Skip to content
  1. Home
  2. Auto Key Programming
  3. EEPROMs
  4. 24C32 I2C Serial EEPROM Chip 32 Kbit SOIC-8 - Blank Memory IC for Automotive Module Repair - New
24C32 I2C Serial EEPROM Chip 32 Kbit SOIC-8 - Blank Memory IC for Automotive Module Repair - New

24C32 I2C Serial EEPROM Chip 32 Kbit SOIC-8 - Blank Memory IC for Automotive Module Repair - New

Aftermarket

SKU: B01696

$2.81
AED  10.00

In Stock

Specifications

Blank 24C32 I2C serial EEPROM, 32 Kbit (4096 x 8), SOIC-8 surface-mount package. One new chip for automotive module repair and data transfer.

Money-back protection:
Claim a refund if your order doesn't ship, is missing, or arrives with product issues
New · Blank

24C32 I2C Serial EEPROM Chip 32 Kbit SOIC-8

I2C bus · 32 Kbit (4096 x 8) · SOIC-8 surface mount · blank · 1 piece

32 Kbit
4096 x 8 memory
I2C
Two-wire bus
SOIC-8
Surface mount
1 g
Weight

⭐ The 24C32 is a 32 Kbit (4096 x 8) serial EEPROM with a two-wire I2C interface, supplied here blank in an 8-pin SOIC surface-mount package. It is used to replace a damaged or failed 24C32 memory chip on an electronic module, or to receive a data file copied from the original chip. The chip arrives empty, so the data is written with an EEPROM programmer before or after it is soldered to the board. One new chip is supplied per pack.

⚙️ Key features

32 Kbit capacity

Organised as 4096 x 8, the standard 24C32 memory size.

I2C interface

Two-wire serial bus with a clock line and a bidirectional data line.

SOIC-8 package

8-pin surface-mount body for soldering directly onto the module board.

Supplied blank

An empty chip, ready to take a data file from the original module.

💎 Benefits

Repairs a failed chip

Replaces a cracked, corroded or unreadable 24C32 without replacing the whole module.

Low-cost part

A memory chip costs a fraction of a replacement control unit.

Clean starting point

A blank chip avoids leftover data from a donor part.

Easy to stock

A 1 g component that fits in any parts drawer.

👥 Who it's for

Automotive locksmiths

EEPROM work on immobiliser and instrument modules.

Module repair benches

Replacing failed memory chips during board-level repair.

ECU and cluster specialists

Transferring data files onto a fresh chip.

Key shops and counter trade

Keeping common EEPROMs on the shelf for bench jobs.

🧰 Supported coverage

🔁 24C32 FAMILY MARKINGS
32 Kbit I2C EEPROM
AT24C32
32 Kbit I2C EEPROM
M24C32
32 Kbit I2C EEPROM
24LC32 / 24AA32
32 Kbit I2C EEPROM
CAT24C32
🧩 TYPICAL JOBS
Board-level repair
Replace a failed chip
Data transfer
Write a saved dump
Donor to new chip
Clone module data
Before ordering, read the marking on the original chip and check it is a 24C32 family I2C EEPROM in an SOIC-8 package. Voltage range varies by maker, so check it against the module.

📦 What's included

✅ IN THE BOX

✔ 1 x 24C32 I2C EEPROM, SOIC-8, blank

❌ NOT INCLUDED

✘ Data - write the module's file with an EEPROM programmer

✘ Programmer, adapter or clip - use your existing bench tools

📋 Specifications

💾 MEMORY
Type
Serial EEPROM
Capacity
32 Kbit
Organisation
4096 x 8
Interface
I2C
🧩 PACKAGE
Package
SOIC-8
Mounting
Surface mount
Pins
8
📦 PHYSICAL
State
Blank
Quantity
1 piece
Condition
New
Weight
1 g

Frequently Asked Questions

Common questions about this product

The 24C32 is a 32 Kbit serial EEPROM organised as 4096 x 8 with a two-wire I2C interface. This blank chip comes in an SOIC-8 surface-mount package and replaces a failed 24C32 memory chip on automotive and other electronic modules.
It is blank. The 24C32 chip arrives empty, so the module's data file has to be written to it with an EEPROM programmer. Save the dump from the original chip first, then write that file to this new chip before or after soldering.
No. The 24C32 uses the two-wire I2C bus, while 25-series SPI and 93-series Microwire chips use different buses and pinouts. Only a 24C32 family part such as AT24C32, M24C32, 24LC32 or CAT24C32 is a direct replacement on the board.
This 24C32 EEPROM is the SOIC-8 surface-mount package with eight gull-wing pins, soldered directly onto the board. DIP-8 through-hole and TSSOP-8 versions exist, so check the package, marking and pin count on the customer's original chip before ordering.
Use an EEPROM programmer that supports I2C 24-series chips, either with the chip in a SOIC-8 adapter before fitting or with a test clip on the board. Write the saved file, verify it, then fit or refit the chip to the module.
Common 32 Kbit I2C parts in the 24C32 family include AT24C32, M24C32, 24LC32, 24AA32 and CAT24C32. Pinout and capacity match, but voltage ranges vary by maker, so compare the original chip marking and the module supply before fitting.
One. This pack contains a single new, blank 24C32 I2C EEPROM in the SOIC-8 package, weighing about 1 g. It does not include a programmer, adapter, test clip or data file, which remain part of the bench tools.

Last updated: 18 November 2026