Skip to content

Toyota Vios 2015 Key Fob & Car Keys

Keys that fit the 2014–2017 Toyota Vios: smart keys, remote keys and transponder keys, 2 or 3 buttons, FCC ID BF2EK or WAZSKE13D02, 4D-72 (G) or 8A (H-chip) chip, 433 MHz. 10 compatible keys, remotes & shells (genuine and aftermarket) available for the 2015 Toyota Vios.

Last updated: 11 November 2026

Key specifications for the Toyota Vios 2014–2017

Key types
smart keys, remote keys, transponder keys, key shells, emergency blades and key blanks
Frequency
433 MHz
Buttons
2- and 3-button
Transponder chip
4D-72 (G) · 8A (H-chip)
Blade profile
TOY43
Part numbers
69515-52180
Battery
CR2032
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Toyota parts catalogue, with the specifications on each listing. Every remote listed for the Toyota Vios 2014–2017 transmits on 433 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Toyota Vios 2015 key

Smart key (push to start)

6 tools list this key. 5 of them list all keys lost.

All keys lost is listed by OBDSTAR Key Master G3, Lonsdor K518, Xhorse VVDI Key Tool Max, Xhorse VVDI Key Tool Plus and XTOOL X100 PAD3 / X100 MAX. Autel IM608 II / IM608 Pro II lists add key only.

Programming steps

Add key - Autel MaxiIM IM508 / IM608(GCC / Europe cars)

Needs: working smart key, new smart key for the car, internet connection (if the tool asks for the data backup)

  1. Connect the VCI to OBD. IMMO > Toyota > select the model > Smart key > Keyless system (CAN).
  2. If the tool asks for it, run Back up IMMO data first (online) and save the file.
  3. Add smart key: switch the ignition on with the working key, follow the prompts (ignition off, hazard lights on where asked).
  4. Hold the working key to the Start button until one beep, then the new key until two beeps.
  5. Switch on, touch a learned key to the Start button, then test start and the remote buttons.
Watch out: Bring every key the customer keeps; check the remote buttons on each after programming. The smart box has 5 key positions in the worked examples; erase unused keys if it is full.
Add key - Lonsdor K518ISE / K518S / K518 Pro(GCC / Europe cars)

Needs: working smart key, new smart key for the car

  1. Connect the K518 by OBD. Immobilizer > Toyota > Select from type > (smart key system) > Add smart key.
  2. Hold the working key to the Start button and press it until the dashboard lights flash.
  3. Within 30 s hold the new key to the Start button; remove it after two beeps.
  4. Wait for registration complete, then test start and the remote buttons.
Watch out: Bring every key the customer keeps; check the remote buttons on each after programming. The smart box has 5 key positions in the worked examples; erase unused keys if it is full.
All keys lost - Lonsdor K518ISE / K518S / K518 Pro(GCC / Europe cars)

Needs: LKE 5-in-1 smart key emulator (older SKE emulators per chip type), new smart key for the car, no PIN entry (data read by OBD)

  1. Bind the LKE emulator to the K518 the first time you use it.
  2. Connect by OBD. Immobilizer > Toyota > Select from type > All smart key lost > Backup EEPROM (immo data) and save the file.
  3. Generate the emergency key: put the LKE in the K518 card slot and write it from the saved data.
  4. Hold the LKE to the Start button and press Start until the dashboard comes on.
  5. Add smart key: LKE (registered key) to the Start button until one beep, then within 30 s the new key until two beeps.
  6. Test start and remote; delete lost keys with Delete smart key if the customer wants them gone.
Watch out: The car battery must be charged; the data backup needs an internet connection. The simulator / emulator is erased if you use the device for another key job before adding the key: add the new key straight after generating it. The smart box has 5 key positions in the worked examples; erase unused keys if it is full.

Key with a blade (regular or flip)

7 tools list this key. 6 of them list all keys lost.

Key type not stated by the list

One tool lists this key.

When the key changed

Smart key (push to start)

  • 2014 - 2017This yearChip: 8A(GCC / Europe cars)Push-start trims; same smart key as the Yaris 2014-2017

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Toyota Vios 2014–2017?

10 listings fit the Toyota Vios 2014–2017: smart keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 2- and 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Toyota Vios 2014–2017 remote use?

Every remote listed for the Toyota Vios 2014–2017 transmits on 433 MHz.

Which transponder chip does the Toyota Vios 2014–2017 key use?

The listings for this car carry: 4D-72 (G) · 8A (H-chip). Check the chip in each listing's specifications.

Which FCC IDs do Toyota Vios 2014–2017 remotes carry?

The remotes listed for this car carry FCC ID BF2EK and WAZSKE13D02. Match it with the FCC ID printed on your original remote.

Which blade profile does the Toyota Vios 2014–2017 key use?

The blades listed for this car: TOY43.

Which tools program a Toyota Vios 2014–2017 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, Lonsdor K518, Xhorse VVDI Key Tool Max, Xhorse VVDI Key Tool Plus, XTOOL X100 PAD3 / X100 MAX and Autel IM608 II / IM608 Pro II for this car; 5 of them list all keys lost. Check your tool's latest coverage list before the job.