Skip to content
  1. Home
  2. Keys and Remotes
  3. Smart Keys
  4. Jetour T1 2025 Smart Key 4-button 433MHz FSK - ID47 HITAG3 - Black - Genuine · OEM
Jetour T1 2025 Smart Key 4-button 433MHz FSK - ID47 HITAG3 - Black - Genuine · OEM

Jetour T1 2025 Smart Key 4-button 433MHz FSK - ID47 HITAG3 - Black - Genuine · OEM

Genuine new

SKU: B03268

$44.94
AED  160.00
  • 433 / 434 MHzFrequency
  • ID47Transponder
  • 4-buttonButtons

In Stock

Specifications

Genuine · OEM 4 button smart key for the Jetour T1 2025 in black, 433 MHz FSK with an ID47 HITAG3 chip. New without original packaging.

Money-back protection:
Claim a refund if your order doesn't ship, is missing, or arrives with product issues
Genuine · OEM · New, without original packaging

Jetour T1 2025 Smart Key 4 Buttons 433 MHz

4-button proximity key · 433 MHz FSK · ID47 HITAG3 NCF29A1X · black · blade not included

4
Buttons
433 MHz
FSK
ID47
HITAG3 transponder
Black
Housing colour

⭐ This is a genuine factory 4-button proximity smart key for the Jetour T1 2025, in the black housing, transmitting at 433 MHz with FSK modulation and carrying an ID47 HITAG3 transponder, NCF29A1X. The buttons are laid out as lock, unlock, tailgate and remote start, with passive entry and push-to-start. Being the factory part, the housing, radio behaviour and immobiliser response match the key the vehicle was built with rather than approximating it. The unit is new but supplied without the original packaging, it carries no emergency insert blade, and it is registered to the vehicle through the OBD-II port with a programmer that covers Chery and Jetour immobiliser systems.

⚙️ Key features

Genuine · OEM unit

Factory part rather than a copy, so the housing tolerances, button feel and radio stage are the ones the T1 immobiliser was validated against.

433 MHz FSK

Transmits at 433 MHz using FSK modulation, the scheme used by the Chery and Jetour proximity system on this platform. Some listings label the same band 434 MHz.

ID47 HITAG3 NCF29A1X

Carries the ID47 HITAG3 transponder, NCF29A1X, which is what the tool writes when the key is registered to the vehicle.

Lock, unlock, tailgate, start

Four buttons in the factory layout, with passive keyless entry and push-to-start, so the replacement behaves exactly like the key it follows.

💎 Benefits

Predictable programming

A factory key removes the usual aftermarket variables, so a failed write is far more likely to be a tool or vehicle issue than the key itself.

Like-for-like replacement

The customer keeps the same feel, range and button positions as the key being replaced, with no retraining on a different housing.

Same key, lighter packaging

The unit is new but ships without the original box, which suits a workshop that fits the key rather than presenting the carton.

Fewer comebacks

Matching radio behaviour and chip family reduces the intermittent range and start complaints that follow a mismatched replacement.

👥 Who it's for

Automotive locksmiths

Technicians cutting and coding spare or replacement keys for Chinese-market and export Jetour vehicles.

Key shops and counter trade

Counters stocking factory keys for the newer Chery and Jetour proximity platforms.

Dealers and garages

Workshops restoring a second working key before delivery, handover or resale.

Fleet operators

Fleets running T2 units that keep a factory spare on the shelf rather than waiting on supply.

🚗 Compatible vehicles

JETOURT12025🔩 also catalogued for 2024 builds; check against the original key
Before ordering, compare the customer key against this one: 4 buttons in the lock, unlock, tailgate and remote start layout, 433 MHz and an ID47 transponder. Chery and Jetour use several housings and chip types across the range, so match the fob body before committing.

📦 What's included

✅ IN THE BOX

✔ 1 x genuine factory 4-button smart key, assembled housing and board

✔ ID47 HITAG3 transponder fitted, unprogrammed

❌ NOT INCLUDED

✘ Emergency key blade - source and cut one separately

✘ Programming - register the key to the vehicle with a compatible OBD immobiliser tool

✘ Diagnostic tool, cable or software subscription - source separately

📋 Specifications

📡 REMOTE
Frequency
433 MHz, also listed as 434 MHz
Modulation
FSK
Buttons
4
Button functions
Lock, unlock, tailgate, remote start
Key type
Smart key, proximity, push-to-start
🔐 TRANSPONDER & BLADE
Transponder chip
ID47 HITAG3, NCF29A1X
Chip state
Unprogrammed
Emergency blade
Not included
📦 PHYSICAL & POWER
Colour
Black
Origin
Genuine · OEM
Condition
New, without original packaging
Battery
Not specified
Weight
60 g

🛠️ Programming instructions

OBD PROGRAMMING - DIAGNOSTIC TOOL REQUIRED

This is a proximity smart key with an ID47 immobiliser chip, so there is no driver seat sequence. Registration runs through the OBD-II port on a programmer that carries Chery and Jetour immobiliser coverage.

Tools: an immobiliser programmer with published Chery and Jetour coverage. Autel MaxiIM, Xhorse VVDI, OBDSTAR and Launch platforms all publish Chery coverage lists, so check yours for the T2 before quoting the job.
Add key (spare): with a working key present, open the immobiliser menu, select the Chery or Jetour platform and the model year, then run key registration and follow the tool prompts at the start button.
All keys lost: expect the tool to ask for the immobiliser PIN or password, read from the vehicle or calculated by the tool. Check your programmer supports this on the T2 before starting.
Procedure varies: the exact menu path and step order depend on the tool brand and the software version, so follow the on-screen procedure of your own tool rather than a generic sequence.
Check coverage first: support depends on the tool software version and the exact model year. Verify the vehicle is in the tool coverage list before the job.

Frequently Asked Questions

Common questions about this product

No. The Jetour T1 2025 smart key is supplied without an emergency insert blade. If the customer needs one, a matching blade has to be sourced and cut to the vehicle lock code separately, then fitted into the blade slot in the back of the fob housing.
The key is a genuine unused factory unit, but it is supplied loose rather than in the sealed Jetour carton. Electrically and mechanically it is the same part; only the retail box is missing, which suits a workshop that fits the key rather than presenting the packaging.
It transmits at 433 MHz with FSK modulation and carries an ID47 HITAG3 transponder, NCF29A1X. Some listings label the same band 434 MHz. Check the frequency and the chip against the key being replaced, because Chery uses more than one configuration across the Jetour range.
The layout covers lock and unlock on the centre column, tailgate release on the left face and remote start on the right face. There is no separate panic button on this housing, so check that the customer key carries the same four functions before ordering a replacement.
No. This is a proximity smart key with an immobiliser transponder, so there is no on-board or driver seat procedure. The key has to be registered through the OBD-II port using a programmer whose coverage list includes Chery and Jetour vehicles of this generation.
Expect the programmer to ask for the immobiliser PIN or password before it can register a key, either read from the vehicle or calculated by the tool. Check that your programmer supports all keys lost on the Jetour T1 before quoting or starting the job.
This listing is written for the Jetour T1 2025 in the black housing, and it is also catalogued for 2024 builds. Other Jetour models use different fob bodies, so compare the housing shape, the four-button layout and the transponder against the original key first.

Last updated: 12 November 2026

Related lookups:Jetour T1