Skip to content

Toyota IQ 2010 Key Fob & Car Keys

Keys that fit the 2009–2010 Toyota IQ: flip keys and remote keys, 2 buttons, FCC ID 12BBY or B41TA, 433 MHz. 3 compatible keys, remotes & shells (genuine and aftermarket) available for the 2010 Toyota IQ.

Last updated: 17 November 2026

Key specifications for the Toyota IQ 2009–2010

Key types
flip keys, remote keys, key shells and emergency blades
Frequency
433 MHz
Buttons
2-button
Blade profile
TOY43
Part numbers
89070-52752
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Toyota parts catalogue, with the specifications on each listing. Every remote listed for the Toyota IQ 2009–2010 transmits on 433 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Toyota IQ 2010 key

Smart key (push to start)

3 tools list this key. 1 of them list all keys lost.

All keys lost is listed by OBDSTAR Key Master G3. Autel IM608 II / IM608 Pro II and Lonsdor K518 list add key only.

Key with a blade (regular or flip)

5 tools list this key. 4 of them list all keys lost.

  • Launch X-431 IMMO
    • Add key
    • All keys lost
    • Remote
    • Add key
    • All keys lost
    • Remote
  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    • Add key(non-US cars)
    • All keys lost(non-US cars)
  • Advanced Diagnostics AD100 Pro / MVP Pro
    • Add key

All keys lost is listed by Launch X-431 IMMO, Lonsdor K518, OBDSTAR Key Master G3 and Autel IM608 II / IM608 Pro II. Advanced Diagnostics AD100 Pro / MVP Pro lists add key only.

Programming steps

Add key - Autel MaxiIM IM508 / IM608(GCC / Europe cars)

Needs: working master key, new key cut to the car with the same chip family (4D, G or H / 8A)

  1. Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
  2. Connect the VCI to the OBD port. IMMO > Toyota > select the model and year > Blade key > Immobilizer, then the key learning function.
  3. Insert the working master key and switch the ignition on when asked.
  4. Remove it, insert the new cut key and leave the ignition off (if learning fails, run it again with the ignition on).
  5. Wait for the security light to go out: the key is learned. Check it switches on and starts.
Watch out: A valet key cannot add keys: you need a master key. Use the chip family the car already has: a 4D key will not learn on a G car, a G key not on an H car.
All keys lost - Autel MaxiIM IM508 / IM608(GCC / Europe cars)

Needs: new keys cut to the car with blank 4D-67/68 or G chips, no PIN entry (the tool resets by OBD)

  1. Cut the new keys first, with the chip family of the car (4D-67/68 or G).
  2. Connect the VCI to the OBD port. IMMO > Toyota > select the model and year > Blade key > Immobilizer > All keys lost (immobilizer reset).
  3. Answer how many keys you will register and keep the driver door open during learning.
  4. Follow the ignition prompts (off, on, off and remove the key, on again) while the tool resets the immobilizer.
  5. Within 120 s register the keys: insert a master key, switch on and wait 5 s; repeat for each further key; with only one or two keys, finish by switching the ignition on and off quickly 5 times.
  6. The security light goes out when programming is done. Test every key.
Watch out: The reset erases every registered key: bring every key the customer will keep and program them in the same session. You have about 120 s after the reset to register the keys; have them cut and on the bench before you start. Battery charged and steady during the reset. Not for H (8A) blade cars: no all-keys-lost route for them is written for this model.

Key type not stated by the list

One tool lists this key.

When the key changed

Smart key (push to start)

  • 2008 - 2014This yearChip: 4D433 MHz(GCC / Europe cars)Page 98 smart key 89904-47190 (B74EA), keyless trims only

Key with a blade (regular or flip)

  • 2008 - 2010This yearChip: 4D-67433 MHzBlade: TOY43(GCC / Europe cars)2-button remote head key 89070-52752; Europe and Middle East
  • 2012 - 2013Chip: GFCC: MOZB41TG(US / Canada cars)Anti-theft cars; non-transponder keys exist for others

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Toyota IQ 2009–2010?

3 listings fit the Toyota IQ 2009–2010: flip keys, remote keys, key shells and emergency blades, in 2-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Toyota IQ 2009–2010 remote use?

Every remote listed for the Toyota IQ 2009–2010 transmits on 433 MHz.

Which FCC IDs do Toyota IQ 2009–2010 remotes carry?

The remotes listed for this car carry FCC ID 12BBY and B41TA. Match it with the FCC ID printed on your original remote.

Which blade profile does the Toyota IQ 2009–2010 key use?

The blades listed for this car: TOY43.

Which tools program a Toyota IQ 2009–2010 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II, Lonsdor K518, Launch X-431 IMMO, Advanced Diagnostics AD100 Pro / MVP Pro and Xhorse MINI OBD Tool (FT-OBD) for this car; 5 of them list all keys lost. Check your tool's latest coverage list before the job.