Skip to content

Toyota Prado 2022 Key Fob & Car Keys

Keys that fit the 2022 Toyota Prado: smart keys, 2, 3 or 4 buttons, 8A+4D or 8A (H-chip) chip, 433 MHz. 8 compatible keys, remotes & shells (genuine and aftermarket) available for the 2022 Toyota Prado.

Last updated: 15 November 2026

Key specifications for the Toyota Prado 2022

Key types
smart keys, key shells and emergency blades
Frequency
433 MHz
Buttons
2-, 3- and 4-button
Transponder chip
8A+4D · 8A (H-chip)
Blade profile
TOY48
Part numbers
89904-60V60 / 89904-60V30

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Toyota parts catalogue, with the specifications on each listing. Every remote listed for the Toyota Prado 2022 transmits on 433 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Toyota Prado 2022 key

Smart key (push to start)

4 tools list this key. 4 of them list all keys lost.

Programming steps

Add key - Lonsdor K518ISE / K518S / K518 Pro(GCC / Europe cars)

Needs: working smart key, Lonsdor Super ADP 8A/4A adapter when the OBD backup fails, new smart key, internet connection

  1. Immo & Remote > Toyota > Select from type > All smart key lost (2016-) > 8A or 4A > Backup immo data, by OBD or with the ADP adapter on the smart box; save the data.
  2. Add smart key: switch on with the working key, then ignition off and hazards on when asked; load the saved data.
  3. Working key to the Start button until one beep, then within 30 s the new key until two beeps.
  4. Switch on, touch a programmed key to the Start button, then test start and remote.
Watch out: Bring every key the customer keeps; check the remote buttons on each after programming. The smart box has 5 key positions in the worked examples; erase unused keys if it is full.
All keys lost - Lonsdor K518ISE / K518S / K518 Pro(GCC / Europe cars)

Needs: LKE emulator (K518ISE / K518S), Lonsdor Super ADP 8A/4A adapter when the OBD backup fails, new smart key (OEM or Lonsdor FT key), internet connection, no PIN from the dealer (the 12-digit code is derived from the backup)

  1. Bind the LKE emulator to the K518ISE / K518S (the K518 Pro generates the emergency key without an LKE).
  2. Immo & Remote > Toyota > Select from type > All smart key lost (2016-) > 8A or 4A > Backup immo data. Try by OBD first; if it fails, connect the ADP adapter between the smart box and its harness.
  3. Turn the hazard lights on when asked, enter the VIN if asked, let the tool calculate online and save the data.
  4. Refit the smart box plug, connect by OBD, put the LKE in the card slot and generate the emergency key from the saved data.
  5. Add smart key: switch on with the LKE at the Start button, then ignition off and hazards on when asked; load the saved data.
  6. Registered key (LKE) to the Start button until one beep, then within 30 s the new key until two beeps.
  7. Switch on and touch a programmed key to the Start button (one beep), then test start and remote.
  8. Delete lost keys with Delete smart key if the customer wants them gone.
Watch out: The car battery must be charged; the data backup needs an internet connection. The simulator / emulator is erased if you use the device for another key job before adding the key: add the new key straight after generating it. The smart box has 5 key positions in the worked examples; erase unused keys if it is full. The ADP adapter is bound to one K518 for good.

Key with a blade (regular or flip)

2 tools list this key. None of the lists names all keys lost for this year.

Programming steps

Add key - Autel MaxiIM IM508 / IM608(GCC / Europe cars)

Needs: working master key, new key cut to the car with the same chip family (4D, G or H / 8A)

  1. Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
  2. Connect the VCI to the OBD port. IMMO > Toyota > select the model and year > Blade key > Immobilizer, then the key learning function.
  3. Insert the working master key and switch the ignition on when asked.
  4. Remove it, insert the new cut key and leave the ignition off (if learning fails, run it again with the ignition on).
  5. Wait for the security light to go out: the key is learned. Check it switches on and starts.
  6. Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons.
Watch out: A valet key cannot add keys: you need a master key. Use the chip family the car already has: a 4D key will not learn on a G car, a G key not on an H car.
Add key - Lonsdor K518ISE / K518S / K518 Pro(GCC / Europe cars)

Needs: working master key, new key cut to the car with the same chip family (4D, G or H / 8A)

  1. Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
  2. Connect the K518 by OBD. Immobilizer > Toyota > select the model and year (or the 4D-G type menu) > Mechanical key > Add key.
  3. Insert the master key and switch the ignition on.
  4. When asked, insert the new cut key and switch the ignition on and off as the tool prompts.
  5. Wait until the tool reports the key programmed, then test that it starts.
  6. Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons.
Watch out: A valet key cannot add keys: you need a master key. Use the chip family the car already has: a 4D key will not learn on a G car, a G key not on an H car.

Remote

3 tools list this key.

Key type not stated by the list

One tool lists this key.

When the key changed

Smart key (push to start)

  • 2010 - 2017Chip: DST80433 MHz(GCC / Europe cars)
  • from 2018This yearChip: 8A433 MHz(GCC / Europe cars)250 series (2024 on) keys differ from 150 series keys
  • from 2024Chip: 8A315 MHzFCC: HYQ14FBX(US / Canada cars)Sold in the US as Land Cruiser (250 series)

Key with a blade (regular or flip)

  • 2005 - 2009Chip: 4D-67Blade: TOY43(GCC / Europe cars)

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Toyota Prado 2022?

8 listings fit the Toyota Prado 2022: smart keys, key shells and emergency blades, in 2-, 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Toyota Prado 2022 remote use?

Every remote listed for the Toyota Prado 2022 transmits on 433 MHz.

Which transponder chip does the Toyota Prado 2022 key use?

The listings for this car carry: 8A+4D · 8A (H-chip). Check the chip in each listing's specifications.

Which blade profile does the Toyota Prado 2022 key use?

The blades listed for this car: TOY48.

Which tools program a Toyota Prado 2022 key?

The tool makers' coverage lists name Advanced Diagnostics Smart Pro, Lonsdor K518, Xhorse VVDI Key Tool Max, Xhorse VVDI Key Tool Plus, Autel IM608 II / IM608 Pro II and Lonsdor KH100 for this car; 4 of them list all keys lost. Check your tool's latest coverage list before the job.