Skip to content

Volkswagen Golf 2014 Key Fob & Car Keys

Keys that fit the 2014 Volkswagen Golf: smart keys, flip keys and remote keys, 3 buttons, MQB48 (Megamos AES) chip, 433 MHz. 10 compatible keys, remotes & shells (genuine and aftermarket) available for the 2014 Volkswagen Golf.

Last updated: 16 November 2026

Key specifications for the Volkswagen Golf 2014

Key types
smart keys, flip keys, remote keys, key shells, emergency blades and key blanks
Frequency
433 MHz
Buttons
3-button
Transponder chip
MQB48 (Megamos AES)
Blade profile
HU66 · HU162T
Part numbers
5G6 959 752 S / 5G6 959 752 DJ · 5G6 959 752 DJ · 5G6 959 752 CJ

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Volkswagen parts catalogue, with the specifications on each listing. Every remote listed for the Volkswagen Golf 2014 transmits on 433 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Volkswagen Golf 2014 key

Smart key (push to start)

6 tools list this key. 2 of them list all keys lost.

All keys lost is listed by OBDSTAR Key Master G3 and OBDSTAR X300 Mini (VW). Advanced Diagnostics Smart Pro lists add key only.

Key with a blade (regular or flip)

9 tools list this key. 4 of them list all keys lost.

All keys lost is listed by OBDSTAR Key Master G3, OBDSTAR X300 Mini (VW), Autel IM508S and Autel IM608 II / IM608 Pro II. Lonsdor K518, Xhorse VVDI Key Tool Plus and Xhorse VVDI2 list add key only.

Programming steps

Add key - Autel MaxiIM IM608 / IM508S + XP400 Pro

Needs: working key, blank MQB remote key (original or aftermarket MQB), internet connection

  1. Connect by OBD with the tablet online and the XP400 Pro on USB; open IMMO, Volkswagen, Advanced mode, MQB, Key learning.
  2. Switch the ignition on with the working key and let the tool read the immo data; save it.
  3. Answer yes to make a dealer key and put the blank key in the XP400 Pro key slot.
  4. Go on to key adaptation, enter the total number of keys and switch the ignition on with each key in turn when told.
  5. Test start and remote with every key.
Watch out: Every key the customer keeps must be adapted in the same session. Newer MQB clusters may refuse an OBD read and need the cluster read on the bench.
Add key - Xhorse VVDI2 / Key Tool Plus (VAG)

Needs: working key, blank MQB key, internet connection

  1. Connect by OBD and read the cluster EEPROM data where the tool asks; save it.
  2. Read the immo data and save it.
  3. Make the dealer key in the programmer.
  4. Reset the instrument cluster.
  5. Add the key: enter the key count and switch the ignition on with each key in turn.
  6. Reset the cluster again and test start and remote.
Watch out: Program every key the customer keeps in one session. Some Johnson Controls MQB clusters could not be read by VVDI2 by OBD (field reports); check the cluster type first.
All keys lost - Autel MaxiIM IM608 / IM508S + XP400 Pro

Needs: blank MQB remote key (original or aftermarket; Autel says Xhorse MQB remotes failed), internet connection, pay-per-use credit

  1. Connect by OBD with the tablet online; open IMMO, Volkswagen, Advanced mode, MQB, All keys lost.
  2. Insert a blank key (or press START on a Kessy car) and read the immo data; the function is paid per use.
  3. Wait for the online calculation to finish.
  4. Make the dealer key with the blank in the XP400 Pro slot; repeat for each extra key.
  5. Run key adaptation: enter the number of keys and switch the ignition on for about 2 seconds with each key.
  6. Test start and remote with every key.
Watch out: All-keys-lost by OBD on MQB changes the immobilizer data: keys ordered from the dealer afterwards may need dealer online adaptation. Autel's OBD all keys lost covers VW / Audi MQB blade-key cars; Skoda and Seat MQB were not supported at the time.

Key type not stated by the list

One tool lists this key.

  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    PIN read function

When the key changed

Key with a blade (regular or flip)

  • 1998 - 2003Chip: ID48Blade: HU66Golf 4 (Mk4)
  • 2004 - 2008Chip: ID48Blade: HU66Golf 5 (Mk5)
  • 2009 - 2012Chip: ID48Blade: HU66Golf 6 (Mk6), immobiliser 4
  • 2013 - 2020This yearChip: Megamos AES433 MHz(GCC / Europe cars)Golf 7 (MQB)
  • 2018 - 2021Chip: Hitag Pro315 MHzFCC: NBGFS125C1(US / Canada cars)Golf 7 US cars, MQB49 key
  • from 2020Chip: Hitag Pro433 MHz(GCC / Europe cars)Golf 8 (MQB Evo), MQB49 key

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Volkswagen Golf 2014?

10 listings fit the Volkswagen Golf 2014: smart keys, flip keys, remote keys, key shells, emergency blades and key blanks, in 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Volkswagen Golf 2014 remote use?

Every remote listed for the Volkswagen Golf 2014 transmits on 433 MHz.

Which transponder chip does the Volkswagen Golf 2014 key use?

The listings for this car carry: MQB48 (Megamos AES). Check the chip in each listing's specifications.

Which blade profile does the Volkswagen Golf 2014 key use?

The blades listed for this car: HU66 · HU162T.

Which tools program a Volkswagen Golf 2014 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, OBDSTAR X300 Mini (VW), Advanced Diagnostics Smart Pro, Autel KM100 (IKEY universal smart key), Xhorse VVDI Key Tool Max and Xhorse VVDI Key Tool Plus for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.