Skip to content

Vauxhall Corsa 2011 Key Fob & Car Keys

Keys that fit the 2010–2013 Vauxhall Corsa: flip keys, remote keys and transponder keys, 2 or 3 buttons, ID46 (HITAG 2) chip, 433 MHz. 4 compatible keys, remotes & shells (genuine and aftermarket) available for the 2011 Vauxhall Corsa.

Last updated: 29 October 2026

Key specifications for the Vauxhall Corsa 2010–2013

Key types
flip keys, remote keys, transponder keys, key shells and emergency blades
Frequency
433 MHz
Buttons
2- and 3-button
Transponder chip
ID46 (HITAG 2)
Blade profile
HU100

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Vauxhall parts catalogue, with the specifications on each listing. Every remote listed for the Vauxhall Corsa 2010–2013 transmits on 433 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Vauxhall Corsa 2011 key

Key with a blade (regular or flip)

Programming steps

Add key - OBD key programmer with the Opel / Vauxhall Corsa D BCM menu (Smart Pro, OBDSTAR, Lonsdor K518) or Opcom with the Car Pass code(GCC / Europe cars)

Needs: working key, new ID46 (PCF7941) remote key cut to the car (HU100), 4-digit security code from the Car Pass, or PIN read by OBD, every key the customer keeps

  1. Connect the tool at the OBD port in the lower centre console.
  2. Open Opel / Vauxhall, Corsa D, body control module (BCM), immobiliser programming.
  3. Enter the 4-digit security code from the Car Pass, or let the tool read it from the BCM by OBD.
  4. Start transponder key programming, insert the new key and switch the ignition on when asked; the remote pairs in the same routine.
  5. Switch the ignition off and on again, then clear the fault codes.
  6. Test start, lock and unlock with the new key and with every old key.
Watch out: Use a key with a genuine PCF7941 chip: PCF7946 clone remotes do not learn to the Corsa D BCM. Have every key the customer keeps at hand and test each one after the session.

Without a tool

The owner's manual describes a resync on the car after a battery change; adding a remote needs a tool.

Programming steps

Program the remote without a tool(GCC / Europe cars)

Needs: the remote key itself (already coded to the car)

  1. Unlock the driver's door with the key blade in the door lock.
  2. Switch the ignition on: the remote synchronises.
  3. Switch off and test lock and unlock with the remote.
Watch out: This only synchronises a remote already coded to the car, after a battery change or many presses out of range. A new or replacement key is programmed with a tool through the BCM.

When the key changed

Key with a blade (regular or flip)

  • 2000 - 2006Chip: ID40433 MHz(GCC / Europe cars)Corsa C (Opel Corsa C) remote head key or transponder key
  • 2006 - 2014This yearChip: ID46433 MHzBlade: HU100(GCC / Europe cars)Corsa D remote or flip key; PCF7941 keys only, PCF7946 clones fail

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Vauxhall Corsa 2010–2013?

4 listings fit the Vauxhall Corsa 2010–2013: flip keys, remote keys, transponder keys, key shells and emergency blades, in 2- and 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Vauxhall Corsa 2010–2013 remote use?

Every remote listed for the Vauxhall Corsa 2010–2013 transmits on 433 MHz.

Which transponder chip does the Vauxhall Corsa 2010–2013 key use?

The listings for this car carry: ID46 (HITAG 2). Check the chip in each listing's specifications.

Which blade profile does the Vauxhall Corsa 2010–2013 key use?

The blades listed for this car: HU100.

Can the Vauxhall Corsa 2010–2013 remote be programmed without a tool?

The owner's manual describes a resync on the car after a battery change; adding a remote needs a tool.