Skip to content
  1. Home
  2. Auto Key Programming
  3. EEPROMs
  4. 95040 SPI Serial EEPROM Chip 4 Kbit SOIC-8 - Blank Memory IC for Automotive Module Repair - New
95040 SPI Serial EEPROM Chip 4 Kbit SOIC-8 - Blank Memory IC for Automotive Module Repair - New

95040 SPI Serial EEPROM Chip 4 Kbit SOIC-8 - Blank Memory IC for Automotive Module Repair - New

Aftermarket

SKU: B01709

$2.81
AED  10.00

In Stock

Specifications

Blank 95040 SPI serial EEPROM, 4 Kbit (512 x 8), SOIC-8 surface-mount package. One new chip for automotive module repair and data transfer.

Money-back protection:
Claim a refund if your order doesn't ship, is missing, or arrives with product issues
New · Blank

95040 SPI Serial EEPROM Chip 4 Kbit SOIC-8

SPI bus · 4 Kbit (512 x 8) · SOIC-8 surface mount · blank · 1 piece

4 Kbit
512 x 8 memory
SPI
Serial bus
SOIC-8
Surface mount
1 g
Weight

⭐ The 95040 is a 4 Kbit (512 x 8) serial EEPROM with an SPI interface, supplied here blank in an 8-pin SOIC surface-mount package. It is used to replace a damaged or failed 95040 memory chip on an electronic module, or to receive a data file copied from the original chip. The chip arrives empty, so the data is written with an EEPROM programmer before or after it is soldered to the board. One new chip is supplied per pack.

⚙️ Key features

4 Kbit capacity

Organised as 512 x 8, the standard 95040 memory size.

SPI interface

Four-wire serial bus with chip select, clock, data in and data out.

SOIC-8 package

8-pin surface-mount body for soldering directly onto the module board.

Supplied blank

An empty chip, ready to take a data file from the original module.

💎 Benefits

Repairs a failed chip

Replaces a cracked, corroded or unreadable 95040 without replacing the whole module.

Low-cost part

A memory chip costs a fraction of a replacement control unit.

Clean starting point

A blank chip avoids leftover data from a donor part.

Easy to stock

A 1 g component that fits in any parts drawer.

👥 Who it's for

Automotive locksmiths

EEPROM work on immobiliser and instrument modules.

Module repair benches

Replacing failed memory chips during board-level repair.

ECU and cluster specialists

Transferring data files onto a fresh chip.

Key shops and counter trade

Keeping common EEPROMs on the shelf for bench jobs.

🧰 Supported coverage

🔁 95040 FAMILY MARKINGS
4 Kbit SPI EEPROM
M95040
4 Kbit SPI EEPROM
AT25040
4 Kbit SPI EEPROM
25LC040 / 25AA040
4 Kbit SPI EEPROM
CAT25040
🧩 TYPICAL JOBS
Board-level repair
Replace a failed chip
Data transfer
Write a saved dump
Donor to new chip
Clone module data
Before ordering, read the marking on the original chip and check it is a 95040 family SPI EEPROM in an SOIC-8 package. Voltage range varies by maker, so check it against the module.

📦 What's included

✅ IN THE BOX

✔ 1 x 95040 SPI EEPROM, SOIC-8, blank

❌ NOT INCLUDED

✘ Data - write the module's file with an EEPROM programmer

✘ Programmer, adapter or clip - use your existing bench tools

📋 Specifications

💾 MEMORY
Type
Serial EEPROM
Capacity
4 Kbit
Organisation
512 x 8
Interface
SPI
🧩 PACKAGE
Package
SOIC-8
Mounting
Surface mount
Pins
8
📦 PHYSICAL
State
Blank
Quantity
1 piece
Condition
New
Weight
1 g

Frequently Asked Questions

Common questions about this product

The 95040, also written M95040, is a 4 Kbit serial EEPROM organised as 512 x 8 with an SPI interface. This blank chip comes in an SOIC-8 surface-mount package and replaces a failed 95040 memory chip on automotive and other modules.
It is blank. The 95040 chip arrives empty, so the module's data file has to be written to it with an EEPROM programmer. Save the dump from the original chip first, then write that file to this new chip before or after soldering.
Yes, they are the same part. M95040 is ST's name and 25040 is the generic name for the 4 Kbit SPI EEPROM organised as 512 x 8. Parts such as M95040, AT25040 and 25LC040 all interchange, provided the package and voltage match.
This 95040 EEPROM is the SOIC-8 surface-mount package with eight gull-wing pins, soldered directly onto the board. DIP-8 through-hole and TSSOP-8 versions exist, so check the package, marking and pin count on the customer's original chip before ordering a replacement.
Use an EEPROM programmer that supports SPI 25-series and 95-series chips, either with the chip in a SOIC-8 adapter before fitting or with a test clip on the board. Write the saved file, verify it, then fit or refit the chip.
No. The 95040 uses the four-wire SPI bus, while 24-series I2C and 93-series Microwire chips use different buses and pinouts. Only a 95040 or 25040 family part such as M95040, AT25040 or 25LC040 is a direct replacement on the board.
One. This pack contains a single new, blank 95040 SPI EEPROM in the SOIC-8 package, weighing about 1 g. It does not include a programmer, adapter, test clip or data file, which remain part of the bench tools.

Last updated: 18 November 2026