Genuine new
SKU: B03950

Genuine new
SKU: B09191
In Stock
Specifications
| Specification | Value |
|---|---|
| Manufacturers | CGDI |
| Country of Manufacture | China |
| Color | Black |
| Condition | Genuine Brand New |
| Vehicle Make | Mercedes Benz |
| Weight | 0.65 kg |
Genuine CGDI bench platform for testing Mercedes FBS3 EIS and ELV units off the vehicle, with a built-in instrument cluster emulator.
Instrument cluster emulator · 25 Mercedes EIS types · FBS3 · 12 V bench supply · item HKSK286
⭐ The CGDI MB Benz EIS / ELV testing platform is a bench harness with a built-in instrument cluster emulator, used to power up and test Mercedes FBS3 EIS units outside the vehicle. CGDI's own manual calls it an analog instrument, which is exactly what it does - it stands in for the cluster so a bench EIS sees a plausible bus and behaves as if it were still fitted. It also emulates the ELV on most chassis, monitors EIS status over the CAN line, and passes a Mercedes programmer through to the EIS over its OBD port. It is a test platform, not a programmer.
Built-in cluster emulator
The board substitutes for the instrument cluster, so an EIS on the bench powers up and responds as though it were still installed in the car.
ELV emulation on most chassis
Removes the need for a physical steering lock on the bench across the supported range. W204, W207 and W212-old are the documented exceptions.
Live EIS status readout
The status area reports four states as you work - key inserted, key open at ACC, vehicle start and key pulled out - which is the verification sequence itself.
Work at the bench, not under the dash
The EIS comes out once and everything else happens on the desk, which turns awkward in-car sessions into controlled bench work.
Prove the job before reassembly
A repaired or renewed EIS and a freshly programmed key can both be verified off the vehicle before the dash goes back together.
Passes through to your own programmer
The OBD port takes a Mercedes programmer rather than locking the bench to one brand. CGDI states support for mainstream Mercedes equipment.
Mercedes-focused locksmiths
All-keys-lost and spare-key work on FBS3 Mercedes, done on the bench instead of in the car.
EIS repair and renewal specialists
Verifies a renewed or virginised EIS responds correctly before it goes back into a vehicle.
Key shops and workshops
Turns a Mercedes immobiliser job into repeatable bench work with a visible status readout.
Common questions about this product
Last updated: 2 October 2026
Genuine new
SKU: B03950
Genuine new
SKU: B03953
Genuine new
SKU: B03952
Genuine new
SKU: B03589
Genuine new
SKU: B03588
Genuine new
SKU: B03587
Genuine new
SKU: B03586
Genuine new
SKU: B03585
Software
SKU: B03719
Software
SKU: B03718