Skip to content

Toyota Innova 2005 Key Fob & Car Keys

Keys that fit the 2005 Toyota Innova: smart keys and remote keys, 2 or 3 buttons, FCC ID B42TA, 4D-67 chip, 433 MHz. 4 compatible keys, remotes & shells (genuine and aftermarket) available for the 2005 Toyota Innova.

Last updated: 15 November 2026

Key specifications for the Toyota Innova 2005

Key types
smart keys, remote keys and key shells
Frequency
433 MHz
Buttons
2- and 3-button
Transponder chip
4D-67
Blade profile
TOY43
Part numbers
89070-52752
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Toyota parts catalogue, with the specifications on each listing. Every remote listed for the Toyota Innova 2005 transmits on 433 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Toyota Innova 2005 key

Key with a blade (regular or flip)

3 tools list this key. 3 of them list all keys lost.

Programming steps

All keys lost - Autel MaxiIM IM508 / IM608(GCC / Europe cars)

Needs: new keys cut to the car with blank 4D-67/68 or G chips, no PIN entry (the tool resets by OBD)

  1. Cut the new keys first, with the chip family of the car (4D-67/68 or G).
  2. Connect the VCI to the OBD port. IMMO > Toyota > select the model and year > Blade key > Immobilizer > All keys lost (immobilizer reset).
  3. Answer how many keys you will register and keep the driver door open during learning.
  4. Follow the ignition prompts (off, on, off and remove the key, on again) while the tool resets the immobilizer.
  5. Within 120 s register the keys: insert a master key, switch on and wait 5 s; repeat for each further key; with only one or two keys, finish by switching the ignition on and off quickly 5 times.
  6. The security light goes out when programming is done. Test every key.
  7. Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons.
Watch out: The reset erases every registered key: bring every key the customer will keep and program them in the same session. You have about 120 s after the reset to register the keys; have them cut and on the bench before you start. Battery charged and steady during the reset. Not for H (8A) blade cars: no all-keys-lost route for them is written for this model.

Key type not stated by the list

One tool lists this key.

When the key changed

Smart key (push to start)

  • 2016 - 2022Chip: 8A(GCC / Europe cars)Innova Crysta push-start trims; key page 39

Key with a blade (regular or flip)

  • 2005 - 2009This yearChip: 4D-67Blade: TOY43(GCC / Europe cars)

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Toyota Innova 2005?

4 listings fit the Toyota Innova 2005: smart keys, remote keys and key shells, in 2- and 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Toyota Innova 2005 remote use?

Every remote listed for the Toyota Innova 2005 transmits on 433 MHz.

Which transponder chip does the Toyota Innova 2005 key use?

The listings for this car carry: 4D-67. Check the chip in each listing's specifications.

Which FCC IDs do Toyota Innova 2005 remotes carry?

The remotes listed for this car carry FCC ID B42TA. Match it with the FCC ID printed on your original remote.

Which blade profile does the Toyota Innova 2005 key use?

The blades listed for this car: TOY43.

Which tools program a Toyota Innova 2005 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, Launch X-431 IMMO and Autel IM608 II / IM608 Pro II for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.