Skip to content
  1. Home
  2. Auto Key Programming
  3. EEPROMs
  4. 95320 SPI Serial EEPROM Chip 32 Kbit SOIC-8 - Blank Memory IC for Automotive Module Repair - New
95320 SPI Serial EEPROM Chip 32 Kbit SOIC-8 - Blank Memory IC for Automotive Module Repair - New

95320 SPI Serial EEPROM Chip 32 Kbit SOIC-8 - Blank Memory IC for Automotive Module Repair - New

Aftermarket

SKU: B01713

$2.81
AED  10.00

In Stock

Specifications

Blank 95320 SPI serial EEPROM, 32 Kbit (4096 x 8), SOIC-8 surface-mount package. One new chip for automotive module repair and data transfer.

Money-back protection:
Claim a refund if your order doesn't ship, is missing, or arrives with product issues
New · Blank

95320 SPI Serial EEPROM Chip 32 Kbit SOIC-8

SPI bus · 32 Kbit (4096 x 8) · SOIC-8 surface mount · blank · 1 piece

32 Kbit
4096 x 8 memory
SPI
Serial bus
SOIC-8
Surface mount
1 g
Weight

⭐ The 95320 is a 32 Kbit (4096 x 8) serial EEPROM with an SPI interface, supplied here blank in an 8-pin SOIC surface-mount package. It is used to replace a damaged or failed 95320 memory chip on an electronic module, or to receive a data file copied from the original chip. The chip arrives empty, so the data is written with an EEPROM programmer before or after it is soldered to the board. One new chip is supplied per pack.

⚙️ Key features

32 Kbit capacity

Organised as 4096 x 8, the standard 95320 memory size.

SPI interface

Four-wire serial bus with chip select, clock, data in and data out.

SOIC-8 package

8-pin surface-mount body for soldering directly onto the module board.

Supplied blank

An empty chip, ready to take a data file from the original module.

💎 Benefits

Repairs a failed chip

Replaces a cracked, corroded or unreadable 95320 without replacing the whole module.

Low-cost part

A memory chip costs a fraction of a replacement control unit.

Clean starting point

A blank chip avoids leftover data from a donor part.

Easy to stock

A 1 g component that fits in any parts drawer.

👥 Who it's for

Automotive locksmiths

EEPROM work on immobiliser and instrument modules.

Module repair benches

Replacing failed memory chips during board-level repair.

ECU and cluster specialists

Transferring data files onto a fresh chip.

Key shops and counter trade

Keeping common EEPROMs on the shelf for bench jobs.

🧰 Supported coverage

🔁 95320 FAMILY MARKINGS
32 Kbit SPI EEPROM
M95320
32 Kbit SPI EEPROM
AT25320
32 Kbit SPI EEPROM
25LC320 / 25AA320
32 Kbit SPI EEPROM
CAT25320
🧩 TYPICAL JOBS
Board-level repair
Replace a failed chip
Data transfer
Write a saved dump
Donor to new chip
Clone module data
Before ordering, read the marking on the original chip and check it is a 95320 family SPI EEPROM in an SOIC-8 package. Voltage range varies by maker, so check it against the module.

📦 What's included

✅ IN THE BOX

✔ 1 x 95320 SPI EEPROM, SOIC-8, blank

❌ NOT INCLUDED

✘ Data - write the module's file with an EEPROM programmer

✘ Programmer, adapter or clip - use your existing bench tools

📋 Specifications

💾 MEMORY
Type
Serial EEPROM
Capacity
32 Kbit
Organisation
4096 x 8
Interface
SPI
🧩 PACKAGE
Package
SOIC-8
Mounting
Surface mount
Pins
8
📦 PHYSICAL
State
Blank
Quantity
1 piece
Condition
New
Weight
1 g

Frequently Asked Questions

Common questions about this product

The 95320, also written M95320, is a 32 Kbit serial EEPROM organised as 4096 x 8 with an SPI interface. This blank chip comes in an SOIC-8 surface-mount package and replaces a failed 95320 memory chip on automotive and other modules.
It is blank. The 95320 chip arrives empty, so the module's data file has to be written to it with an EEPROM programmer. Save the dump from the original chip first, then write that file to this new chip before or after soldering.
No. The 95320 uses the four-wire SPI bus, while 24-series chips use I2C and 93-series chips use Microwire, each with a different pinout. Only a 95320 family part such as M95320, AT25320 or 25LC320 is a direct replacement on the board.
This 95320 EEPROM is the SOIC-8 surface-mount package with eight gull-wing pins, soldered directly onto the board. DIP-8 through-hole and TSSOP-8 versions exist, so check the package, marking and pin count on the customer's original chip before ordering.
Use an EEPROM programmer that supports SPI 25-series and 95-series chips, either with the chip in a SOIC-8 adapter before fitting or with a test clip on the board. Write the saved file, verify it, then fit or refit the chip.
Common 32 Kbit SPI parts in this family include M95320, AT25320, 25LC320, 25AA320 and CAT25320. Pinout and capacity match, but voltage ranges vary by maker, so compare the original chip marking and the module supply voltage before fitting a replacement.
One. This pack contains a single new, blank 95320 SPI EEPROM in the SOIC-8 package, weighing about 1 g. It does not include a programmer, adapter, test clip or data file, which remain part of the bench tools.

Last updated: 18 November 2026