Toyota Prado 2011 Key Fob & Car Keys
Keys that fit the 2010–2011 Toyota Prado: smart keys, flip keys and remote keys, 2, 3 or 4 buttons, FCC ID 12BBY or B41TA, 8A+4D or 4D-67 chip, 433 MHz. 26 compatible keys, remotes & shells (genuine and aftermarket) available for the 2011 Toyota Prado.
Last updated: 17 November 2026
Key specifications for the Toyota Prado 2010–2011
- Key types
- smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks
- Frequency
- 433 MHz
- Buttons
- 2-, 3- and 4-button
- Transponder chip
- 8A+4D · 4D-67 · 4D-72 (G)
- Blade profile
- TOY43 · TOY48
- Part numbers
- 89070-60790 · 89070-60C91 · 89904-60752
- Battery
- CR2016
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Toyota parts catalogue, with the specifications on each listing. Every remote listed for the Toyota Prado 2010–2011 transmits on 433 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $3.65In Stock
- $4.18In Stock
- Toyota Land Cruiser Prado 2010-2015 Modified Flip Key Shell Type 1, 3-button with TOY43 Blade
SKU: B05651
$3.37In Stock - Toyota Land Cruiser Prado 2010-2015 Modified Flip Key Shell Type 2, 3-button with TOY43 Blade
SKU: B06542
$3.65In Stock - $3.37In Stock
- $1.40In Stock
Programming the Toyota Prado 2011 key
Smart key (push to start)
5 tools list this key. 5 of them list all keys lost.
- Advanced Diagnostics Smart Pro
- Add key
- All keys lost
- Remote
online calculationNeeds: AD ADC2000 cable, AD ADC2000B cable - Add key(non-US cars)
- All keys lost(non-US cars)
- Add key
- All keys lost(non-US cars)
- Add key
- All keys lost
- Universal key
- Add key
- All keys lost
- Universal key
Programming steps
Add key - Autel MaxiIM IM508 / IM608(GCC / Europe cars)
Needs: working smart key, new smart key for the car, internet connection (if the tool asks for the data backup)
- Connect the VCI to OBD. IMMO > Toyota > select the model > Smart key > Keyless system (CAN).
- If the tool asks for it, run Back up IMMO data first (online) and save the file.
- Add smart key: switch the ignition on with the working key, follow the prompts (ignition off, hazard lights on where asked).
- Hold the working key to the Start button until one beep, then the new key until two beeps.
- Switch on, touch a learned key to the Start button, then test start and the remote buttons.
Add key - Lonsdor K518ISE / K518S / K518 Pro(GCC / Europe cars)
Needs: working smart key, new smart key for the car
- Connect the K518 by OBD. Immobilizer > Toyota > Select from type > (smart key system) > Add smart key.
- Hold the working key to the Start button and press it until the dashboard lights flash.
- Within 30 s hold the new key to the Start button; remove it after two beeps.
- Wait for registration complete, then test start and the remote buttons.
All keys lost - Autel MaxiIM IM508 / IM608(GCC / Europe cars)
Needs: APB112 smart key simulator, XP400 (IM508), new smart key for the car (OEM or Xhorse / Autel universal), internet connection, no PIN entry (data read by OBD)
- Connect the VCI to OBD (and the APB112 to the tablet). IMMO > Toyota > select the model > Smart key > Keyless system (CAN).
- Back up IMMO data (online): the tool reads the smart box EEPROM by OBD; save the file.
- Generate simulator key: load the saved file, confirm the key type, connect the APB112 and let it be written.
- Hold the APB112 against the Start button and press Start: the dashboard comes on.
- Add smart key: say yes to using the simulator; hold the APB112 to the Start button until one beep, then the new key until two beeps.
- Wait for Registering to finish, then test start and the remote buttons of the new key.
- If the customer wants the lost keys gone, delete the keys not present with the tool's key erase function.
All keys lost - Lonsdor K518ISE / K518S / K518 Pro(GCC / Europe cars)
Needs: LKE 5-in-1 smart key emulator (older SKE emulators per chip type), new smart key for the car, no PIN entry (data read by OBD)
- Bind the LKE emulator to the K518 the first time you use it.
- Connect by OBD. Immobilizer > Toyota > Select from type > All smart key lost > Backup EEPROM (immo data) and save the file.
- Generate the emergency key: put the LKE in the K518 card slot and write it from the saved data.
- Hold the LKE to the Start button and press Start until the dashboard comes on.
