Skip to content

Volkswagen CC 2015 Key Fob & Car Keys

1 compatible key, remote & shell (genuine and aftermarket) available for the 2015 Volkswagen CC.

Last updated: 10 November 2026

Key specifications for the Volkswagen CC 2015

Key types
emergency blades and key blanks
Blade profile
HU66

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Volkswagen parts catalogue, with the specifications on each listing.

Shells and blades reuse the original electronics, and a blade needs cutting by a locksmith. We ship worldwide from the UAE by DHL and FedEx.

Programming the Volkswagen CC 2015 key

Smart key (push to start)

3 tools list this key. 3 of them list all keys lost.

  • Xhorse VVDI2
    • Add key
    • All keys lost
  • OBDSTAR Key Master G3
    • All keys lost
    • Remote
    reads the PIN by OBD
  • OBDSTAR X300 Mini (VW)
    • All keys lost
    • Remote
    reads the PIN by OBD

Programming steps

Add key - Xhorse VVDI2 (VAG, Passat B6/B7/CC Key Learn)

Needs: working key, blank key with the car's transponder type (ID48 TP23-type or ID46 PCF7936)

  1. Switch the ignition on with the working key, connect by OBD and open Key Learn, 4th immobilizer system, VW Passat B6/B7/CC Key Learn.
  2. Read the vehicle information, then let the tool read the PIN and the first 6 bytes of CS from the engine ECU by OBD (Auto Detect PIN/CS).
  3. Check the transponder type: an ID46 (Hitag2) car needs only the 6 bytes; an ID48 car also needs the 7th CS byte, taken from the working key or from the comfort module 95320 dump.
  4. Put the blank key in the programmer and make the dealer key.
  5. Enter the total number of keys and press Learn; switch the ignition off for 5 seconds and on again with each key in turn when the tool asks.
  6. Test start and remote with every key.
Watch out: Every key the customer keeps must be learned in the same session. If the immobilizer refuses the login, leave the ignition on and wait out the security delay before trying again; repeated wrong logins keep it locked.
All keys lost - Xhorse VVDI2 (VAG, Passat B6/B7/CC Key Learn, OBD)

Needs: blank keys: one ID48 and one ID46 to find the transponder type, battery support unit

  1. Switch on the hazard lights and press the brake a few times to wake the car, connect by OBD and open VW Passat B6/B7/CC Key Learn.
  2. Read the PIN and the first 6 bytes of CS from the engine ECU by OBD, or from the comfort module 95320 dump read on the bench.
  3. Find the transponder type: put an ID48 blank and then an ID46 blank in the ignition slot and see which one the tool reports as the right type.
  4. ID46 car: set the 7th CS byte to FF, make the dealer key and learn it the same way as an added key.
  5. ID48 car: use the all-keys-lost try-start method; start the count at 0, write down the count if a try fails and continue from it next time.
  6. Learn every key the customer keeps and test start and remote.
Watch out: All keys lost by OBD changes component security bytes in the immobilizer: keys ordered from the dealer later need an online adaptation at the dealer. Keep the voltage stable during key adaptation; VW asks for 12.5 to 14.5 V.

Key with a blade (regular or flip)

2 tools list this key. 2 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
  • OBDSTAR X300 Mini (VW)
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD

Key type not stated by the list

One tool lists this key.

  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    PIN read function · all keys lost on the bench

When the key changed

Smart key (push to start)

  • 2009 - 2015This yearChip: ID48433 MHz(GCC / Europe cars)Passat CC slot key; some cars use ID46 (Hitag2), test the key
  • 2009 - 2015This yearChip: ID48315 MHzFCC: NBG009066T(US / Canada cars)CC slot key, push-button start; some cars use ID46 (Hitag2), test the key

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Volkswagen CC 2015?

1 listing fit the Volkswagen CC 2015: emergency blades and key blanks. Match the part number or FCC ID printed on your original key with the specifications on each listing.

Which blade profile does the Volkswagen CC 2015 key use?

The blades listed for this car: HU66.

Which tools program a Volkswagen CC 2015 key?

The tool makers' coverage lists name Xhorse VVDI2, OBDSTAR Key Master G3, OBDSTAR X300 Mini (VW) and XTOOL X100 PAD3 / X100 MAX for this car; 4 of them list all keys lost. Check your tool's latest coverage list before the job.