Toyota Harrier 2003 Key Fob & Car Keys
Keys that fit the 1998–2005 Toyota Harrier: remote keys, 2 buttons. 1 compatible key, remote & shell (genuine and aftermarket) available for the 2003 Toyota Harrier.
Last updated: 7 November 2026
Key specifications for the Toyota Harrier 1998–2005
- Key types
- remote keys, key shells and emergency blades
- Buttons
- 2-button
- Blade profile
- TOY43
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Toyota parts catalogue, with the specifications on each listing.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
Programming the Toyota Harrier 2003 key
Key with a blade (regular or flip)
4 tools list this key. 4 of them list all keys lost.
- Launch X-431 IMMO
- Add key
- All keys lost
- Remote
- Add key
- All keys lost
- Remote
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
- Remote
Programming steps
Add key - Lonsdor K518ISE / K518S / K518 Pro
Needs: working master key, new key cut to the car with the same chip family (4D, G or H / 8A)
- Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
- Connect the K518 by OBD. Immobilizer > Toyota > select the model and year (or the 4D-G type menu) > Mechanical key > Add key.
- Insert the master key and switch the ignition on.
- When asked, insert the new cut key and switch the ignition on and off as the tool prompts.
- Wait until the tool reports the key programmed, then test that it starts.
- Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons.
All keys lost - Lonsdor K518ISE / K518S / K518 Pro
Needs: new keys cut to the car with blank 4D-67/68 or G chips, Lonsdor chip written as Toyota G (optional, G cars), no PIN entry (the tool resets by OBD)
- Cut the new keys first. For a G car the chip must be a Toyota G (80-bit); a Lonsdor blank can be written as Toyota G in the K518 (Generate key chip) before you start.
- Connect the K518 by OBD. Immobilizer > Toyota > select the model and year > Mechanical key (4D or G type) > Reset immobilizer (all keys lost).
- Follow the ignition prompts (off, on, off and remove the key, on again) while the tool resets and configures the immobilizer.
- Within 120 s register the keys: insert a master key, switch on and wait 5 s; repeat for each further key; with only one or two keys, finish by switching the ignition on and off quickly 5 times.
- The security light goes out when programming is done. Test every key.
- Add further keys later with the normal add-key routine and one of the new masters.
- Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons. Remotes not learned in this step stop working.
Key type not stated by the list
2 tools list this key. 2 of them list all keys lost.
- Add key
- All keys lost
- Remote
- Universal key
- Add key
- All keys lost
When the key changed
Smart key (push to start)
- 2014 - 2020Chip: 8AJapan-market XU60 smart key (page A8 on 89904-48F11)
- 2020 - 2026Chip: 8AXU80 page BA key (Venza twin); read the board, 4A menus exist
Key with a blade (regular or flip)
- 2003 - 2008This yearChip: 4D-67Japan-market XU30 key
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Toyota Harrier 1998–2005?
1 listing fit the Toyota Harrier 1998–2005: remote keys, key shells and emergency blades, in 2-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
Which blade profile does the Toyota Harrier 1998–2005 key use?
The blades listed for this car: TOY43.
Which tools program a Toyota Harrier 1998–2005 key?
The tool makers' coverage lists name Launch X-431 IMMO, Lonsdor K518, OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Xhorse MINI OBD Tool (FT-OBD) and Autel IM608 II / IM608 Pro II for this car; 6 of them list all keys lost. Check your tool's latest coverage list before the job.
