Skip to content

Toyota Venza 2016 Key Fob & Car Keys

Keys that fit the 2016 Toyota Venza: smart keys and flip keys, 2 or 3 buttons, FCC ID GQ429T, HYQ12BBY or HYQ12BDC. 14 compatible keys, remotes & shells (genuine and aftermarket) available for the 2016 Toyota Venza.

Last updated: 17 November 2026

Key specifications for the Toyota Venza 2016

Key types
smart keys, flip keys, key shells and emergency blades
Buttons
2- and 3-button
Blade profile
TOY48 · TOY43

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Toyota parts catalogue, with the specifications on each listing.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Toyota Venza 2016 key

Smart key (push to start)

3 tools list this key. 2 of them list all keys lost.

All keys lost is listed by Autel IM608 II / IM608 Pro II and XTOOL X100 PAD3 / X100 MAX. Lonsdor K518 lists add key only.

Programming steps

Add key - Autel MaxiIM IM508 / IM608(US / Canada cars)

Needs: working smart key, new smart key for the car, internet connection (if the tool asks for the data backup)

  1. Connect the VCI to OBD. IMMO > Toyota > select the model > Smart key > Keyless system (CAN).
  2. If the tool asks for it, run Back up IMMO data first (online) and save the file.
  3. Add smart key: switch the ignition on with the working key, follow the prompts (ignition off, hazard lights on where asked).
  4. Hold the working key to the Start button until one beep, then the new key until two beeps.
  5. Switch on, touch a learned key to the Start button, then test start and the remote buttons.
Watch out: Bring every key the customer keeps; check the remote buttons on each after programming. The smart box has 5 key positions in the worked examples; erase unused keys if it is full.
All keys lost - Autel MaxiIM IM508 / IM608(US / Canada cars)

Needs: APB112 smart key simulator, XP400 (IM508), new smart key for the car (OEM or Xhorse / Autel universal), internet connection, no PIN entry (data read by OBD)

  1. Connect the VCI to OBD (and the APB112 to the tablet). IMMO > Toyota > select the model > Smart key > Keyless system (CAN).
  2. Back up IMMO data (online): the tool reads the smart box EEPROM by OBD; save the file.
  3. Generate simulator key: load the saved file, confirm the key type, connect the APB112 and let it be written.
  4. Hold the APB112 against the Start button and press Start: the dashboard comes on.
  5. Add smart key: say yes to using the simulator; hold the APB112 to the Start button until one beep, then the new key until two beeps.
  6. Wait for Registering to finish, then test start and the remote buttons of the new key.
  7. If the customer wants the lost keys gone, delete the keys not present with the tool's key erase function.
Watch out: The car battery must be charged; the data backup needs an internet connection. The simulator / emulator is erased if you use the device for another key job before adding the key: add the new key straight after generating it. The smart box has 5 key positions in the worked examples; erase unused keys if it is full.

Key with a blade (regular or flip)

5 tools list this key. 3 of them list all keys lost.

  • Launch X-431 IMMO
    • Add key
    • All keys lost
    • Remote
    • Add key
    • All keys lost
    • Remote
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    • Add key(US / Canada cars)
  • OBDSTAR Key Master G3
    • Remote

All keys lost is listed by Launch X-431 IMMO, Lonsdor K518 and XTOOL X100 PAD3 / X100 MAX. Autel IM608 II / IM608 Pro II lists add key only.

Programming steps

Add key - Autel MaxiIM IM508 / IM608(US / Canada cars)

Needs: working master key, new key cut to the car with the same chip family (4D, G or H / 8A)

  1. Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
  2. Connect the VCI to the OBD port. IMMO > Toyota > select the model and year > Blade key > Immobilizer, then the key learning function.
  3. Insert the working master key and switch the ignition on when asked.
  4. Remove it, insert the new cut key and leave the ignition off (if learning fails, run it again with the ignition on).
  5. Wait for the security light to go out: the key is learned. Check it switches on and starts.
  6. Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons.
Watch out: A valet key cannot add keys: you need a master key. Use the chip family the car already has: a 4D key will not learn on a G car, a G key not on an H car.

Key type not stated by the list

One tool lists this key.

When the key changed

Smart key (push to start)

  • 2009 - 2016This yearChip: DST80315 MHzFCC: HYQ14ACX(US / Canada cars)Page 98 key (board 5290), push-start trims
  • 2021 - 2024Chip: 8A315 MHzFCC: HYQ14FBX(US / Canada cars)Page BA key (board 3041), hybrid only

Key with a blade (regular or flip)

  • 2009 - 2010Chip: 4D-67315 MHzBlade: TOY43FCC: GQ4-29T(US / Canada cars)Dot-chip remote head key; 2010-2011 crossover, read the chip
  • 2011 - 2016This yearChip: G315 MHzBlade: TOY43FCC: GQ4-29T(US / Canada cars)G stamped on the blade; 2010-2011 crossover, read the chip

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Toyota Venza 2016?

14 listings fit the Toyota Venza 2016: smart keys, flip keys, key shells and emergency blades, in 2- and 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

Which FCC IDs do Toyota Venza 2016 remotes carry?

The remotes listed for this car carry FCC ID GQ429T, HYQ12BBY, HYQ12BDC, HYQ14ACX and M0ZB41TG. Match it with the FCC ID printed on your original remote.

Which blade profile does the Toyota Venza 2016 key use?

The blades listed for this car: TOY48 · TOY43.

Which tools program a Toyota Venza 2016 key?

The tool makers' coverage lists name Autel IM608 II / IM608 Pro II, XTOOL X100 PAD3 / X100 MAX, Lonsdor K518, Launch X-431 IMMO, OBDSTAR Key Master G3 and Xhorse MINI OBD Tool (FT-OBD) for this car; 5 of them list all keys lost. Check your tool's latest coverage list before the job.