Skip to content
  1. Home
  2. Auto Key Programming
  3. Adapters
  4. CGDI M35080 / 35160 Adapter - for CG Pro 9S12, 080DQ / 160DQ / 35080 / 35128 Cluster Memory Chips - Genuine · New
CGDI M35080 / 35160 Adapter - for CG Pro 9S12, 080DQ / 160DQ / 35080 / 35128 Cluster Memory Chips - Genuine · New

CGDI M35080 / 35160 Adapter - for CG Pro 9S12, 080DQ / 160DQ / 35080 / 35128 Cluster Memory Chips - Genuine · New

Genuine new

SKU: B09188

$21.07
AED  75.00

In Stock

Specifications

CGDI M35080 / 35160 adapter for the CG Pro 9S12: read and write 080DQ, 160DQ, 35080 and 35128 cluster memory chips on the bench.

Money-back protection:
Claim a refund if your order doesn't ship, is missing, or arrives with product issues
Genuine · New

CGDI M35080 / 35160 Adapter

Chip adapter for the CG Pro 9S12 · M35080 family memory chips · 8-pin socket and pads · instrument cluster repair

M35080
Chip family
8-pin
Chip socket
CG Pro 9S12
Host programmer
Plug and play
No activation

⭐ The CGDI M35080 / 35160 adapter lets the CG Pro 9S12 read and write the M35080 family memory chips found in instrument clusters. The chip sits in the 8-pin socket on the board, or is wired to the pads next to it, and the board plugs into the host. Cluster technicians use it to back up, repair and transfer cluster data, for example to a replacement cluster.

⚙️ Key features

M35080 family chips

080DQ, 160DQ, 35080 VP, 35080 V3 / V5 / V6, 35160 and 35128 standard variants.

8-pin socket and pads

The removed chip clamps in the socket; the pads beside it take wired connections.

Direct host plug

The board plugs straight into the CG Pro 9S12.

No setup

Works with the CG Pro 9S12 software as installed, no licence step.

💎 Benefits

Cluster bench restored

Replaces a lost or worn adapter without buying a new full kit.

Single-part repair

Only the failed adapter is replaced, the host stays as it is.

Safe backups

Read and save the chip before any repair, so the original data can go back.

Same workflow

Existing procedures in the CG Pro software stay unchanged.

👥 Who it's for

Cluster repair specialists

Instrument cluster memory read, repair and data transfer.

Bench programmers

General M35080 family chip work on the CG Pro 9S12.

Locksmith and repair shops

Keeping a spare adapter for daily CG Pro bench jobs.

🧰 Supported coverage

💾 CHIPS
Supported
080DQ (M35080DQ), 160DQ (M35160DQ), 35080 VP, 35080 V3 / V5 / V6, 35160, 35128
Not supported
35160WT and 35128WT; use the separate 35160WT adapter
🔧 USE IT FOR
BMW clusters
Clusters with 080DQ, 160DQ and 35080 chips
Other clusters
Clusters with a supported M35080 family chip listed in the CG Pro software
Data transfer
Copy cluster data to a replacement cluster
🧪 WORKS WITH
Programmer
CG Pro 9S12
Read the chip marking before ordering: a 35160WT or 35128WT chip needs the separate 35160WT adapter.

📦 What's included

✅ IN THE BOX

✔ 1 × CGDI M35080 / 35160 adapter for CG Pro 9S12

❌ NOT INCLUDED

✘ CG Pro 9S12 host, USB cable and other adapters

✘ 35160WT adapter

✘ Hot air station and soldering tools

📋 Specifications

💾 ADAPTER
Type
Memory chip adapter board
Host device
CG Pro 9S12 programmer
Chip family
M35080 / M35160 standard variants
Chip seat
8-pin socket plus solder pads
CGDI item reference
SK238-2
Activation
Not required
📦 GENERAL
Condition
Genuine · New
Brand
CGDI

Frequently Asked Questions

Common questions about this product

It reads and writes the standard M35080 family chips: 080DQ (M35080DQ), 160DQ (M35160DQ), 35080 VP, 35080 V3, V5 and V6, 35160 and 35128. The WT variants, 35160WT and 35128WT, are not covered by this adapter and need the separate CGDI 35160WT adapter.
No. The 35160WT and 35128WT chips need the separate CGDI 35160WT adapter, which is a different item. Read the marking on the chip in the cluster before you order, because a WT chip and a standard 35160 look almost the same on the board.
The board has an 8-pin socket that clamps a removed chip, with solder pads next to it for wired connections. Lifting the chip from the cluster board needs hot air rework on the bench, so plan for the time to remove and refit it.
It needs the CG Pro 9S12 programmer with its software activated on a PC. The adapter plugs straight into the host and has no function on its own. It is made for the CG Pro 9S12 host, so check that you own one first.
Cluster technicians use it to read, back up, repair and write the memory chip of an instrument cluster, for example to move the data of a damaged cluster to a replacement unit. Changing a recorded mileage is illegal in many countries, so use it for repair only.
Yes. Read the chip twice, compare the two files and keep a copy before any write. If a write goes wrong, the saved file can be written back so the cluster returns to its original state. Keep the file with the job record.
You receive one CGDI M35080 / 35160 adapter board for the CG Pro 9S12. The host, its USB cable, power supply, the 35160WT adapter, the other CG Pro adapters and any hot air or soldering tools are not included and are sold separately where available.

Last updated: 18 November 2026