Skip to content

Volkswagen Touran 2019 Key Fob & Car Keys

Keys that fit the 2017–2019 Volkswagen Touran: smart keys, flip keys and remote keys, 3 buttons, FCC ID NBGFS125C, MQB48 (Megamos AES) or MQB49 (HITAG Pro) chip, 433 MHz. 4 compatible keys, remotes & shells (genuine and aftermarket) available for the 2019 Volkswagen Touran.

Last updated: 18 November 2026

Key specifications for the Volkswagen Touran 2017–2019

Key types
smart keys, flip keys, remote keys, key shells, emergency blades and key blanks
Frequency
433 MHz
Buttons
3-button
Transponder chip
MQB48 (Megamos AES) · MQB49 (HITAG Pro)
Blade profile
HU66 · HU162T
Part numbers
5G6 959 752 CJ · 5G6 959 752 BL
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Volkswagen parts catalogue, with the specifications on each listing. Every remote listed for the Volkswagen Touran 2017–2019 transmits on 433 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Volkswagen Touran 2019 key

Smart key (push to start)

3 tools list this key. 2 of them list all keys lost.

Key with a blade (regular or flip)

7 tools list this key. 4 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
  • OBDSTAR X300 Mini (VW)
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
    • Add key(non-US cars)
    • All keys lost(non-US cars)
    Needs: Autel XP400 Pro
    • Add key(non-US cars)
    • All keys lost(non-US cars)
    Needs: Autel XP400 Pro
  • Advanced Diagnostics Smart Pro
    • Add key
    • Remote
    Needs: AD ADC2000 cable, AD Smart Aerial
    • Add key(non-US cars)
  • Xhorse VVDI2
    • Add key(non-US cars)

All keys lost is listed by OBDSTAR Key Master G3, OBDSTAR X300 Mini (VW), Autel IM508S and Autel IM608 II / IM608 Pro II. Advanced Diagnostics Smart Pro, Xhorse VVDI Key Tool Plus and Xhorse VVDI2 list add key only.

Programming steps

Add key - Autel MaxiIM IM608 / IM508S + XP400 Pro(GCC / Europe cars)

Needs: working key, blank MQB remote key (original or aftermarket MQB), internet connection

  1. Connect by OBD with the tablet online and the XP400 Pro on USB; open IMMO, Volkswagen, Advanced mode, MQB, Key learning.
  2. Switch the ignition on with the working key and let the tool read the immo data; save it.
  3. Answer yes to make a dealer key and put the blank key in the XP400 Pro key slot.
  4. Go on to key adaptation, enter the total number of keys and switch the ignition on with each key in turn when told.
  5. Test start and remote with every key.
Watch out: Every key the customer keeps must be adapted in the same session. Newer MQB clusters may refuse an OBD read and need the cluster read on the bench.
Add key - Xhorse VVDI2 / Key Tool Plus (VAG)(GCC / Europe cars)

Needs: working key, blank MQB key, internet connection

  1. Connect by OBD and read the cluster EEPROM data where the tool asks; save it.
  2. Read the immo data and save it.
  3. Make the dealer key in the programmer.
  4. Reset the instrument cluster.
  5. Add the key: enter the key count and switch the ignition on with each key in turn.
  6. Reset the cluster again and test start and remote.
Watch out: Program every key the customer keeps in one session. Some Johnson Controls MQB clusters could not be read by VVDI2 by OBD (field reports); check the cluster type first.
All keys lost - Autel MaxiIM IM608 / IM508S + XP400 Pro(GCC / Europe cars)

Needs: blank MQB remote key (original or aftermarket; Autel says Xhorse MQB remotes failed), internet connection, pay-per-use credit

  1. Connect by OBD with the tablet online; open IMMO, Volkswagen, Advanced mode, MQB, All keys lost.
  2. Insert a blank key (or press START on a Kessy car) and read the immo data; the function is paid per use.
  3. Wait for the online calculation to finish.
  4. Make the dealer key with the blank in the XP400 Pro slot; repeat for each extra key.
  5. Run key adaptation: enter the number of keys and switch the ignition on for about 2 seconds with each key.
  6. Test start and remote with every key.
Watch out: All-keys-lost by OBD on MQB changes the immobilizer data: keys ordered from the dealer afterwards may need dealer online adaptation. Autel's OBD all keys lost covers VW / Audi MQB blade-key cars; Skoda and Seat MQB were not supported at the time.

Key type not stated by the list

2 tools list this key. 2 of them list all keys lost.

  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    PIN read function
  • Launch X-431 IMMO
    • All keys lost
    all keys lost on the bench

When the key changed

Key with a blade (regular or flip)

  • 2004 - 2010Chip: ID48433 MHzBlade: HU66(GCC / Europe cars)Touran 1T / 1T2, CAN ID48 key (immobiliser 4 in the cluster)
  • 2011 - 2015Chip: ID48433 MHzBlade: HU66(GCC / Europe cars)Touran 1T3, dealer-type ID48 flip key (5K0 837 202)
  • 2016 - 2023This yearChip: Megamos AES433 MHz(GCC / Europe cars)Touran 5T (MQB); some later keys are MQB49, read the original

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Volkswagen Touran 2017–2019?

4 listings fit the Volkswagen Touran 2017–2019: smart keys, flip keys, remote keys, key shells, emergency blades and key blanks, in 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Volkswagen Touran 2017–2019 remote use?

Every remote listed for the Volkswagen Touran 2017–2019 transmits on 433 MHz.

Which transponder chip does the Volkswagen Touran 2017–2019 key use?

The listings for this car carry: MQB48 (Megamos AES) · MQB49 (HITAG Pro). Check the chip in each listing's specifications.

Which FCC IDs do Volkswagen Touran 2017–2019 remotes carry?

The remotes listed for this car carry FCC ID NBGFS125C. Match it with the FCC ID printed on your original remote.

Which blade profile does the Volkswagen Touran 2017–2019 key use?

The blades listed for this car: HU66 · HU162T.

Which tools program a Volkswagen Touran 2017–2019 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, OBDSTAR X300 Mini (VW), Autel KM100 (IKEY universal smart key), Autel IM508S, Autel IM608 II / IM608 Pro II and Advanced Diagnostics Smart Pro for this car; 4 of them list all keys lost. Check your tool's latest coverage list before the job.