- Add smart key: LKE (registered key) to the Start button until one beep, then within 30 s the new key until two beeps.
- Test start and remote; delete lost keys with Delete smart key if the customer wants them gone.
Key with a blade (regular or flip)
2 tools list this key. 1 of them list all keys lost.
- Add key
- All keys lost
- Add key(non-US cars)
All keys lost is listed by Lonsdor K518. Autel IM608 II / IM608 Pro II lists add key only.
Programming steps
Add key - Autel MaxiIM IM508 / IM608(GCC / Europe cars)
Needs: working master key, new key cut to the car with the same chip family (4D, G or H / 8A)
- Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
- Connect the VCI to the OBD port. IMMO > Toyota > select the model and year > Blade key > Immobilizer, then the key learning function.
- Insert the working master key and switch the ignition on when asked.
- Remove it, insert the new cut key and leave the ignition off (if learning fails, run it again with the ignition on).
- Wait for the security light to go out: the key is learned. Check it switches on and starts.
- Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons.
Add key - Lonsdor K518ISE / K518S / K518 Pro(GCC / Europe cars)
Needs: working master key, new key cut to the car with the same chip family (4D, G or H / 8A)
- Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
- Connect the K518 by OBD. Immobilizer > Toyota > select the model and year (or the 4D-G type menu) > Mechanical key > Add key.
- Insert the master key and switch the ignition on.
- When asked, insert the new cut key and switch the ignition on and off as the tool prompts.
- Wait until the tool reports the key programmed, then test that it starts.
- Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons.
All keys lost - Lonsdor K518ISE / K518S / K518 Pro(GCC / Europe cars)
Needs: new keys cut to the car with blank 4D-67/68 or G chips, Lonsdor chip written as Toyota G (optional, G cars), no PIN entry (the tool resets by OBD)
- Cut the new keys first. For a G car the chip must be a Toyota G (80-bit); a Lonsdor blank can be written as Toyota G in the K518 (Generate key chip) before you start.
- Connect the K518 by OBD. Immobilizer > Toyota > select the model and year > Mechanical key (4D or G type) > Reset immobilizer (all keys lost).
- Follow the ignition prompts (off, on, off and remove the key, on again) while the tool resets and configures the immobilizer.
- Within 120 s register the keys: insert a master key, switch on and wait 5 s; repeat for each further key; with only one or two keys, finish by switching the ignition on and off quickly 5 times.
- The security light goes out when programming is done. Test every key.
- Add further keys later with the normal add-key routine and one of the new masters.
- Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons. Remotes not learned in this step stop working.
Key type not stated by the list
One tool lists this key.
- Add key
- All keys lost
- Remote
- Universal key
When the key changed
Smart key (push to start)
- 2010 - 2017This yearChip: DST80433 MHz(GCC / Europe cars)
- from 2018Chip: 8A433 MHz(GCC / Europe cars)250 series (2024 on) keys differ from 150 series keys
- from 2024Chip: 8A315 MHzFCC: HYQ14FBX(US / Canada cars)Sold in the US as Land Cruiser (250 series)
Key with a blade (regular or flip)
- 2005 - 2009Chip: 4D-67Blade: TOY43(GCC / Europe cars)
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Toyota Prado 2010–2011?
26 listings fit the Toyota Prado 2010–2011: smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 2-, 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Toyota Prado 2010–2011 remote use?
Every remote listed for the Toyota Prado 2010–2011 transmits on 433 MHz.
Which transponder chip does the Toyota Prado 2010–2011 key use?
The listings for this car carry: 8A+4D · 4D-67 · 4D-72 (G). Check the chip in each listing's specifications.
Which FCC IDs do Toyota Prado 2010–2011 remotes carry?
The remotes listed for this car carry FCC ID 12BBY and B41TA. Match it with the FCC ID printed on your original remote.
Which blade profile does the Toyota Prado 2010–2011 key use?
The blades listed for this car: TOY43 · TOY48.
Which tools program a Toyota Prado 2010–2011 key?
The tool makers' coverage lists name Advanced Diagnostics Smart Pro, Autel IM608 II / IM608 Pro II, Lonsdor K518, Xhorse VVDI Key Tool Max, Xhorse VVDI Key Tool Plus and Xhorse MINI OBD Tool (FT-OBD) for this car; 6 of them list all keys lost. Check your tool's latest coverage list before the job.

























