Skip to content

Volkswagen Bora 1999 Key Fob & Car Keys

Keys that fit the 1999 Volkswagen Bora: flip keys and remote keys, 2 buttons. 3 compatible keys, remotes & shells (genuine and aftermarket) available for the 1999 Volkswagen Bora.

Last updated: 10 November 2026

Key specifications for the Volkswagen Bora 1999

Key types
flip keys, remote keys, key shells, emergency blades and key blanks
Buttons
2-button

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Volkswagen parts catalogue, with the specifications on each listing.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Volkswagen Bora 1999 key

Key with a blade (regular or flip)

7 tools list this key. None of the lists names all keys lost for this year.

Programming steps

Add key - Xhorse VVDI2 (VAG, K-line cluster immobilizer 2 / 3 key learn)(GCC / Europe cars)

Needs: working key, new ID48 transponder key (blank, or already matched to this car), battery support unit

  1. Switch the ignition on, connect by OBD and read the PIN from the instrument cluster (K-line instrument / immobox menu); note it.
  2. Check the immobilizer lock time: if it is not zero, leave the ignition on until it runs out.
  3. Open Key Learn for the car's K-line immobilizer and log in with the PIN.
  4. Enter the total number of keys to match, old and new: the old key list is cleared.
  5. Switch the ignition off, insert the next key and switch on; wait until the immobilizer light goes out (about 2 seconds).
  6. Repeat for every key, keeping the other keys away from the ignition, and finish all keys within about 60 seconds.
  7. Test start with every key.
Watch out: Every key the customer keeps must be matched in the same session: the count you enter replaces the old key list. If the cluster does not give the PIN by OBD, read its EEPROM on the bench to get it. Up to 8 keys can be matched.

Key type not stated by the list

2 tools list this key. 2 of them list all keys lost.

  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
  • Launch X-431 IMMO
    • All keys lost
    all keys lost on the bench

When the key changed

Key with a blade (regular or flip)

  • 1998 - 2005This yearChip: ID48Blade: HU66(GCC / Europe cars)Bora (1J), immobiliser 2 then 3 in the cluster

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Volkswagen Bora 1999?

3 listings fit the Volkswagen Bora 1999: flip keys, remote keys, key shells, emergency blades and key blanks, in 2-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

Which tools program a Volkswagen Bora 1999 key?

The tool makers' coverage lists name Xhorse VVDI2, Lonsdor K518, Lonsdor KH100, OBDSTAR Key Master G3, OBDSTAR X300 Mini (VW) and Xhorse VVDI Key Tool Max for this car; 0 of them list all keys lost. Check your tool's latest coverage list before the job.