Skip to content

Volkswagen Golf 2012 Key Fob & Car Keys

Keys that fit the 2012 Volkswagen Golf: flip keys and remote keys, 3 buttons. 7 compatible keys, remotes & shells (genuine and aftermarket) available for the 2012 Volkswagen Golf.

Last updated: 16 November 2026

Key specifications for the Volkswagen Golf 2012

Key types
flip keys, remote keys, key shells, emergency blades and key blanks
Buttons
3-button
Blade profile
HU66
Part numbers
5K0 837 202 S

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Volkswagen parts catalogue, with the specifications on each listing.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Volkswagen Golf 2012 key

Smart key (push to start)

3 tools list this key.

Key with a blade (regular or flip)

9 tools list this key. 5 of them list all keys lost.

All keys lost is listed by OBDSTAR Key Master G3, OBDSTAR X300 Mini (VW), Xhorse VVDI2, Autel IM508S and Autel IM608 II / IM608 Pro II. Lonsdor K518 lists add key only.

Programming steps

Add key - Xhorse VVDI2 (VAG)

Needs: working key, blank VW remote key with Megamos 48 transponder

  1. Switch the ignition on with the working key and connect by OBD; let the tool detect the 4th immobilizer cluster type.
  2. Read the immo data from the cluster and save the file.
  3. Choose Make Dealer Key and put the blank key in the programmer.
  4. Choose Add Key, enter the number of keys to learn and learn each key in the ignition when told (or learn with the saved immo data).
  5. Reset the instrument cluster, then test start and remote with every key.
Watch out: The key learn registers the number of keys you enter: have every key present, or the ones not learned stop working. Back up the immo data before any write.
All keys lost - Autel MaxiIM IM608 / IM508S + XP400 Pro (dump)

Needs: APA102 / APA103 clip, blank VW remote key, battery support

  1. Remove the cluster; let the tool detect the cluster type (for example VDO NEC+24C64) and choose All keys lost (via dump).
  2. Back up the ABS coding when asked.
  3. Clip the XP400 Pro onto the cluster EEPROM, read it and let the tool write the modified data.
  4. Refit the cluster, switch the ignition on and write the original EEPROM back by OBD (this takes a while).
  5. Read the immo data, then make the dealer key in the XP400 Pro.
  6. Run key learning for every key, recover the ABS coding and test start and remote.
Watch out: Do not skip the ABS coding backup and restore. All keys the customer keeps must be learned in the same session.
All keys lost - Xhorse VVDI2 (VAG) + EEPROM programmer

Needs: blank VW remote key, EEPROM programmer for the cluster chip (24C32 / 24C64), battery support

  1. Switch on the hazard lights and press the brake a few times to open OBD communication; back up the ABS coding.
  2. Remove the cluster, read its 24C32 / 24C64 EEPROM with the programmer and save the original file.
  3. Let VVDI2 make the service EEPROM file and write it to the cluster chip.
  4. Refit the cluster, select the correct login type, load the original EEPROM file and write it to the cluster by OBD.
  5. Read the immo data and save it.
  6. Make the new dealer key, add it to the immobilizer and reset the instrument; then test start.
Watch out: Writing the original EEPROM back by OBD is required: skipping it leaves the cluster in service mode. Some cluster types (NEC+95320, Johnson Controls, Magneti Marelli 9S12, VDO NEC 2009+) can do all keys lost by OBD with the PIN and CS read from the engine ECU instead.

Key type not stated by the list

One tool lists this key.

  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    PIN read function

When the key changed

Key with a blade (regular or flip)

  • 1998 - 2003Chip: ID48Blade: HU66Golf 4 (Mk4)
  • 2004 - 2008Chip: ID48Blade: HU66Golf 5 (Mk5)
  • 2009 - 2012This yearChip: ID48Blade: HU66Golf 6 (Mk6), immobiliser 4
  • 2013 - 2020Chip: Megamos AES433 MHz(GCC / Europe cars)Golf 7 (MQB)
  • 2018 - 2021Chip: Hitag Pro315 MHzFCC: NBGFS125C1(US / Canada cars)Golf 7 US cars, MQB49 key
  • from 2020Chip: Hitag Pro433 MHz(GCC / Europe cars)Golf 8 (MQB Evo), MQB49 key

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Volkswagen Golf 2012?

7 listings fit the Volkswagen Golf 2012: flip keys, remote keys, key shells, emergency blades and key blanks, in 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

Which blade profile does the Volkswagen Golf 2012 key use?

The blades listed for this car: HU66.

Which tools program a Volkswagen Golf 2012 key?

The tool makers' coverage lists name Autel KM100 (IKEY universal smart key), Xhorse VVDI Key Tool Max, Xhorse VVDI Key Tool Plus, OBDSTAR Key Master G3, OBDSTAR X300 Mini (VW) and Xhorse VVDI2 for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.