Toyota Solara 2008 Key Fob & Car Keys
4 compatible keys, remotes & shells (genuine and aftermarket) available for the 2008 Toyota Solara.
Last updated: 12 November 2026
Key specifications for the Toyota Solara 2007–2008
- Key types
- key blanks
- Transponder chip
- 4D-60
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Toyota parts catalogue, with the specifications on each listing.
Shells and blades reuse the original electronics, and a blade needs cutting by a locksmith. We ship worldwide from the UAE by DHL and FedEx.
Programming the Toyota Solara 2008 key
Key with a blade (regular or flip)
4 tools list this key. 4 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
- Remote
- Add key(US / Canada cars)
- All keys lost(US / Canada cars)
- Launch X-431 IMMO
- Add key
- All keys lost
Programming steps
Add key - Autel MaxiIM IM508 / IM608(US / Canada cars)
Needs: working master key, new key cut to the car with the same chip family (4D, G or H / 8A)
- Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
- Connect the VCI to the OBD port. IMMO > Toyota > select the model and year > Blade key > Immobilizer, then the key learning function.
- Insert the working master key and switch the ignition on when asked.
- Remove it, insert the new cut key and leave the ignition off (if learning fails, run it again with the ignition on).
- Wait for the security light to go out: the key is learned. Check it switches on and starts.
- Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons.
All keys lost - Autel MaxiIM IM508 / IM608(US / Canada cars)
Needs: new keys cut to the car with blank 4D-67/68 or G chips, no PIN entry (the tool resets by OBD)
- Cut the new keys first, with the chip family of the car (4D-67/68 or G).
- Connect the VCI to the OBD port. IMMO > Toyota > select the model and year > Blade key > Immobilizer > All keys lost (immobilizer reset).
- Answer how many keys you will register and keep the driver door open during learning.
- Follow the ignition prompts (off, on, off and remove the key, on again) while the tool resets the immobilizer.
- Within 120 s register the keys: insert a master key, switch on and wait 5 s; repeat for each further key; with only one or two keys, finish by switching the ignition on and off quickly 5 times.
- The security light goes out when programming is done. Test every key.
- Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons.
Key type not stated by the list
2 tools list this key. 2 of them list all keys lost.
- Add key
- All keys lost
- Remote
- Universal key
- Add key
- All keys lost
Without a tool
The remote is programmed on the car, without a tool.
Programming steps
Program the remote without a tool(US / Canada cars)
Needs: Every remote to be programmed, A key that fits the ignition
- Start with the key out, the driver's door open and unlocked, and every other door closed.
- Within 5 seconds, insert the key without turning it and pull it out, two times.
- Within 40 seconds, close and open the driver's door twice, then insert the key and pull it out once.
- Within the next 40 seconds, close and open the driver's door twice, insert the key and leave it in, then close the driver's door.
- Turn the ignition to ON without starting, back to OFF, and remove the key.
- Within 3 seconds the locks lock and unlock by themselves: the car is in programming mode. If they do not, start again from step 1.
- Within 40 seconds, hold LOCK and UNLOCK together on the remote for 1.5 seconds.
- Right after releasing them, hold LOCK alone for 2 seconds.
- Within 3 seconds the locks lock and unlock once: the remote is accepted. Two cycles mean it was not accepted, repeat steps 7 and 8.
- Repeat steps 7 to 9 for each extra remote.
- Open the driver's door to end programming.
When the key changed
Key with a blade (regular or flip)
- 1999 - 2003Chip: 4CBlade: TOY43(US / Canada cars)
- 2004 - 2009This yearChip: 4D-67Blade: TOY43(US / Canada cars)
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Toyota Solara 2007–2008?
4 listings fit the Toyota Solara 2007–2008: key blanks. Match the part number or FCC ID printed on your original key with the specifications on each listing.
Which transponder chip does the Toyota Solara 2007–2008 key use?
The listings for this car carry: 4D-60. Check the chip in each listing's specifications.
Which tools program a Toyota Solara 2007–2008 key?
The tool makers' coverage lists name OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Autel IM608 II / IM608 Pro II, Launch X-431 IMMO and Xhorse MINI OBD Tool (FT-OBD) for this car; 5 of them list all keys lost. Check your tool's latest coverage list before the job.
Can the Toyota Solara 2007–2008 remote be programmed without a tool?
The remote is programmed on the car, without a tool.



