Skip to content

Toyota Tundra 2004–2006 Key Fob & Car Keys

Keys that fit the 2004–2006 Toyota Tundra: smart keys and remote keys, 2 buttons, 4D-67 chip. 2 compatible keys, remotes & shells (genuine and aftermarket) available for the 2004 Toyota Tundra.

Last updated: 7 November 2026

Key specifications for the Toyota Tundra 2004–2006

Key types
smart keys, remote keys and key shells
Buttons
2-button
Transponder chip
4D-67

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Toyota parts catalogue, with the specifications on each listing.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Toyota Tundra 2004 key

Key with a blade (regular or flip)

5 tools list this key. 1 of them list all keys lost.

  • Launch X-431 IMMO
    • Add key
    • All keys lost
    • Remote
    • Remote
  • Lonsdor KH100
    • Remote
  • OBDSTAR Key Master G3
    • Remote
  • XTOOL X100 PAD3 / X100 MAX
    • Remote

Key type not stated by the list

2 tools list this key. 2 of them list all keys lost.

Without a tool

The remote is programmed on the car, without a tool.

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: Main procedure, Every remote to be programmed, A key that fits the ignition

  1. Start with the key out, the driver's door open and unlocked, and every other door closed.
  2. Within 5 seconds, insert the key without turning it and pull it out, two times.
  3. Within 40 seconds, close and open the driver's door twice, then insert the key and pull it out once.
  4. Within the next 40 seconds, close and open the driver's door twice, insert the key and leave it in, then close the driver's door.
  5. Turn the ignition to ON without starting, back to OFF, and remove the key.
  6. Within 3 seconds the locks lock and unlock by themselves: the car is in programming mode. If they do not, start again from step 1.
  7. Within 40 seconds, hold LOCK and UNLOCK together on the remote for 1.5 seconds.
  8. Right after releasing them, hold LOCK alone for 2 seconds.
  9. Within 3 seconds the locks lock and unlock once: the remote is accepted. Two cycles mean it was not accepted, repeat steps 7 and 8.
  10. Repeat steps 7 to 9 for each extra remote.
  11. Open the driver's door to end programming.
Watch out: Keep each time window: 5 seconds, then 40 seconds, then 40 seconds; the remote step also has 40 seconds.
Program the remote without a tool(US / Canada cars)

Needs: Alternative procedure, if the main one does not work, Every remote to be programmed, A key that fits the ignition

  1. Start with the key out, the driver's door open and unlocked, and every other door closed.
  2. Insert the key without turning it and pull it out.
  3. Within 40 seconds, work the driver's power lock switch 5 times LOCK then UNLOCK, starting with LOCK, about one cycle per second, then close and open the driver's door.
  4. Within the next 40 seconds, do 5 more LOCK / UNLOCK cycles at the same pace, then insert the key in the ignition.
  5. Turn the ignition to ON without starting, back to OFF once, and remove the key.
  6. Within 3 seconds the locks cycle by themselves: the car is in programming mode. If they do not, start again from step 1.
  7. Within 40 seconds, hold LOCK and UNLOCK together on the remote for 1 second.
  8. Right after releasing them, hold LOCK alone for 2 seconds.
  9. Within 3 seconds the locks cycle once: the remote is accepted. No cycle or two cycles mean it was not accepted, repeat steps 7 and 8.
  10. Repeat steps 7 to 9 for each extra remote.
  11. Close the driver's door to end programming.
Watch out: Each block of steps 3 and 4 and the remote step must be done within 40 seconds.

When the key changed

Smart key (push to start)

  • 2019 - 2021Chip: 8A315 MHzFCC: HYQ14FBA, HYQ14FBB(US / Canada cars)Push-start trims only (Platinum, 1794, some Limited)
  • 2022 - 2026Chip: 8A315 MHzFCC: HYQ14FBX(US / Canada cars)Page BA key (board 3041), all trims

Key with a blade (regular or flip)

  • 2005 - 2009Chip: 4D-67Blade: TOY43(US / Canada cars)Chip from the 2005 facelift; 2000-2004 trucks have no immobilizer
  • 2010 - 2015Chip: GBlade: TOY43(US / Canada cars)2010-2011 can be 4D-67 or G; read the key, G is stamped on the blade
  • 2016 - 2021Chip: H (8A)315 MHzBlade: TOY43FCC: GQ4-52T(US / Canada cars)Remote head key from 2017; 2016-2017 can still be G

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Toyota Tundra 2004–2006?

2 listings fit the Toyota Tundra 2004–2006: smart keys, remote keys and key shells, in 2-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

Which transponder chip does the Toyota Tundra 2004–2006 key use?

The listings for this car carry: 4D-67. Check the chip in each listing's specifications.

Which tools program a Toyota Tundra 2004–2006 key?

The tool makers' coverage lists name Launch X-431 IMMO, Lonsdor K518, Lonsdor KH100, OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX and Xhorse MINI OBD Tool (FT-OBD) for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Toyota Tundra 2004–2006 remote be programmed without a tool?

The remote is programmed on the car, without a tool.