Toyota Hiace 2007–2009 Key Fob & Car Keys
1 compatible key, remote & shell (genuine and aftermarket) available for the 2007 Toyota Hiace.
Key specifications for the Toyota Hiace 2007–2009
- Transponder chip
- 4D-67
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Toyota parts catalogue, with the specifications on each listing.
Shells and blades reuse the original electronics, and a blade needs cutting by a locksmith. We ship worldwide from the UAE by DHL and FedEx.
- $1.69In Stock
Programming the Toyota Hiace 2007 key
Key with a blade (regular or flip)
6 tools list this key. 5 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
- Remote
- Add key(non-US cars)
- All keys lost(non-US cars)
- Launch X-431 IMMO
- Add key
- All keys lost
- Add key
- All keys lost
- Advanced Diagnostics Smart Pro
- Add key
All keys lost is listed by OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Autel IM608 II / IM608 Pro II, Launch X-431 IMMO and Lonsdor K518. Advanced Diagnostics Smart Pro lists add key only.
Programming steps
Add key - Autel MaxiIM IM508 / IM608(GCC / Europe cars)
Needs: working master key, new key cut to the car with the same chip family (4D, G or H / 8A)
- Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
- Connect the VCI to the OBD port. IMMO > Toyota > select the model and year > Blade key > Immobilizer, then the key learning function.
- Insert the working master key and switch the ignition on when asked.
- Remove it, insert the new cut key and leave the ignition off (if learning fails, run it again with the ignition on).
- Wait for the security light to go out: the key is learned. Check it switches on and starts.
- Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons.
Add key - Lonsdor K518ISE / K518S / K518 Pro(GCC / Europe cars)
Needs: working master key, new key cut to the car with the same chip family (4D, G or H / 8A)
- Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
- Connect the K518 by OBD. Immobilizer > Toyota > select the model and year (or the 4D-G type menu) > Mechanical key > Add key.
- Insert the master key and switch the ignition on.
- When asked, insert the new cut key and switch the ignition on and off as the tool prompts.
- Wait until the tool reports the key programmed, then test that it starts.
- Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons.
All keys lost - Autel MaxiIM IM508 / IM608(GCC / Europe cars)
Needs: new keys cut to the car with blank 4D-67/68 or G chips, no PIN entry (the tool resets by OBD)
- Cut the new keys first, with the chip family of the car (4D-67/68 or G).
- Connect the VCI to the OBD port. IMMO > Toyota > select the model and year > Blade key > Immobilizer > All keys lost (immobilizer reset).
- Answer how many keys you will register and keep the driver door open during learning.
- Follow the ignition prompts (off, on, off and remove the key, on again) while the tool resets the immobilizer.
- Within 120 s register the keys: insert a master key, switch on and wait 5 s; repeat for each further key; with only one or two keys, finish by switching the ignition on and off quickly 5 times.
- The security light goes out when programming is done. Test every key.
- Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons.
All keys lost - Lonsdor K518ISE / K518S / K518 Pro(GCC / Europe cars)
Needs: new keys cut to the car with blank 4D-67/68 or G chips, Lonsdor chip written as Toyota G (optional, G cars), no PIN entry (the tool resets by OBD)
- Cut the new keys first. For a G car the chip must be a Toyota G (80-bit); a Lonsdor blank can be written as Toyota G in the K518 (Generate key chip) before you start.
- Connect the K518 by OBD. Immobilizer > Toyota > select the model and year > Mechanical key (4D or G type) > Reset immobilizer (all keys lost).
- Follow the ignition prompts (off, on, off and remove the key, on again) while the tool resets and configures the immobilizer.
- Within 120 s register the keys: insert a master key, switch on and wait 5 s; repeat for each further key; with only one or two keys, finish by switching the ignition on and off quickly 5 times.
- The security light goes out when programming is done. Test every key.
- Add further keys later with the normal add-key routine and one of the new masters.
- Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons. Remotes not learned in this step stop working.
Key type not stated by the list
2 tools list this key. 2 of them list all keys lost.
- Add key
- All keys lost
- Remote
- Universal key
- Add key
- All keys lost
When the key changed
Key with a blade (regular or flip)
- 2001 - 2004Chip: 4C(GCC / Europe cars)2004-2006 cars may have 4C or 4D: read the key
- 2005 - 2010This yearChip: 4D-67Blade: TOY43(GCC / Europe cars)
- 2011 - 2013Chip: G(GCC / Europe cars)G is stamped on the blade; 2010 and 2014 overlap
- from 2014Chip: H (8A)(GCC / Europe cars)H is stamped on the blade
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which transponder chip does the Toyota Hiace 2007–2009 key use?
The listings for this car carry: 4D-67. Check the chip in each listing's specifications.
Which tools program a Toyota Hiace 2007–2009 key?
The tool makers' coverage lists name OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Autel IM608 II / IM608 Pro II, Launch X-431 IMMO, Lonsdor K518 and Advanced Diagnostics Smart Pro for this car; 5 of them list all keys lost. Check your tool's latest coverage list before the job.
