Skip to content

Volkswagen Passat 2013 Key Fob & Car Keys

Keys that fit the 2013 Volkswagen Passat: flip keys and remote keys, 3 or 4 buttons, FCC ID NBG010180T, ID46 (HITAG 2) chip, 434 MHz. 4 compatible keys, remotes & shells (genuine and aftermarket) available for the 2013 Volkswagen Passat.

Last updated: 10 November 2026

Key specifications for the Volkswagen Passat 2013

Key types
flip keys, remote keys, key shells, emergency blades and key blanks
Frequency
434 MHz
Buttons
3- and 4-button
Transponder chip
ID46 (HITAG 2)
Blade profile
HU66
Part numbers
5K0 837 202 AE · 3C0 959 752 BG
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Volkswagen parts catalogue, with the specifications on each listing. Every remote listed for the Volkswagen Passat 2013 transmits on 434 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Volkswagen Passat 2013 key

Smart key (push to start)

2 tools list this key. 1 of them list all keys lost.

Programming steps

Add key - Xhorse VVDI2 (VAG, Passat B6/B7/CC Key Learn)(GCC / Europe cars)

Needs: working key, blank key with the car's transponder type (ID48 TP23-type or ID46 PCF7936)

  1. Switch the ignition on with the working key, connect by OBD and open Key Learn, 4th immobilizer system, VW Passat B6/B7/CC Key Learn.
  2. Read the vehicle information, then let the tool read the PIN and the first 6 bytes of CS from the engine ECU by OBD (Auto Detect PIN/CS).
  3. Check the transponder type: an ID46 (Hitag2) car needs only the 6 bytes; an ID48 car also needs the 7th CS byte, taken from the working key or from the comfort module 95320 dump.
  4. Put the blank key in the programmer and make the dealer key.
  5. Enter the total number of keys and press Learn; switch the ignition off for 5 seconds and on again with each key in turn when the tool asks.
  6. Test start and remote with every key.
Watch out: Every key the customer keeps must be learned in the same session. If the immobilizer refuses the login, leave the ignition on and wait out the security delay before trying again; repeated wrong logins keep it locked.
All keys lost - Xhorse VVDI2 (VAG, Passat B6/B7/CC Key Learn, OBD)(GCC / Europe cars)

Needs: blank keys: one ID48 and one ID46 to find the transponder type, battery support unit

  1. Switch on the hazard lights and press the brake a few times to wake the car, connect by OBD and open VW Passat B6/B7/CC Key Learn.
  2. Read the PIN and the first 6 bytes of CS from the engine ECU by OBD, or from the comfort module 95320 dump read on the bench.
  3. Find the transponder type: put an ID48 blank and then an ID46 blank in the ignition slot and see which one the tool reports as the right type.
  4. ID46 car: set the 7th CS byte to FF, make the dealer key and learn it the same way as an added key.
  5. ID48 car: use the all-keys-lost try-start method; start the count at 0, write down the count if a try fails and continue from it next time.
  6. Learn every key the customer keeps and test start and remote.
Watch out: All keys lost by OBD changes component security bytes in the immobilizer: keys ordered from the dealer later need an online adaptation at the dealer. Keep the voltage stable during key adaptation; VW asks for 12.5 to 14.5 V.

Key with a blade (regular or flip)

7 tools list this key. 3 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
  • OBDSTAR X300 Mini (VW)
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
  • Xhorse VVDI2
    • Add key(US / Canada cars)
    • All keys lost(US / Canada cars)
    • Add key
    • Remote
  • Lonsdor KH100
    • Remote
    • Universal key
    • Universal key

All keys lost is listed by OBDSTAR Key Master G3, OBDSTAR X300 Mini (VW) and Xhorse VVDI2. Lonsdor K518 lists add key only.

