Skip to content

Toyota MR2 2003 Key Fob & Car Keys

Keys that fit the 2000–2005 Toyota MR2: transponder keys, 4C chip. 4 compatible keys, remotes & shells (genuine and aftermarket) available for the 2003 Toyota MR2.

Last updated: 15 November 2026

Key specifications for the Toyota MR2 2000–2005

Key types
transponder keys, key shells, emergency blades and key blanks
Transponder chip
4C
Blade profile
TOY38R

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Toyota parts catalogue, with the specifications on each listing.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Toyota MR2 2003 key

Key with a blade (regular or flip)

3 tools list this key. 3 of them list all keys lost.

  • Launch X-431 IMMO
    • Add key
    • All keys lost
    • Remote
    • Add key
    • All keys lost
    • Remote
  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote

Key type not stated by the list

One tool lists this key.

Without a tool

The remote is programmed on the car, without a tool.

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: Every remote to be programmed, A key that fits the ignition

  1. Start with the key out, the driver's door open and unlocked, and every other door closed.
  2. Within 5 seconds, insert the key without turning it and pull it out, two times.
  3. Within 40 seconds, close and open the driver's door twice, then insert the key and pull it out once.
  4. Within the next 40 seconds, close and open the driver's door twice, insert the key and leave it in, then close the driver's door.
  5. Turn the ignition to ON without starting, back to OFF, and remove the key.
  6. Within 3 seconds the locks lock and unlock by themselves: the car is in programming mode. If they do not, start again from step 1.
  7. Within 40 seconds, hold LOCK and UNLOCK together on the remote for 1.5 seconds.
  8. Right after releasing them, hold LOCK alone for 2 seconds.
  9. Within 3 seconds the locks lock and unlock once: the remote is accepted. Two cycles mean it was not accepted, repeat steps 7 and 8.
  10. Repeat steps 7 to 9 for each extra remote.
  11. Open the driver's door to end programming.
Watch out: Keep each time window: 5 seconds, then 40 seconds, then 40 seconds; the remote step also has 40 seconds.

When the key changed

Key with a blade (regular or flip)

  • 1999 - 2007This yearChip: 4CMR2 Spyder / MR-S (W30) transponder key

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Toyota MR2 2000–2005?

4 listings fit the Toyota MR2 2000–2005: transponder keys, key shells, emergency blades and key blanks. Match the part number or FCC ID printed on your original key with the specifications on each listing.

Which transponder chip does the Toyota MR2 2000–2005 key use?

The listings for this car carry: 4C. Check the chip in each listing's specifications.

Which blade profile does the Toyota MR2 2000–2005 key use?

The blades listed for this car: TOY38R.

Which tools program a Toyota MR2 2000–2005 key?

The tool makers' coverage lists name Launch X-431 IMMO, Lonsdor K518, OBDSTAR Key Master G3 and Autel IM608 II / IM608 Pro II for this car; 4 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Toyota MR2 2000–2005 remote be programmed without a tool?

The remote is programmed on the car, without a tool.