Skip to content
  1. Home
  2. Keys and Remotes
  3. Remote Keys
  4. Kia Picanto 2011-2014 Flip Remote Key 2-button 433MHz - 95430-1Y300 4D-60
Kia Picanto 2011-2014 Flip Remote Key 2-button 433MHz - 95430-1Y300 4D-60

Kia Picanto 2011-2014 Flip Remote Key 2-button 433MHz - 95430-1Y300 4D-60

Used original

SKU: B08817

$16.85
AED  60.00
  • 433 MHzFrequency
  • 4D-60Transponder
  • 2-buttonButtons

In Stock

Specifications

Genuine used 2-button flip remote key for Kia Picanto 2011-2014, 433 MHz with a 4D-60 transponder, part 95430-1Y300. Key blade not included.

Money-back protection:
Claim a refund if your order doesn't ship, is missing, or arrives with product issues
Genuine · OEM · Used

Kia Picanto 2011-2014 Flip Remote Key 2 Buttons

2 buttons · 433 MHz · 4D-60 transponder · SEKS-KM10TX · 95430-1Y300 · blade not included

2
Buttons
433 MHz
Frequency
4D-60
Transponder chip
4D-60
Transponder chip

⭐ The Kia Picanto 2011-2014 flip remote key is a 2-button flip key built to part number 95430-1Y300, running at 433 MHz with a 4D-60 transponder on board and the approval marking SEKS-KM10TX. This is a genuine factory unit in used condition, and the key blade is not included. The Picanto also runs a later flip key on 95430-1Y600 with its own approval marking, so the part number is the deciding reference on this model. It suits locksmiths and key shops building a complete Picanto key from their own blade stock.

⚙️ Key features

433 MHz radio section

Transmits on 433 MHz, the frequency used on this Picanto generation. Check the marking on the original key before ordering.

2-button pad layout

A factory 2-button pad built to the 95430-1Y300 reference, with the flip blade channel ready for a blade cut to the car.

Genuine factory board

A factory-built key carrying the original approval marking, pulled from service stock rather than reproduced.

4D-60 transponder on board

The immobiliser transponder is already fitted, so no separate chip has to be sourced or cloned for the job.

💎 Benefits

Factory part at a lower cost

A used genuine key keeps original electronics in the job while leaving margin against a dealer-supplied part.

Flexible build-up

Supplied without a blade, so the housing is finished with the blade already matched to the customer vehicle.

Predictable radio behaviour

Factory boards register the way the vehicle expects, which removes the guesswork a mismatched replacement can bring.

Steady replacement demand

The Picanto stays on the road for years as a city car, which keeps the reference moving off the shelf.

👥 Who it's for

Automotive locksmiths

Technicians coding the remote and the transponder together through a diagnostic tool.

Key shops and counter trade

Shops that build up a flip housing with their own blade stock at the counter.

Used car dealers and garages

Traders making up a second key before a Picanto is handed over.

Fleet and rental workshops

Operators keeping small fleet cars in service with factory replacement keys.

🚗 Compatible vehicles

KIA Picanto 2011-2014 🔧 Trims fitted with the 2-button flip key on the 433 MHz build
Before ordering, match part number 95430-1Y300 printed on the original key. The Picanto also runs a later flip key on 95430-1Y600 with a different approval marking.

📦 What's included

✅ IN THE BOX

✔ 1 x genuine 2-button flip remote key, part number 95430-1Y300

✔ Factory housing carrying the original FCC ID marking

✔ Used genuine unit, supplied without original packaging

❌ NOT INCLUDED

✘ Key blade - match a blade to the original key and cut it

✔ 4D-60 transponder fitted on the key board

✘ Battery - fit a fresh cell of the size used in the original key

✘ Programming to the vehicle - remote and transponder are coded over OBD

📋 Specifications

📡 REMOTE
FCC ID
SEKS-KM10TX
Part number
95430-1Y300
Frequency
433 MHz
Buttons
2-button
🔑 PRODUCT TYPE
Key type
Flip remote key
Transponder chip
4D-60
Key blade
Not included
Blade profile
Not published
Proximity
Not applicable
📦 PHYSICAL & POWER
Battery
Not published
Condition
Used
Origin
Genuine · OEM
Weight
60 g
Color
Not specified
🔢 PART NUMBER REFERENCES
95430-1Y300 this part
95430-1Y600 Picanto, later key

🛠️ Programming instructions

OBD PROGRAMMING - DIAGNOSTIC TOOL REQUIRED

This is a chipped flip key, so the remote function and the 4D-60 transponder are both written to the vehicle with a diagnostic tool. There is no hand sequence that codes the immobiliser side.

Compatible tools: Autel IM508 and IM608, Xhorse VVDI Key Tool Plus, OBDSTAR key programmers and Launch X431 IMMO units all list Kia key and remote coding over OBD.
Add key (spare): with a working key present, read the security PIN, open the key registration routine, then present the new key at the ignition when the tool asks for it.
All Keys Lost: the PIN has to be obtained before the session and the routine writes the full key list in one pass, so every key the customer keeps has to be present and coded together.
Before you start: fit a fresh battery, cut and fit the blade so the door can still be opened, and keep a stable supply on the vehicle battery through the session.
Check coverage first: the menu path and step order depend on the tool brand and the software version. Verify the exact model year is in the tool's supported list before starting the job.

Frequently Asked Questions

Common questions about this product

Kia Picanto across 2011-2014, on trims fitted with the 2-button flip key on the 433 MHz build. Read the part number printed on the back of the original key before ordering this replacement, because the Picanto runs more than one key.
The 1Y600 is the later Picanto flip key and it carries its own approval marking, so the two are separate items even though the housings look alike. Read the number on the original rather than matching on shape.
Yes. A 4D-60 transponder is already fitted on the key board, so no separate chip has to be sourced or cloned. Both the transponder and the remote function are written to the vehicle in the same coding session.
No blade is supplied and the keyway is not published for this reference. Match a blade against the customer original key on the bench, fit it into the flip housing, then cut it to the door lock code before handover.
This build carries the approval marking SEKS-KM10TX rather than a North American FCC number, because it is not a North American market key. The part number and the frequency are what identify this key instead of an approval number on the housing.
No. The 4D-60 transponder has to be written to the immobiliser, so the job runs through the OBD-II port with a key programming tool. There is no hand sequence that codes the immobiliser side of this Picanto key.
The security data has to be obtained before the session, and the coding routine then writes the full key list in one pass. Every key the customer wants to keep has to be present and coded during that same session.
It is a genuine factory unit in used condition, pulled from service rather than reproduced. The housing and button pad may carry light handling marks, and the key ships without the original packaging, without dealer paperwork and without a battery.

Last updated: 2 October 2026