Programming steps

Add key - Xhorse VVDI2 (VAG)(US / Canada cars)

Needs: working key, blank VW remote key with Megamos 48 transponder

  1. Switch the ignition on with the working key and connect by OBD; let the tool detect the 4th immobilizer cluster type.
  2. Read the immo data from the cluster and save the file.
  3. Choose Make Dealer Key and put the blank key in the programmer.
  4. Choose Add Key, enter the number of keys to learn and learn each key in the ignition when told (or learn with the saved immo data).
  5. Reset the instrument cluster, then test start and remote with every key.
Watch out: The key learn registers the number of keys you enter: have every key present, or the ones not learned stop working. Back up the immo data before any write.
All keys lost - Xhorse VVDI2 (VAG) + EEPROM programmer(US / Canada cars)

Needs: blank VW remote key, EEPROM programmer for the cluster chip (24C32 / 24C64), battery support

  1. Switch on the hazard lights and press the brake a few times to open OBD communication; back up the ABS coding.
  2. Remove the cluster, read its 24C32 / 24C64 EEPROM with the programmer and save the original file.
  3. Let VVDI2 make the service EEPROM file and write it to the cluster chip.
  4. Refit the cluster, select the correct login type, load the original EEPROM file and write it to the cluster by OBD.
  5. Read the immo data and save it.
  6. Make the new dealer key, add it to the immobilizer and reset the instrument; then test start.
Watch out: Writing the original EEPROM back by OBD is required: skipping it leaves the cluster in service mode. Some cluster types (NEC+95320, Johnson Controls, Magneti Marelli 9S12, VDO NEC 2009+) can do all keys lost by OBD with the PIN and CS read from the engine ECU instead.

Key type not stated by the list

2 tools list this key. 2 of them list all keys lost.

  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    PIN read function
  • Launch X-431 IMMO
    • All keys lost
    all keys lost on the bench

When the key changed

Smart key (push to start)

  • 2006 - 2010Chip: ID48B6 slot key; some cars use ID46 (Hitag2), test the key
  • 2011 - 2014This yearChip: ID48(GCC / Europe cars)B7 slot key (Europe / GCC); some cars use ID46

Key with a blade (regular or flip)

  • 1995 - 1997Chip: ID33Blade: HU66(GCC / Europe cars)B4, immobiliser 1
  • 1997 - 1999Chip: ID13Blade: HU66(GCC / Europe cars)B5 early cars
  • 2000 - 2005Chip: ID48Blade: HU66B5 / B5.5, immobiliser 3
  • 2012 - 2016This yearChip: ID48315 MHzBlade: HU66FCC: NBG010180T(US / Canada cars)NMS (US built) flip key, immobiliser 4 cluster
  • 2015 - 2021Chip: Megamos AES(GCC / Europe cars)B8 (MQB), MQB48 key; keyless versions too
  • 2017 - 2022Chip: Megamos AES315 MHzBlade: HU66FCC: NBGFS93N(US / Canada cars)NMS facelift flip key, MQB-type chip; read the original key

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Volkswagen Passat 2013?

4 listings fit the Volkswagen Passat 2013: flip keys, remote keys, key shells, emergency blades and key blanks, in 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Volkswagen Passat 2013 remote use?

Every remote listed for the Volkswagen Passat 2013 transmits on 434 MHz.

Which transponder chip does the Volkswagen Passat 2013 key use?

The listings for this car carry: ID46 (HITAG 2). Check the chip in each listing's specifications.

Which FCC IDs do Volkswagen Passat 2013 remotes carry?

The remotes listed for this car carry FCC ID NBG010180T. Match it with the FCC ID printed on your original remote.

Which blade profile does the Volkswagen Passat 2013 key use?

The blades listed for this car: HU66.

Which tools program a Volkswagen Passat 2013 key?

The tool makers' coverage lists name Xhorse VVDI2, Autel KM100 (IKEY universal smart key), OBDSTAR Key Master G3, OBDSTAR X300 Mini (VW), Lonsdor K518 and Lonsdor KH100 for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.