Skip to content
  1. Home
  2. Key Accessories
  3. FBS4 Key Button Tactile Switch for Mercedes BGA - 450 gf, 0.70 mm Travel, Key PCB Repair - Aftermarket · New
FBS4 Key Button Tactile Switch for Mercedes BGA - 450 gf, 0.70 mm Travel, Key PCB Repair - Aftermarket · New

FBS4 Key Button Tactile Switch for Mercedes BGA - 450 gf, 0.70 mm Travel, Key PCB Repair - Aftermarket · New

Aftermarket

SKU: B03399

$1.69
AED  6.00

In Stock

Specifications

Aftermarket SMD tactile button switch for Mercedes BGA and FBS4 smart key PCBs: 450 gf, 0.70 mm travel, 250,000 cycles.

Money-back protection:
Claim a refund if your order doesn't ship, is missing, or arrives with product issues
Aftermarket · New

FBS4 Key Button Tactile Switch for Mercedes BGA

SMD tactile switch · 450 gf · 0.70 mm travel · 3.45 mm actuator · 250,000 cycles · -40 to 85 °C

450 gf
Operating force
0.70 mm
Travel
250,000
Rated cycles
-40 to 85 °C
Operating range

⭐ Lock, unlock and trunk buttons that feel dead or need a hard press on a Mercedes BGA or FBS4 smart key usually point to a worn tactile switch on the board. This aftermarket SMD switch is soldered onto the key PCB in place of the failed one, with a 450 gf operating force, 0.70 mm travel and a 3.45 mm actuator height. The repair is purely mechanical and leaves the key data untouched.

⚙️ Key features

Fits BGA and FBS4 boards

Made for the switch footprint on Mercedes BGA (FBS3) and FBS4 smart key PCBs.

Defined click

450 gf operating force and 0.70 mm travel give a clear tactile feel.

250,000-cycle life

Rated for a long service life in a daily-use key.

-40 to 85 °C

Rated operating range for a key carried in a car.

💎 Benefits

Saves the key

A switch swap costs a fraction of a new key and a programming session.

Quick bench job

Desolder, fit, test, reassemble.

Key data untouched

No EIS work and no key programming after the repair.

Stock for walk-ins

Small parts that turn worn buttons into a same-day repair.

👥 Who it's for

Automotive locksmiths

Offering Mercedes key repair beside programming and replacement.

Remote repair benches

PCB-level smart key refurbishment.

Key shops with a soldering station

Walk-in button repairs on Mercedes keys.

🧰 Supported coverage

🔩 FITS
Mercedes BGA (FBS3)
Smart key PCB button switches
Mercedes FBS4
Smart key PCB button switches
🔥 USE IT FOR
Worn buttons
No response or a hard press needed
Broken switches
Cracked actuator or lifted switch
Key refurbishment
Fresh switches on a reused PCB
Compare the footprint and actuator height of the switch on your key board with this one before desoldering anything.

📦 What's included

✅ IN THE BOX

✔ 1 × SMD tactile button switch for Mercedes BGA / FBS4 key PCB

❌ NOT INCLUDED

✘ Key PCB, shell or blade

✘ Soldering tools, flux or solder

📋 Specifications

🔘 SWITCH
Type
SMD tactile push switch, normally open
Operating force
450 gf
Travel
0.70 mm
Actuator height
3.45 mm
Contact rating
0.1 A at 35 V AC / DC
Mechanical life
250,000 cycles
Operating temperature
-40 to 85 °C
Compliance
RoHS3
📦 GENERAL
Condition
Aftermarket · New
Brand
DKEY1

Frequently Asked Questions

Common questions about this product

It is made for the button switches on Mercedes BGA (FBS3) chrome smart keys and FBS4 smart key PCBs. Compare the footprint and the 3.45 mm actuator height with the switch on your key board before you desolder anything, because key boards vary between versions.
No. The switch only closes the button circuit on the board, so replacing it does not touch the key data, the transponder or the FBS information. After the repair, test each button near the car, and the key works as before with no programming.
It is a normally open SMD tactile switch with 450 gf operating force, 0.70 mm travel and a 3.45 mm actuator height. It is rated 0.1 A at 35 V AC or DC, 250,000 mechanical cycles and an operating range of -40 to 85 °C, RoHS3 compliant.
Open the key, take out the PCB and remove the failed switch with hot air or a fine iron tip and flux. Clean the pads, place the new switch the same way round, solder its legs, then test every button before refitting the board in the shell.
No. It is an aftermarket tactile switch for repairing Mercedes BGA and FBS4 key boards. It replaces a worn or broken switch on the original board, so the key keeps its own electronics and data while the button regains a clear click.
One order is one tactile switch. A key with several worn buttons needs one switch per button, so order the number of switches you plan to replace. Keeping a few spare switches on the bench also covers a pad or leg damaged during the repair.
The tactile switches on the key board wear with daily presses, and dirt or moisture can reach the contacts. A button then needs a hard press, works only sometimes or stops. When the other buttons still work, a new switch on that button usually restores it.

Last updated: 2 November 2026