All keys lost - Autel MaxiIM IM508 / IM608(GCC / Europe cars)

Needs: APB112 smart key simulator, XP400 (IM508), new smart key for the car (OEM or Xhorse / Autel universal), internet connection, no PIN entry (data read by OBD)

  1. Connect the VCI to OBD (and the APB112 to the tablet). IMMO > Toyota > select the model > Smart key > Keyless system (CAN).
  2. Back up IMMO data (online): the tool reads the smart box EEPROM by OBD; save the file.
  3. Generate simulator key: load the saved file, confirm the key type, connect the APB112 and let it be written.
  4. Hold the APB112 against the Start button and press Start: the dashboard comes on.
  5. Add smart key: say yes to using the simulator; hold the APB112 to the Start button until one beep, then the new key until two beeps.
  6. Wait for Registering to finish, then test start and the remote buttons of the new key.
  7. If the customer wants the lost keys gone, delete the keys not present with the tool's key erase function.
Watch out: The car battery must be charged; the data backup needs an internet connection. The simulator / emulator is erased if you use the device for another key job before adding the key: add the new key straight after generating it. The smart box has 5 key positions in the worked examples; erase unused keys if it is full.

Key with a blade (regular or flip)

6 tools list this key. 5 of them list all keys lost.

  • Advanced Diagnostics Smart Pro
    • Add key
    • All keys lost
    • Remote
    online calculation
    Needs: AD ADC2000B cable
  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    • Add key(non-US cars)
    • All keys lost(non-US cars)
  • Launch X-431 IMMO
    • Add key
    • All keys lost
    • Add key
    • All keys lost
  • Advanced Diagnostics AD100 Pro / MVP Pro
    • Add key

All keys lost is listed by Advanced Diagnostics Smart Pro, OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II, Launch X-431 IMMO and Lonsdor K518. Advanced Diagnostics AD100 Pro / MVP Pro lists add key only.

Programming steps

Add key - Autel MaxiIM IM508 / IM608(GCC / Europe cars)

Needs: working master key, new key cut to the car with the same chip family (4D, G or H / 8A)

  1. Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
  2. Connect the VCI to the OBD port. IMMO > Toyota > select the model and year > Blade key > Immobilizer, then the key learning function.
  3. Insert the working master key and switch the ignition on when asked.
  4. Remove it, insert the new cut key and leave the ignition off (if learning fails, run it again with the ignition on).
  5. Wait for the security light to go out: the key is learned. Check it switches on and starts.
  6. Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons.
Watch out: A valet key cannot add keys: you need a master key. Use the chip family the car already has: a 4D key will not learn on a G car, a G key not on an H car.
Add key - Lonsdor K518ISE / K518S / K518 Pro(GCC / Europe cars)

Needs: working master key, new key cut to the car with the same chip family (4D, G or H / 8A)

  1. Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
  2. Connect the K518 by OBD. Immobilizer > Toyota > select the model and year (or the 4D-G type menu) > Mechanical key > Add key.
  3. Insert the master key and switch the ignition on.
  4. When asked, insert the new cut key and switch the ignition on and off as the tool prompts.
  5. Wait until the tool reports the key programmed, then test that it starts.
  6. Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons.
Watch out: A valet key cannot add keys: you need a master key. Use the chip family the car already has: a 4D key will not learn on a G car, a G key not on an H car.
All keys lost - Autel MaxiIM IM508 / IM608(GCC / Europe cars)

Needs: XP400 / XP400 Pro (IM508), G-Box2 or G-Box3, Autel Toyota 8A blade all-keys-lost cable kit, APB112 smart key simulator, blade key without chip (to turn the ignition), new H (8A) key cut to the car, internet connection

  1. IMMO > Toyota > select the model > Blade key > Immobilizer (H 8A/8E) > All keys lost (8A AKL cable). Use the VCI on USB, not Bluetooth.
  2. Wire the 8A kit as the tool's diagram shows for this car: IG and BAT fuses in the fuse boxes and the ignition switch (KSW) plug; connect G-Box and kit to the tablet and OBD.
  3. Insert a blade without chip, switch on and let the tool read the immobilizer data (can take several minutes).
  4. Confirm the key type, connect the APB112 and let the tool write the simulator key.
  5. Switch off, remove the kit and refit every fuse and plug as original; connect the VCI straight to OBD.
  6. Hold the APB112 against the ignition switch, turn the chipless blade on, then enter the add key step when asked.
  7. Switch off, take the APB112 away, insert the new H key without turning it and wait (5 to 180 s) until the security light goes out.
  8. Test start; program the remote of a remote-head key with the remote learning function.
Watch out: Put every fuse and plug back before starting the car: Xhorse warns the fuse box and the device can burn otherwise. Not for North American H cars (both makers say so); US cars need another route.

Key type not stated by the list

One tool lists this key.

When the key changed

Smart key (push to start)

  • 2016 - 2020This yearChip: 8A433 MHz(GCC / Europe cars)

Key with a blade (regular or flip)

  • 2005 - 2010Chip: 4D-67(GCC / Europe cars)
  • 2011 - 2013Chip: G(GCC / Europe cars)
  • 2017 - 2019Chip: H (8A)(GCC / Europe cars)

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Toyota Fortuner 2020–2023?

5 listings fit the Toyota Fortuner 2020–2023: smart keys, flip keys, remote keys, key shells and emergency blades, in 2- and 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Toyota Fortuner 2020–2023 remote use?

Every remote listed for the Toyota Fortuner 2020–2023 transmits on 433 MHz.

Which FCC IDs do Toyota Fortuner 2020–2023 remotes carry?

The remotes listed for this car carry FCC ID BA2TA. Match it with the FCC ID printed on your original remote.

Which blade profile does the Toyota Fortuner 2020–2023 key use?

The blades listed for this car: KK12 · TOY43 · TOY48.

Which tools program a Toyota Fortuner 2020–2023 key?

The tool makers' coverage lists name Advanced Diagnostics Smart Pro, OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II, Lonsdor K518, Launch X-431 IMMO and Advanced Diagnostics AD100 Pro / MVP Pro for this car; 5 of them list all keys lost. Check your tool's latest coverage list before the job.