Skip to content
  1. Home
  2. Keys and Remotes
  3. Garage Remotes
  4. Face to Face Copy Remote 4-button - 315MHz · Fixed Code Duplicator for Garage Doors and Gates - Aftermarket · New
Face to Face Copy Remote 4-button - 315MHz · Fixed Code Duplicator for Garage Doors and Gates - Aftermarket · New

Face to Face Copy Remote 4-button - 315MHz · Fixed Code Duplicator for Garage Doors and Gates - Aftermarket · New

Aftermarket

SKU: B01622

$4.21
AED  15.00
  • 315 MHzFrequency
  • 4-buttonButtons

In Stock

Specifications

Aftermarket face to face copy remote, 4 buttons, 315 MHz, clones fixed-code garage, gate and barrier remotes. Not for rolling code.

Money-back protection:
Claim a refund if your order doesn't ship, is missing, or arrives with product issues
Aftermarket · New

Face to Face Copy Remote - 4 Buttons, 315 MHz

4 buttons · 315 MHz · fixed code only · copies up to four remotes, one per button

4
Buttons
315 MHz
Frequency
Fixed
Code type
30 g
Weight

⭐ This aftermarket 4-button face to face copy remote learns the signal of an existing fixed-code remote on 315 MHz and stores it on one of its buttons, so a single fob can replace up to four garage door, gate or barrier transmitters. Copying is done by hand, holding the original and this remote together, with no programmer needed. It works only with fixed-code systems on the 315 MHz band; rolling-code and two-way remotes cannot be cloned. For 433 MHz systems, the matching 433 MHz version is the part to order.

⚙️ Key features

Face to face cloning

Learns the code by holding the original remote against it, with no tool required.

Four independent buttons

Each button stores its own copied code, so four remotes fit on one fob.

315 MHz band

Matches fixed-code remotes that transmit on 315 MHz.

Fixed code only

Designed for fixed-code transmitters, not rolling-code or two-way systems.

💎 Benefits

Quick counter job

A spare gate or garage remote is copied while the customer waits.

Fewer fobs to carry

One remote replaces several fixed-code transmitters on the same band.

No programming tool

The copy is made by hand, so no diagnostic equipment is tied up.

👥 Who it's for

Locksmiths

Duplicating garage and gate remotes for walk-in customers.

Property and facility managers

Spare remotes for residents on fixed-code gates and barriers.

Key shops and counter trade

A fast copy service alongside key cutting.

🧰 Supported coverage

✅ COPIES (FIXED CODE, 315 MHz)
Garage door remotes
Sliding and swing gate remotes
Parking barrier remotes
Fixed-code alarm and appliance remotes
❌ CANNOT COPY
Rolling-code (code hopping) remotes
Two-way remotes
Car smart keys and transponder keys
Remotes on 433 MHz or other bands
Before ordering, check that the original remote is fixed code and transmits on 315 MHz. A rolling-code or 433 MHz remote will not copy to this unit.

📦 What's included

✅ IN THE BOX

✔ Aftermarket 4-button face to face copy remote, new

❌ NOT INCLUDED

✘ Receiver or gate motor - this unit copies an existing remote only

✘ Rolling-code support - choose a remote made for that system

📋 Specifications

📡 REMOTE
Frequency
315 MHz
Buttons
4
Code type
Fixed code
Copy method
Face to face, by hand
🧩 COVERAGE
Codes per button
1
Maximum copied remotes
4
Rolling code
Not supported
Two-way remotes
Not supported
📦 PHYSICAL
Condition
Aftermarket · New
Weight
30 g
Brand
DKEY1

🛠️ Programming instructions

FACE TO FACE COPY - NO TOOL REQUIRED

Copy the original 315 MHz fixed-code remote onto any of the four buttons. LED signals vary by production run, so read them from the instruction sheet.

1Place the original remote and this copy remote face to face, close together.
2Press and hold the button to copy on the original, then press and hold the chosen button on the copy remote.
3Keep both held until the copy remote's LED shows the copy signal described in the instruction sheet.
4Release both, then test the new button at the gate or door. Repeat for the other buttons.
Check coverage first: copying works only when the original is a fixed-code remote on 315 MHz. If the gate does not respond, check the original's band and code type first.

Frequently Asked Questions

Common questions about this product

This copy remote learns the signal of an existing fixed-code remote on 315 MHz and stores it on one of its four buttons. Held face to face with the original, it clones garage door, gate and barrier transmitters without any programming tool.
No. This copy remote works only with fixed-code remotes. Rolling-code and two-way remotes change their code on every press, so they cannot be cloned face to face. Check the original remote's code type before ordering this 315 MHz copy unit.
This copy remote works on 315 MHz and can only clone remotes on the same band. For gates and garage doors that use 433 MHz remotes, order the 433 MHz version instead, since a remote on another band will not copy.
Up to four. Each of the four buttons on this copy remote stores one copied code, so a single fob can replace four fixed-code 315 MHz transmitters. Copying onto a button again replaces the code that was already stored on that button.
No. This copy remote does not copy car smart keys, remote keys with immobiliser transponders, or rolling-code car remotes. Its use on vehicles is limited to fixed-code aftermarket alarm remotes on 315 MHz, the same as for gates and doors.
Hold the original and this copy remote face to face, press and hold the button on the original, then press and hold the chosen button on the copy remote until its LED shows the copy signal from the instruction sheet. Then test it.
The box holds one new aftermarket 4-button face to face copy remote on 315 MHz, weighing about 30 g. It copies an existing remote only, so no receiver or gate motor is included, and rolling-code systems need a different remote.

Last updated: 2 October 2026