Skip to content
  1. Home
  2. Keys and Remotes
  3. Garage Remotes
  4. Face to Face Copy Remote 4-button - 433MHz · Fixed Code Duplicator for Garage Doors and Gates - Aftermarket · New
Face to Face Copy Remote 4-button - 433MHz · Fixed Code Duplicator for Garage Doors and Gates - Aftermarket · New

Face to Face Copy Remote 4-button - 433MHz · Fixed Code Duplicator for Garage Doors and Gates - Aftermarket · New

Aftermarket

SKU: B01623

$4.21
AED  15.00
  • 433 MHzFrequency
  • 4-buttonButtons

In Stock

Specifications

Aftermarket 4-button face to face copy remote for 433 MHz fixed-code gate, garage and barrier remotes. Not for rolling-code systems.

Money-back protection:
Claim a refund if your order doesn't ship, is missing, or arrives with product issues
Aftermarket · New

Face to Face Copy Remote - 4 Buttons, 433 MHz

4 buttons · 433 MHz · fixed code only · copies up to four remotes, one per button

4
Buttons
433 MHz
Frequency
Fixed
Code type
30 g
Weight

⭐ Built for the 433 MHz band used by most gate, barrier and garage door systems in Europe, the Middle East and Asia, this aftermarket face to face copy remote clones a fixed-code transmitter onto any of its 4 buttons. The original and the copy are held together and the code is learned by hand, so four separate fixed-code remotes can live on one fob. Rolling-code and two-way systems are outside its range, and a 315 MHz original needs the 315 MHz version.

⚙️ Key features

Learns by contact

The code is taken straight from the original held against it; no programmer is used.

Four storage buttons

A separate code on every button, for up to four gates or doors on one fob.

433 MHz transmitter

The band most fixed-code gate and garage systems use outside North America.

Fixed-code systems

Made for fixed-code transmitters; rolling-code and two-way remotes are excluded.

💎 Benefits

Copy at the counter

The customer leaves with a working spare remote after a short copy job.

One fob, several sites

Home gate, garage and work barrier can share a single remote.

No equipment needed

Copying is a hand procedure, so no programmer or computer is involved.

👥 Who it's for

Locksmiths

Gate and garage remote duplication as a walk-in service.

Building and compound managers

Extra remotes for tenants on fixed-code gates and car park barriers.

Key shops and counter trade

A copy service that sits next to the key-cutting machine.

🧰 Supported coverage

✅ COPIES (FIXED CODE, 433 MHz)
Garage door remotes
Sliding and swing gate remotes
Parking barrier remotes
Fixed-code alarm and appliance remotes
❌ CANNOT COPY
Rolling-code (code hopping) remotes
Two-way remotes
Car smart keys and transponder keys
Remotes on 315 MHz or other bands
Before ordering, check that the original remote is fixed code and transmits on 433 MHz. A rolling-code or 315 MHz remote will not copy to this unit.

📦 What's included

✅ IN THE BOX

✔ Aftermarket 4-button face to face copy remote, new

❌ NOT INCLUDED

✘ Receiver or gate motor - this unit copies an existing remote only

✘ Rolling-code support - choose a remote made for that system

📋 Specifications

📡 REMOTE
Frequency
433 MHz
Buttons
4
Code type
Fixed code
Copy method
Face to face, by hand
🧩 COVERAGE
Codes per button
1
Maximum copied remotes
4
Rolling code
Not supported
Two-way remotes
Not supported
📦 PHYSICAL
Condition
Aftermarket · New
Weight
30 g
Brand
DKEY1

🛠️ Programming instructions

FACE TO FACE COPY - NO TOOL REQUIRED

Copy the original 433 MHz fixed-code remote onto any of the four buttons. LED signals vary by production run, so read them from the instruction sheet.

1Place the original remote and this copy remote face to face, close together.
2Press and hold the button to copy on the original, then press and hold the chosen button on the copy remote.
3Keep both held until the copy remote's LED shows the copy signal described in the instruction sheet.
4Release both, then test the new button at the gate or door. Repeat for the other buttons.
Check coverage first: copying works only when the original is a fixed-code remote on 433 MHz. If the gate does not respond, check the original's band and code type first.

Frequently Asked Questions

Common questions about this product

This 433 MHz copy remote clones an existing fixed-code transmitter by being held face to face with it, then keeps that code on one of its four buttons. It suits garage doors, sliding gates and parking barriers, and no programming tool is involved.
No. A rolling-code or two-way remote sends a different code each time it is pressed, so this copy remote cannot learn it. Only fixed-code 433 MHz originals can be cloned, so check the code type of the customer's remote before ordering.
This copy remote transmits and learns on 433 MHz, the band most gate and garage systems use in Europe, the Middle East and Asia. A 315 MHz original will not copy to it, so order the 315 MHz version for those systems.
Four. This copy remote keeps one learned code per button, so up to four fixed-code 433 MHz transmitters can be combined on one fob. Copying a new remote onto a used button overwrites the code that this button held before.
No. Car smart keys, transponder keys and rolling-code car remotes are outside what this copy remote can learn. On vehicles it only copies fixed-code aftermarket alarm remotes on 433 MHz, following the same procedure used for gates and garage doors.
Put the two remotes face to face, hold the original's button down, then hold the chosen button on this copy remote until its LED gives the copy signal shown on the instruction sheet. Release both and test the new button at the gate.
One new aftermarket 4-button face to face copy remote on 433 MHz, weighing about 30 g. It needs a working original to copy from, so there is no receiver or motor in the box, and rolling-code gates need a different remote.

Last updated: 2 October 2026