Skip to content

Toyota Highlander 2003 Key Fob & Car Keys

Keys that fit the 2001–2003 Toyota Highlander: smart keys, remote keys and transponder keys, 2 buttons, 4C chip. 4 compatible keys, remotes & shells (genuine and aftermarket) available for the 2003 Toyota Highlander.

Last updated: 15 November 2026

Key specifications for the Toyota Highlander 2001–2003

Key types
smart keys, remote keys, transponder keys, key shells, emergency blades and key blanks
Buttons
2-button
Transponder chip
4C
Blade profile
TOY43

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Toyota parts catalogue, with the specifications on each listing.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Toyota Highlander 2003 key

Key with a blade (regular or flip)

5 tools list this key. 2 of them list all keys lost.

  • Launch X-431 IMMO
    • Add key
    • All keys lost
    • Remote
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
  • OBDSTAR Key Master G3
    • Add key
    • Remote
    • Add key
  • Lonsdor KH100
    • Remote

All keys lost is listed by Launch X-431 IMMO and XTOOL X100 PAD3 / X100 MAX. OBDSTAR Key Master G3 and Lonsdor K518 list add key only.

Programming steps

Add key - on the car(US / Canada cars)

Needs: working master key (not the grey valet key), new 4C key cut to the car

  1. Check the customer's key is a master: insert it and the security light goes out at once (a valet key keeps it on for about 2 s).
  2. Close the doors. With no key in the ignition, press and release the accelerator and the brake together once.
  3. Insert the master key without turning it. Within 15 s press and release the accelerator 5 times.
  4. Within 20 s press and release the brake 6 times, then remove the master key.
  5. Within 10 s insert the new key without turning it and press the accelerator once. The security light starts to flash.
  6. Wait about 1 minute (up to 80 s) until the light stops flashing: the key is learned. For one more key, insert it within 10 s and press the accelerator once again.
  7. Remove the last key and press the brake once to finish. Test that every key starts the engine.
Watch out: Timing is strict: if a window is missed, take the key out and start again from step 2. Without a master key this route does not work: all keys lost on a 4C car is an ECU / immobilizer data job. The memory holds a limited number of keys (7 on most of these cars, 3 on the Prius and the 2001-2002 Sequoia); if the new key will not learn, the memory may be full. For 4C cars only: 4D (dot) keys from 2003-2004 onward need a tool.

Key type not stated by the list

2 tools list this key. 2 of them list all keys lost.

Without a tool

The remote is programmed on the car, without a tool.

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: Every remote to be programmed, A key that fits the ignition

  1. Start with the key out, the driver's door open and unlocked, and every other door closed.
  2. Within 5 seconds, insert the key without turning it and pull it out, two times.
  3. Within 40 seconds, close and open the driver's door twice, then insert the key and pull it out once.
  4. Within the next 40 seconds, close and open the driver's door twice, insert the key and leave it in, then close the driver's door.
  5. Turn the ignition to ON without starting, back to OFF, and remove the key.
  6. Within 3 seconds the locks lock and unlock by themselves: the car is in programming mode. If they do not, start again from step 1.
  7. Within 40 seconds, hold LOCK and UNLOCK together on the remote for 1.5 seconds.
  8. Right after releasing them, hold LOCK alone for 2 seconds.
  9. Within 3 seconds the locks lock and unlock once: the remote is accepted. Two cycles mean it was not accepted, repeat steps 7 and 8.
  10. Repeat steps 7 to 9 for each extra remote.
  11. Open the driver's door to end programming.
Watch out: Keep each time window: 5 seconds, then 40 seconds, then 40 seconds; the remote step also has 40 seconds.

When the key changed

Smart key (push to start)

  • 2008 - 2013Chip: 4D315 MHzFCC: HYQ14AAB(US / Canada cars)Push-start trims only
  • 2014 - 2017Chip: 8A433 MHz(GCC / Europe cars)
  • 2014 - 2024Chip: 8A315 MHzFCC: HYQ14FBA, HYQ14FBC, HYQ14FLA, HYQ14FBX(US / Canada cars)Page 88 keys to 2019, AA to 2022, BA from 2023

Key with a blade (regular or flip)

  • 2001 - 2003This yearChip: 4CBlade: TOY43
  • 2004 - 2010Chip: 4D-67Blade: TOY43(US / Canada cars)Overlap years may be 4D-67 or G; G is stamped on the blade
  • 2011 - 2013Chip: GBlade: TOY43(US / Canada cars)
  • 2014 - 2019Chip: H (8A)315 MHzBlade: TOY43FCC: GQ4-52T(US / Canada cars)Turn-key trims; push-start trims use the smart key

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Toyota Highlander 2001–2003?

4 listings fit the Toyota Highlander 2001–2003: smart keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 2-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

Which transponder chip does the Toyota Highlander 2001–2003 key use?

The listings for this car carry: 4C. Check the chip in each listing's specifications.

Which blade profile does the Toyota Highlander 2001–2003 key use?

The blades listed for this car: TOY43.

Which tools program a Toyota Highlander 2001–2003 key?

The tool makers' coverage lists name Launch X-431 IMMO, XTOOL X100 PAD3 / X100 MAX, OBDSTAR Key Master G3, Lonsdor K518, Lonsdor KH100 and Xhorse MINI OBD Tool (FT-OBD) for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Toyota Highlander 2001–2003 remote be programmed without a tool?

The remote is programmed on the car, without a tool.