Skip to content

Toyota Vellfire 2010 Key Fob & Car Keys

Keys that fit the 2008–2013 Toyota Vellfire: smart keys, 4 or 5 buttons, FCC ID 14AAM11 or B52EA, 4D chip, 312 MHz. 6 compatible keys, remotes & shells (genuine and aftermarket) available for the 2010 Toyota Vellfire.

Last updated: 11 November 2026

Key specifications for the Toyota Vellfire 2008–2013

Key types
smart keys, key shells and emergency blades
Frequency
312 MHz
Buttons
4- and 5-button
Transponder chip
4D
Blade profile
TOY48
Battery
CR1632
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Toyota parts catalogue, with the specifications on each listing. Every remote listed for the Toyota Vellfire 2008–2013 transmits on 312 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Toyota Vellfire 2010 key

Smart key (push to start)

5 tools list this key. 3 of them list all keys lost.

All keys lost is listed by OBDSTAR Key Master G3, Xhorse VVDI Key Tool Max and Xhorse VVDI Key Tool Plus. Autel IM608 II / IM608 Pro II and Lonsdor K518 list add key only.

Programming steps

Add key - Autel MaxiIM IM508 / IM608(GCC / Europe cars)

Needs: working smart key, new smart key for the car, internet connection (if the tool asks for the data backup)

  1. Connect the VCI to OBD. IMMO > Toyota > select the model > Smart key > Keyless system (CAN).
  2. If the tool asks for it, run Back up IMMO data first (online) and save the file.
  3. Add smart key: switch the ignition on with the working key, follow the prompts (ignition off, hazard lights on where asked).
  4. Hold the working key to the Start button until one beep, then the new key until two beeps.
  5. Switch on, touch a learned key to the Start button, then test start and the remote buttons.
Watch out: Bring every key the customer keeps; check the remote buttons on each after programming. The smart box has 5 key positions in the worked examples; erase unused keys if it is full.
Add key - Lonsdor K518ISE / K518S / K518 Pro(GCC / Europe cars)

Needs: working smart key, new smart key for the car

  1. Connect the K518 by OBD. Immobilizer > Toyota > Select from type > (smart key system) > Add smart key.
  2. Hold the working key to the Start button and press it until the dashboard lights flash.
  3. Within 30 s hold the new key to the Start button; remove it after two beeps.
  4. Wait for registration complete, then test start and the remote buttons.
Watch out: Bring every key the customer keeps; check the remote buttons on each after programming. The smart box has 5 key positions in the worked examples; erase unused keys if it is full.

Key with a blade (regular or flip)

2 tools list this key. 2 of them list all keys lost.

  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
  • Launch X-431 IMMO
    • Add key
    • All keys lost

Key type not stated by the list

One tool lists this key.

When the key changed

Smart key (push to start)

  • 2008 - 2014This yearChip: 4D(GCC / Europe cars)20 series, page 94 smart key; shared with the Alphard
  • 2015 - 2022Chip: 8A(GCC / Europe cars)30 series; shared with the Alphard
  • from 2023Chip: 8A(GCC / Europe cars)40 series, BA type key (board 3041)

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Toyota Vellfire 2008–2013?

6 listings fit the Toyota Vellfire 2008–2013: smart keys, key shells and emergency blades, in 4- and 5-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Toyota Vellfire 2008–2013 remote use?

Every remote listed for the Toyota Vellfire 2008–2013 transmits on 312 MHz.

Which transponder chip does the Toyota Vellfire 2008–2013 key use?

The listings for this car carry: 4D. Check the chip in each listing's specifications.

Which FCC IDs do Toyota Vellfire 2008–2013 remotes carry?

The remotes listed for this car carry FCC ID 14AAM11 and B52EA. Match it with the FCC ID printed on your original remote.

Which blade profile does the Toyota Vellfire 2008–2013 key use?

The blades listed for this car: TOY48.

Which tools program a Toyota Vellfire 2008–2013 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, Xhorse VVDI Key Tool Max, Xhorse VVDI Key Tool Plus, Autel IM608 II / IM608 Pro II, Lonsdor K518 and XTOOL X100 PAD3 / X100 MAX for this car; 4 of them list all keys lost. Check your tool's latest coverage list before the job.