Skip to content

Volkswagen Golf 2013 Key Fob & Car Keys

Keys that fit the 2013 Volkswagen Golf: flip keys and remote keys, 3 buttons. 9 compatible keys, remotes & shells (genuine and aftermarket) available for the 2013 Volkswagen Golf.

Last updated: 16 November 2026

Key specifications for the Volkswagen Golf 2013

Key types
flip keys, remote keys, key shells, emergency blades and key blanks
Buttons
3-button
Blade profile
HU66
Part numbers
5G6 959 752 S / 5G6 959 752 DJ · 5G6 959 752 DJ

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Volkswagen parts catalogue, with the specifications on each listing.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Volkswagen Golf 2013 key

Smart key (push to start)

6 tools list this key. 2 of them list all keys lost.

All keys lost is listed by OBDSTAR Key Master G3 and OBDSTAR X300 Mini (VW). Advanced Diagnostics Smart Pro lists add key only.

Key with a blade (regular or flip)

9 tools list this key. 5 of them list all keys lost.

All keys lost is listed by OBDSTAR Key Master G3, OBDSTAR X300 Mini (VW), Autel IM508S, Autel IM608 II / IM608 Pro II and Xhorse VVDI2. Lonsdor K518 and Xhorse VVDI Key Tool Plus list add key only.

Programming steps

Add key - Autel MaxiIM IM608 / IM508S + XP400 Pro

Needs: working key, blank MQB remote key (original or aftermarket MQB), internet connection

  1. Connect by OBD with the tablet online and the XP400 Pro on USB; open IMMO, Volkswagen, Advanced mode, MQB, Key learning.
  2. Switch the ignition on with the working key and let the tool read the immo data; save it.
  3. Answer yes to make a dealer key and put the blank key in the XP400 Pro key slot.
  4. Go on to key adaptation, enter the total number of keys and switch the ignition on with each key in turn when told.
  5. Test start and remote with every key.
Watch out: Every key the customer keeps must be adapted in the same session. Newer MQB clusters may refuse an OBD read and need the cluster read on the bench.
Add key - Xhorse VVDI2 (VAG)

Needs: working key, blank VW remote key with Megamos 48 transponder

  1. Switch the ignition on with the working key and connect by OBD; let the tool detect the 4th immobilizer cluster type.
  2. Read the immo data from the cluster and save the file.
  3. Choose Make Dealer Key and put the blank key in the programmer.
  4. Choose Add Key, enter the number of keys to learn and learn each key in the ignition when told (or learn with the saved immo data).
  5. Reset the instrument cluster, then test start and remote with every key.
Watch out: The key learn registers the number of keys you enter: have every key present, or the ones not learned stop working. Back up the immo data before any write.
Add key - Xhorse VVDI2 / Key Tool Plus (VAG)

Needs: working key, blank MQB key, internet connection

  1. Connect by OBD and read the cluster EEPROM data where the tool asks; save it.
  2. Read the immo data and save it.
  3. Make the dealer key in the programmer.
  4. Reset the instrument cluster.
  5. Add the key: enter the key count and switch the ignition on with each key in turn.
  6. Reset the cluster again and test start and remote.
Watch out: Program every key the customer keeps in one session. Some Johnson Controls MQB clusters could not be read by VVDI2 by OBD (field reports); check the cluster type first.
All keys lost - Autel MaxiIM IM608 / IM508S + XP400 Pro

Needs: blank MQB remote key (original or aftermarket; Autel says Xhorse MQB remotes failed), internet connection, pay-per-use credit

  1. Connect by OBD with the tablet online; open IMMO, Volkswagen, Advanced mode, MQB, All keys lost.
  2. Insert a blank key (or press START on a Kessy car) and read the immo data; the function is paid per use.
  3. Wait for the online calculation to finish.
  4. Make the dealer key with the blank in the XP400 Pro slot; repeat for each extra key.
  5. Run key adaptation: enter the number of keys and switch the ignition on for about 2 seconds with each key.
  6. Test start and remote with every key.
Watch out: All-keys-lost by OBD on MQB changes the immobilizer data: keys ordered from the dealer afterwards may need dealer online adaptation. Autel's OBD all keys lost covers VW / Audi MQB blade-key cars; Skoda and Seat MQB were not supported at the time.
All keys lost - Autel MaxiIM IM608 / IM508S + XP400 Pro (dump)

Needs: APA102 / APA103 clip, blank VW remote key, battery support

  1. Remove the cluster; let the tool detect the cluster type (for example VDO NEC+24C64) and choose All keys lost (via dump).
  2. Back up the ABS coding when asked.
  3. Clip the XP400 Pro onto the cluster EEPROM, read it and let the tool write the modified data.
  4. Refit the cluster, switch the ignition on and write the original EEPROM back by OBD (this takes a while).
  5. Read the immo data, then make the dealer key in the XP400 Pro.
  6. Run key learning for every key, recover the ABS coding and test start and remote.
Watch out: Do not skip the ABS coding backup and restore. All keys the customer keeps must be learned in the same session.
All keys lost - Xhorse VVDI2 (VAG) + EEPROM programmer

Needs: blank VW remote key, EEPROM programmer for the cluster chip (24C32 / 24C64), battery support

  1. Switch on the hazard lights and press the brake a few times to open OBD communication; back up the ABS coding.
  2. Remove the cluster, read its 24C32 / 24C64 EEPROM with the programmer and save the original file.
  3. Let VVDI2 make the service EEPROM file and write it to the cluster chip.
  4. Refit the cluster, select the correct login type, load the original EEPROM file and write it to the cluster by OBD.
  5. Read the immo data and save it.
  6. Make the new dealer key, add it to the immobilizer and reset the instrument; then test start.
Watch out: Writing the original EEPROM back by OBD is required: skipping it leaves the cluster in service mode. Some cluster types (NEC+95320, Johnson Controls, Magneti Marelli 9S12, VDO NEC 2009+) can do all keys lost by OBD with the PIN and CS read from the engine ECU instead.

Key type not stated by the list

One tool lists this key.

  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    PIN read function

When the key changed

Key with a blade (regular or flip)

  • 1998 - 2003Chip: ID48Blade: HU66Golf 4 (Mk4)
  • 2004 - 2008Chip: ID48Blade: HU66Golf 5 (Mk5)
  • 2009 - 2012Chip: ID48Blade: HU66Golf 6 (Mk6), immobiliser 4
  • 2013 - 2020This yearChip: Megamos AES433 MHz(GCC / Europe cars)Golf 7 (MQB)
  • 2018 - 2021Chip: Hitag Pro315 MHzFCC: NBGFS125C1(US / Canada cars)Golf 7 US cars, MQB49 key
  • from 2020Chip: Hitag Pro433 MHz(GCC / Europe cars)Golf 8 (MQB Evo), MQB49 key

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Volkswagen Golf 2013?

9 listings fit the Volkswagen Golf 2013: flip keys, remote keys, key shells, emergency blades and key blanks, in 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

Which blade profile does the Volkswagen Golf 2013 key use?

The blades listed for this car: HU66.

Which tools program a Volkswagen Golf 2013 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, OBDSTAR X300 Mini (VW), Advanced Diagnostics Smart Pro, Autel KM100 (IKEY universal smart key), Xhorse VVDI Key Tool Max and Xhorse VVDI Key Tool Plus for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.