Skip to content

Volkswagen Passat 2017 Key Fob & Car Keys

Keys that fit the 2017 Volkswagen Passat: smart keys, flip keys and remote keys, 3 buttons, FCC ID NBGFS93N, MQB48 (Megamos AES) chip, 315 MHz. 2 compatible keys, remotes & shells (genuine and aftermarket) available for the 2017 Volkswagen Passat.

Last updated: 10 November 2026

Key specifications for the Volkswagen Passat 2017

Key types
smart keys, flip keys, remote keys and key shells
Frequency
315 MHz
Buttons
3-button
Transponder chip
MQB48 (Megamos AES)
Blade profile
HU66
Part numbers
5K0 837 202 BJ
Battery
CR2032
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Volkswagen parts catalogue, with the specifications on each listing. Every remote listed for the Volkswagen Passat 2017 transmits on 315 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Volkswagen Passat 2017 key

Smart key (push to start)

6 tools list this key. 2 of them list all keys lost.

All keys lost is listed by OBDSTAR Key Master G3 and OBDSTAR X300 Mini (VW). Advanced Diagnostics Smart Pro lists add key only.

Key with a blade (regular or flip)

9 tools list this key. 2 of them list all keys lost.

All keys lost is listed by OBDSTAR Key Master G3 and OBDSTAR X300 Mini (VW). Lonsdor K518, Autel IM508S, Autel IM608 II / IM608 Pro II, Xhorse VVDI Key Tool Plus and Xhorse VVDI2 list add key only.

Programming steps

Add key - Autel MaxiIM IM608 / IM508S + XP400 Pro(GCC / Europe cars)

Needs: working key, blank MQB remote key (original or aftermarket MQB), internet connection

  1. Connect by OBD with the tablet online and the XP400 Pro on USB; open IMMO, Volkswagen, Advanced mode, MQB, Key learning.
  2. Switch the ignition on with the working key and let the tool read the immo data; save it.
  3. Answer yes to make a dealer key and put the blank key in the XP400 Pro key slot.
  4. Go on to key adaptation, enter the total number of keys and switch the ignition on with each key in turn when told.
  5. Test start and remote with every key.
Watch out: Every key the customer keeps must be adapted in the same session. Newer MQB clusters may refuse an OBD read and need the cluster read on the bench.
Add key - Xhorse VVDI2 / Key Tool Plus (VAG)(GCC / Europe cars)

Needs: working key, blank MQB key, internet connection

  1. Connect by OBD and read the cluster EEPROM data where the tool asks; save it.
  2. Read the immo data and save it.
  3. Make the dealer key in the programmer.
  4. Reset the instrument cluster.
  5. Add the key: enter the key count and switch the ignition on with each key in turn.
  6. Reset the cluster again and test start and remote.
Watch out: Program every key the customer keeps in one session. Some Johnson Controls MQB clusters could not be read by VVDI2 by OBD (field reports); check the cluster type first.

Key type not stated by the list

2 tools list this key. 2 of them list all keys lost.

  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
  • Launch X-431 IMMO
    • All keys lost
    all keys lost on the bench

When the key changed

Smart key (push to start)

  • 2006 - 2010Chip: ID48B6 slot key; some cars use ID46 (Hitag2), test the key
  • 2011 - 2014Chip: ID48(GCC / Europe cars)B7 slot key (Europe / GCC); some cars use ID46

Key with a blade (regular or flip)

  • 1995 - 1997Chip: ID33Blade: HU66(GCC / Europe cars)B4, immobiliser 1
  • 1997 - 1999Chip: ID13Blade: HU66(GCC / Europe cars)B5 early cars
  • 2000 - 2005Chip: ID48Blade: HU66B5 / B5.5, immobiliser 3
  • 2012 - 2016Chip: ID48315 MHzBlade: HU66FCC: NBG010180T(US / Canada cars)NMS (US built) flip key, immobiliser 4 cluster
  • 2015 - 2021This yearChip: Megamos AES(GCC / Europe cars)B8 (MQB), MQB48 key; keyless versions too
  • 2017 - 2022This yearChip: Megamos AES315 MHzBlade: HU66FCC: NBGFS93N(US / Canada cars)NMS facelift flip key, MQB-type chip; read the original key

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Volkswagen Passat 2017?

2 listings fit the Volkswagen Passat 2017: smart keys, flip keys, remote keys and key shells, in 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Volkswagen Passat 2017 remote use?

Every remote listed for the Volkswagen Passat 2017 transmits on 315 MHz.

Which transponder chip does the Volkswagen Passat 2017 key use?

The listings for this car carry: MQB48 (Megamos AES). Check the chip in each listing's specifications.

Which FCC IDs do Volkswagen Passat 2017 remotes carry?

The remotes listed for this car carry FCC ID NBGFS93N. Match it with the FCC ID printed on your original remote.

Which blade profile does the Volkswagen Passat 2017 key use?

The blades listed for this car: HU66.

Which tools program a Volkswagen Passat 2017 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, OBDSTAR X300 Mini (VW), Advanced Diagnostics Smart Pro, Autel KM100 (IKEY universal smart key), Xhorse VVDI Key Tool Max and Xhorse VVDI Key Tool Plus for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.